• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.55-85
• /
• 1996

지르코니아 분말은 ZrO2 결정상이 온도변화에 따라 부피변화를 수반하는 상전이변태를 나타낸다. 단사정 ZrO2가 110$0^{\circ}C$에서는 정방정으로, 2$700^{\circ}C$ 내외에서는 입방정으로 결정구조가 가역적으로 변한다. 이 ZrO2에 금속산화물을 고용시키면 형석 (CaF2:Florite)형의 입방정 결정구조가 실온에서도 안정하게 존재하게 된다. 안정화제 산화물은 caO, MgO등 2가 산화물외에 3가 또는 4가의 금속산화물로서 Sc2O3, Y2O3, Sm2O3, Nd2O3, Gd2O3, Y2O3, CeO2 등이며 이들은 금속이온의 원자가가 변하기 쉬운 희토류 산화물이다. 안정화 지르코니아는 형석형 결정구조이며 결정화학적으로 보면 금속양이온이 산소이온에 대해서 정육면체형의 8배위를 하고 있다. 이때 이온반경비(양이온/음이온)에 따라 Zr+4자리와 O-2자리의 격자위치와 모양이 형성되므로 비틀어진 정육면체구조이건 이상적인 정육면체 형석구조를 이룬다. 이는 지르코니아의 결정상의 2상-3상인 부분안정화 지르코니아다결정체(PSZ : partially stabilized zirconia)이거나 단일상-2상인 정방정 지르코니아다결정체(TZP : tetragonal zirconia polycrystal)의 결정구조를 가지는데 기인한다. PSZ는 주로 MgO, CaO를 안정화제로 고용시켜 입방정 영역에서 소결하고 이를 다시 입방정과 정방정의 상 영역에서 열처리하여 입방정 입자내부에 정방정을 석출 형성시킨 것이며 TZP는 Y2O3 및 CeO2를 고용시켜 PSZ와 다르게 일반적인 상압소결한 정방정 결정상의 미립자이다. 산화지르코늄 분말은 지르콘사에서 열분해시킨 지르코늄소결.융해괴(caustic fusion clinker)를 산처리하여얻어진 지르코늄산용액(zirconyl acid solution : cloride, sulfide, nitride 등)으로부터 제조된다. 고순도 산화지르코늄은 용액 결정석출법에 의해 ZrOCl2.8H2O, 5ZrO2.3SO3.15H2O, ZrO(NO3)2.xH2O 등의 지르코늄 수화물만을 재결정화시킨 것으로부터 얻을 수 있으며 이 지르코늄염 수용액으로부터 입자미세구조를 효과적으로 제어하여 산화지르코늄 및 안정화 지르코니아 분말제조가 가능하다. 안정화 지르코니아 분말은 ZrO2와 안정화산화물의 고용을위하여 가열처리를 필요로 하며 일정온도에서 최적상태로 숙성하므로서 2가지 상(phase) 이상의 고용체를 가지게 된다. 안정화 지르코니아 분말은 고용처리온도를 낮추고 효과적으로 생성시키기 위해서는 지르코늄 및 안정화제염을 혼합하고 습식 직접합성하여 저온에서 고용체의 합해진상 영역을 생성시키는 것이다. 이는 지르코니아 원료분말의 미세구조를 제어하므로서 가능하며 이때 화학성분조성과 크기형태가 균일하게 분포된 입자분말을 얻을 수 있다.

• Journal of Aquaculture
• /
• v.7 no.3
• /
• pp.151-158
• /
• 1994

To evaluate the reproductive ability of gynogenetic diploid male. Paralichthys olivaceus. histological analysis of testis. cytological analysis of spermatozoa and fertilization test with normal aggs were studied and the results are as follow; The gonads of gynogenetic diploid male were histologically normal. and many spermatozoa were observed in their testis. Number of spermatozoa from the control and gynogenetic diploid male were $2.58\times10^9$ and $2.42\times10^9$ cells per 1 ml of milt. respectively (P> 0.05). Amount of milt per kg body weight from the gynogenetic diploid male was significantly higher (P< 0.01) than that from the control male (8.3ml). Size and morphology from the two experimental groups were not different (P>0.05). More than $80\%$ of fertilization rates and hatching rates were observed when the eggs from the control were fertilized with the gynogenetic diploid male sperms.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1525-1531
• /
• 2013

