• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.149-150
• /
• 2011

본 논문에서는 3-Level Vienna Converter를 간단히 제어 하기 위한 단일 반송파 비교 방식의 전압제어 방법을 제안 한다. 제안된 전압 제어 방식은 Two-Level 전압 변조 방식의 상전압 지령과 단자 전압 지령은 그대로 사용하고, 삼각파 비교부만 비엔나 정류기에 적합하게 단일 반송파를 이용한 방식으로 바꿔 SVPWM을 간단하게 구현할 수 있으며, 기존의 Two-Level 컨버터에서 적용하던 다양한 선형 변조 및 과변조 방식 등 전압제어 알고리듬과 전류제어 알고리듬 등을 Three - Level 컨버터에 쉽게 적용 할 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.138-138
• /
• 2010

이중 주파수를 이용한 고주파 용량성 결합 플라즈마 장치는 반도체 및 디스플레이 생산 공정에서 널리 사용되는 장치 형태이며 일반적으로 이온 플라즈마 주파수보다 높은 주파수의 고주파 전력과 이온 플라즈마 주파수보다 낮은 주파수의 저주파 전력을 인가하여 플라즈마 발생 밀도 및 입사 이온 에너지를 독립적으로 조절할 수 있다. 용량성 결합 플라즈마 장치에서는 전극의 쉬스 임피던스가 비선형적으로 변화함에 따라 전극의 전압, 전류 및 플라즈마 전위는 수많은 고조파를 포함하게 되며, 이중 주파수가 인가된 경우 이러한 고주파와 저주파 신호의 고조파가 상호 변조된 형태로 나타나게 된다. 본 연구에서는 주파수에 따른 이온의 거동 특성 차이를 이용하여 변조된 형태의 Lieberman의 비균일 RF쉬스 모델을 가정한 고주파 쉬스를 단순한 저주파 쉬스로 모사하였다. 단순화된 저주파 쉬스 임피던스를 이용한 회로 모델을 구성하여 100MHz와 2MHz RF전력을 사용하는 용량성 결합 플라즈마 장치에서 측정된 전극 전압, 전류 및 플라즈마 전위 신호의 위상차 및 고조파 발생 특성을 분석하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.74-77
• /
• 2011

본 논문에서는, 지상파 3D HDTV 방송 전송을 위한 VSB(Vestigial Side Band) 변조방식의 심벌 타이밍 및 반송파 동기부 구조를 제안하고 그 성능을 검증해 보았다. 제안하는 동기부의 동작은 다음과 같다. 먼저 반송파 주파수 옵셋에 독립적인 심벌 타이밍 복구 알고리즘으로 타이밍 동기를 이룬다. 그리고 제안하는 프레임 검출 방법으로 프레임의 시작점을 알아내고, 반송파 주파수 옵셋 복구에 필요한 훈련 열을 얻어낸다. 마지막으로, 얻어진 훈련 열을 이용하여 반송파 주파수 옵셋과 반송파 위상 옵셋을 복구한다. 컴퓨터 모의실험 결과, 제안하는 동기부 구조는 이상적으로 동기를 이루었을 때의 BER(bit error rate)성능과 근접한 성능을 나타내었다.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.24-30
• /
• 2008

In this paper, Digital MultiTone(DMT) is an emerging multi-carrier modulation scheme, which has been adopted for VDSL(Very high speed Digital Subscribe Line). A problem of DMT is its sensitivity to frequency offset between the transmitted and received carrier frequencies. This frequency offset introduces inter-carrier interference(ICI) in the DMT symbol. This paper is proposed an ICI cancelation scheme using Kalman Filtering. The performance of the proposed method is compared with conventional methods in terms of bit error rate performance, bandwidth efficiency, and computational complexity. Through simulations, it is shown that for high values of the frequency offset and for higher order modulation schemes, the EKF(Enhanced Kalman Filtering) method perform better than the others.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.809-814
• /
• 2007