Baegilju is a famous traditional Korean wine made over the course of 100 days. The physiological functionalities of Baegilju were evaluated using different tests. The spectrophotometric method was used to determine the total concentration of polyphenolics and flavonoids and DPPH and ABTS radicals. A nitrite scavenging assay was used to evaluate antioxidant activity. The fibrin plate method was used for fibrinolysis and to evaluate angiotensin I converting enzyme (ACE) inhibitory activity; finally, the colorimetric determination method was used to evaluate acetylcholinesterase (AChE) inhibitory activity. The total polyphenolic content of non-sterilized Baegilju and sterilized Baegilju were 391.59 ${\mu}g$ and 401.33 ${\mu}g$ tannic acid equivalents/ml, respectively; and the flavonoids contents were 284.75 ${\mu}g$ and 308.35 ${\mu}g$ quercetin equivalents/ml, respectively. Baegilju exhibited more excellent antioxidant activities (DPPH and ABTS radicals, nitrite scavenging activity) than did Cheongju. In addition, the fibrinolytic activity and AChE inhibitory activity were found to be higher in Baegilju than they were in Cheongju. The ACE inhibitory activity of non-sterilized Baegilju, sterilized Baegilju, and Cheongju were 23.62%, 19.99%, and 38.91%, respectively. Therefore, these results suggest that Baegilju has potential as an antioxidant agent and anti-thrombosis agent.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.111-120
• /
• 1993

Abstract In this study, the Mo-Hf-O ingots containing 0.31-1.14at % Hf and 0.08-1.00at % 0 were prepared by plasma arc melting. The change of microstructure depending on the condition of heat treatmen~ was analysed by optical microscophy, auger electron microscophy, and transmission electron microscophy. Molybdenum powder with the oxygen content of 830ppm was compacted, and then melted. The oxygen content of molybdenum ingots was detected to be 40 -130ppm. As the contents of Hf and 0 increased, the grain size of ingots decreased. When molybdenum igot containing l.14at % Hf and 1.00at % C was heat treated, p-molybdenum carbide in grains was transformed into ${\alpha}$-molybdenum carbide at 130$0^{\circ}C$. Between 140$0^{\circ}C$ and 150$0^{\circ}C$, the precipitation of hafnium carbide was due to the reaction of solute Hf and C, and the hafnium carbide was saturated at grain boundaries at 150$0^{\circ}C$. When the sample was heat treated from 150$0^{\circ}C$ to 170$0^{\circ}C$, Hafnium oxide more stable thermodynamically precipitated both at grain boundaries and in grains after hafnium carbide had been dissolved at grain boundaries.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.969-974
• /
• 1998

The effect of vanadium, which is known to decrease the stacking fault energy of Fe-base alloys, on the microstructure and elevated temperature sliding wear resistance of Fe-20Cr- 1.7C- 1Si alloy was investigated. The maximum amount of vanadium maintaining the austenitic matrix seems to be about 3wt.% in Fe-20Cr- 1.7C-1Si-xV (x = 0, 1, 3, 6. lOwt.%) alloys and the austenitic alloys showed better wear resistance than ferritic alloys. It was considered to be due to the low stacking fault energy and $\gamma->\alpha$ strain-induced phase transformation at rmm temperature. It was shown from elevated temperature sliding tests up to .$225^{\circ}C$ that the addition of vanadium increases the temperature, at which the transition from oxidative wear to adhesive wear occur, and the amount of d formed at $225^{\circ}C$. Thus, it was considered that the addition of vanadium improves the elevated temperature sliding wear resistance of Fe-20Cr- 1.7C - 1Si by reducing the increasing rate of stacking fault energy with temperature and by increasing Ma temperature.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.24-30
• /
• 2002

Label switching technology is currently emerging as a solution for the rapidly growing of Internet traffic demand. Multiprotocol label switching(MPLS) is one of the standards made by the Internet Engineering Task Force(IETE) intended to enhance speed, scalability, and inter-opearability between label switching technologies. In MPLS, utilization of label space is a very important factor of network performance because labels are basic unit in packet switching. We propose a algorithm to effectively use label space by a multiple disconnect timer at the label switching router. Our algorithm is based on multiple utilization of the connection release timer over the MPLS network with multiple domains. In our algorithm, a relatively linger timeout interval is assigned to the traffic with higher class by the aid of the packet classifier. This reduces delay for making a new connection and also reduces the amount of packets which will be routed to the layer 3. Simulation results shows that reduction of required label number in MPLS network and this indicate our algorithm offers better performance than the existing ones in term of utilization of label space.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.603-613
• /
• 1998

The present study was designed in order to observe relationship between the endoplasmic reticulum and the Golgi complex during spermiogenesis of the long-fingered bat (Miniopterus schreibersi fuliginosus). The testes were obtained from adult bats and treated with the prolonged osmification or fixed with ferrocyanide reduced osmiun. In the Golgi phase, The Golgi complex shows an oval shape, and was composed of a cortex and a medullar enclosing acrosome. The Golgi vacuoles with electron-dense granules of crescent shape were fused with each other. The smooth endoplasrnic reticulum was scattered in all the area of the cytoplasm. In the cap phase, The Golgi complex was crescent in shape, and faced to a nucleus. Large and small vesicles were fused with each other, and then fused with a acrosomal vacuole. The rough endoplasmic reticulum was close to the large Golgi vacuole. In the acrosome phase, The Golgi complex was moved to behind of the acrosome face. Small vesicles were fused with an acrosome, and cisternae of the trans-face of Golgi complex was connected with an acrosome in the early acrosome phase. The smooth endoplasmic reticulum was distributed in the cytoplasm. The annulate lamellar was originated from a radial body-annulate lammellae complex. In the maturation phase, The Golgi complex with dilated cistrern appeared in the cytoplasm, and also, annulate lamellar was observed in the cytoplasm. The connection of the annulate lamellar with the cistern of radial body suggests that an annulate lamellar seems to be closely related to radial body. The smooth endoplasmic reticulum was scattered in the cytoplasm in the early Golgi phase, but annulate lamellar-radial body complex which might be a residual and disappearing form of the smooth endoplasmic reticulum appeared in the acrosome phase. The Golgi complex steadily remained in the late maturation phase when the endoplasmic reticulum began to disappear from the cytoplasm: the Golgi complex was still occurred after acrosome formation. The observations obtained in the present study, which was characterized by the presence of the Golgi complex in the late maturation phase, suggests that the Golgi complex may play an important role also even after the acrosome formation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1056-1063
• /
• 2006

Thermal evaporated 10 nm-Ni/l nm-Ir/(or polycrystalline)p-Si(100) and 10 nm-$Ni_{50}Co_{50}$/(or polycrystalline)p-Si(100) films were thermally annealed using rapid thermal annealing fur 40 sec at $300{\sim}1200^{\circ}C$. The annealed bilayer structure developed into Ni(Ir or Co)Si and resulting changes in sheet resistance, microstructure, phase and composition were investigated using a four-point probe, a scanning electron microscopy, a field ion beam, an X-ray diffractometer and an Auger electron spectroscope. The final thickness of Ir- and Co-inserted nickel silicides on single crystal silicon was approximately 20$\sim$40 nm and maintained its sheet resistance below 20 $\Omega$/sq. after the silicidation annealing at $1000^{\circ}C$. The ones on polysilicon had thickness of 20$\sim$55 nm and remained low resistance up to $850^{\circ}C$. A possible reason fur the improved thermal stability of the silicides formed on single crystal silicon substrate is the role of Ir and Co in preventing $NiSi_2$ transformation. Ir and Co also improved thermal stability of silicides formed on polysilicon substrate, but this enhancement was lessened due to the formation of high resistant phases and also a result of silicon mixing during high temperature diffusion. Ir-inserted nickel silicides showed surface roughness below 3 nm, which is appropriate for nano process. In conclusion, the proposed Ir- and Co- inserted nickel silicides may be superior over the conventional nickel monosilicides due to improved thermal stability.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.88-93
• /
• 2001

The thermal behavior and the crystallographic characteristics of an epitaxial $C49-TiSi_2$ island formed in a Si (001) substrate by $N_2$, treatment were investigated by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). It was found from the analyzed results that the epitaxial $C49-TiSi_2$ was thermally stable even at high temperature of $1000^{\circ}C$ therefore did not transform into the C54-stable phase and did not deform morphologically. HRTEM results clearly showed that the epitaxial $TiSi_2$ phase and Si have the orientation relationship of (060)[001]$TiSi_2$//(002)[110]Si, and the lattice strain energy at the interface was mostly relaxed by the formation of misfit dislocations. Furthermore, the mechanism on the formation of the epitaxial $_C49-TiSi2$ in Si and stacking faults lying on the (020) plane of the C49 Phase were discussed through the analysis of the HRTEM image and the atomic modeling.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.624-628
• /
• 1999

Annual plasma levels of vitellogenin and sex steroids were investigated in relation to the gonadal development for understanding the endocrine control of reproduction in spotted flounder, Verasper variegatus. The plasma vitellogenin level was highest, 6.36 mg/ml, in November when vitellogenesis was most active. The level, thereafter, decreased to 3.81 mg/ml in December with the initiation of spawning. On the other hand, estradiol-17 $\beta$ was highest, 2.7 ng/ml, in December, and rapidly decreased in January when spawning occurred. The decreased level of estradiol-17$\beta$, around 0.2 ng/ml, remained unchanged until May. The profiles of plasma testosterone were similar to those of estradiol-17$\beta$ in the fish, The plasma 17 $\alpha$-hydroxyprogesterone level was relatively low throughout the spawning period, but increased slightly with the initiation of ovarian development, In males, the plasma testosterone and 11-ketotestosterone were highest in December when spermiation actively proceeded, but rapidly decreased during the spawning period (January).