In this paper, we proposed new method of a bidirectional WDM-PON transmission using suppressed optical carreir(SOC) and reflective semi-conductor optical amplifier(RSOA) based on WDM-PON. while LiNbO3 mach zehnder modulator(LN-MZM) generates 5GHz modulated SOC for uplink at central office(CO), RSOA at CO modulates the downstream data. At optical network units(ONUs), Another RSOA modulates the SOC light source for uplink at ONU and uplink data are up-converted to the 5 GHz already modulated SOC using LN-MZM.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2006

In this paper, a predistortion linearizer using the in-phase modulator is proposed. The harmonic generator of the proposed predistorter extracts a second harmonic signals. These signals are divided in-phase and quadrature-phase signals, and then amplifying each signals using variable gain amplifier. An in-phase modulator, modulate fundamental signal with second harmonic signals, generates the predistortion intermodulation distortion (IM) signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed intermodulation distortion signals of power amplifier effectively. The proposed linearizer has been implemented to operate in Cellular-band. The test results show that the third order IM is cancelled more than 20dB in case of CW 2-tone signals with ${\Delta}f$=1MHz. Also, it's improved the adjacent channel power ratio (ACPR) more than 7dB for IS-95 CDMA 1FA signals.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.101-110
• /
• 2002

A method to control the inverter output voltage lineally in over modulation mode of the third harmonics injected PWM inverter is proposed. The third harmonics injected PWM has a extended linear region compared with the sine PWM. But it still has a maximum voltage about 90% compared with the six step inverter. Therefore, to control the output voltage linearly in over modulation mode, analyzing the relationship between the modulation index and the peak of the fundamental component of the modified reference voltage, we can settle the problem in over modulation mode without iteration. Then we can increase the maximum fundamental component of the third harmonics injected PWM inverter comparative to six-step inverter continuously in over modulation mode. The simulation results of the inverter-induction motor system shows the validity of this method and experimental results prove it.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.180-186
• /
• 2021

Fluorinated polyimide has excellent light transmittance and a high optical refractive index, and is useful for producing optical-waveguide phase modulators with low optical loss and low electric power consumption. In this work, an optical-waveguide phase modulator is designed and fabricated based on a high-refractive-index fluorinated polyimide, and its characteristics are measured. An efficient protocol for characterizing the loss components of the optical waveguide is proposed, and the propagation loss of the fabricated polyimide optical waveguide is confirmed to be 0.9 dB/cm. The phase modulator requires 9.1 mW of power for phase change of π, and the response time is 290 μs, which is improved by tenfold compared to a previous demonstration of polymeric phase modulators.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1239-1245
• /
• 2005

In this paper, a new predistortion linearizer using second harmonic components feedforwarding is proposed. The harmonic generator of the proposed predistorter that consists of a small signal amplifier extracts second harmonic signals. A vector modulator that modulate fundamental signal with second harmonic signals, generates the inverse third order intermodulation distortion signals and controls amplitude/phase of them with modulation factors. As a result, this linearizer is suppressed IMD3 signals of power amplifier effectively. The test results show that the third order IMD of power amplifier is suppressed more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 5 dB for CDMA(IS-95) 4FA signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.67-73
• /
• 2006

This paper proposes a new predistortion linearizer with controlling intermodulation distortion(IMD) signals. This linearizer achieves independent control of third- and fifth-order intermodulation distortion products using amplitude modulation with even harmonic signals. A vector modulator that modulate fundamental signal with both second- and fourth-order harmonic components generated by harmonic generator circuits, generates the inverse characteristics third-and fifth-order intermodulation signals of power amplifier and controls amplitude and phase of them with each other modulation factors. As a results, this linearizer is suppressed IMD signals of power amplifier effectively. The test results show that the third IMD is cancelled more than 25 dB and the fifth order IMD is cancelled about 18 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 7 dB for IS-95 CDMA signals.