• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.344-352
• /
• 2020

Covertness and performance are very important design goals in the underwater communications. To satisfy both of them, we proposed efficient underwater communication model which combined multiband and direct sequence spread spectrum method in order to improve performance and covertness simultaneously. Turbo coding method with 1/3 coding rates is used for channel coding algorithm, and turbo equalization method which iterately exchange probabilistic information between equalizer and decoder is used for receiver side. After optimal threshold value was set in Rake processing, this paper analyzed the performance by varying the number of chips were 8, 16, 32 and the number of bands were from 1 to 4. Through the simulation results, we confirmed that the performance improvement was obtained by increasing the number of bands and chips. 2~3 dB of performance gain was obtained when the number of chips were increased in same number of bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.554-562
• /
• 2004

It was recommended for all ship engaged in international voyages to carry the Satellite Emergency position Indicating Radio Beacon according to Global Maritime Distress ＆ Safety System but also it is tending to be diffused to require the satellite EPIRB installed in small vessel such as a fishery boat by domestic regulations of each countries. Otherwise the domestic regulation can't evaluate exactly the compatibility with the satellite system and the performance of the equipment itself required by international regulation. And even if it is required the performing of the performance inspection in accordance with international regulation, it is difficult to grasp the characteristics of equipment by a generalized measuring equipment. Hence this study performed the measurement for the matters related with an wave forms, modulation characteristics, frequency and the power, etc through the design and implementation of the test bench capable of ensuring most of test items regulated by international regulation. Through this study, it has been paved the way being capable of preparation of the standard regarding to transmission repetition period, phase variation and frequency stability related with the system compatibility and in conclusion, it is enable to improve the performance of a main distress communication equipment directly connected with the life of a survivor.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.345-350
• /
• 2008

Polymer Impregnated Concrete (PIC) prepared from Ordinary Portland Cement Concrete (OPC) has excellent mechanical properties as well as physico-chemical properties. For the manufacturing of PIC, drying process of basis concrete (precast concrete), impregnation process with evacuation system and ultrasonic vibration system, polymerization process of monomers are essential. Modified microwave reactor using magnetron was used for polymerization of styrene/MMA (1 : 1) impregnated in pore volume of basis concrete. From the experimental results, the degree of polymerization increased up to 30% and more homogeneous PIC was prepared as compared to the conventional thermal method. Also the mechanical strengths increased more than 400% ($800{\sim}1200kg_f/cm^2$) and the resistance for corrosion to acids was improved up to 25%. AIBN and BPO as initiators for polymerization were used at the concentration less than 1%. Optimum conditions for polymerization were obtained at the frequency of microwave of 400 W and 2450 MHz, and optimum reaction temperature was $120^{\circ}C$ at an atmospheric pressure.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.712-719
• /
• 2013

This paper studies the security module for the reliable transmission of the meter reading and the control data between the remote terminals and the upper server-side in smart water grid. The proposed security module was implemented to make it attachable to the remote terminal without security function. In particular, unlike the smart grid of electric field, the low power is considered due to the use of battery power in the smart water grid, and the ARIA-GCM-128 symmetric key method is adopted taking into the account that the damp and constrictive environments by the installed meter location in the underground occur a communication obstacle on building of the large-scale network system. The encryption module of this paper was devised to ensure the safety between the reading data on the terminal and the control data from the upper server, and secure the stability of the remote meter reading system by taking protection against an arbitrary alteration or modification.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.36-44
• /
• 2016

In this paper, an Impulse Radio-Ultra Wide band RF Transceiver for WBAN applications is implemented in $0.18{\mu}m$ CMOS technology. The designed RF transceiver support 3-5GHz UWB low band and employs OOK(On-Off Keying) modulation. The receiver employs non-coherent energy detection architecture to reduce complexity and power consumption. For the rejection of the undesired interferers and improvement of the receiver sensitivity, RF active notch filter is integrated. The VCO based transmitter employs the switch mechanism. As adapt the switch mechanism, power consumption and VCO leakage can be reduced. Also, the spectrum mask is always same at each center frequency. The measured sensitivity of the receiver is -84.1 dBm at 3.5 GHz with 1.579 Mbps. The power consumption of the transmitter and receiver are 0.3nJ/bit and 41 mW respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1646-1653
• /
• 2008

In this paper, we propose multicarrier CDMA system using the concept of the modulation level-controlled system in order to make the system robust to the frequency selectivity and to provide a maximum data rate maintaining an acceptable transmission quality over various channel environments. This system selects higher data rate when the channel experiences the low delay spread and slow fading. On the other hand, when the fading changes very fast and the delay spread is very long, the system selects lower data rate. In both cases, the system controls the number of serial-to-parallel converted streams and the number of fed streams. This system has the fixed number of sub-carriers. So the product of tile number of serial-to-parallel converted streams and the number of fed streams is always kept constant. With the same data fed at different sub-carriers, the frequency diversity is achieved. And a RAKE receiver also is utilized to achieve path (time) diversity.

• Journal of Aerospace System Engineering
• /
• v.13 no.4
• /
• pp.26-36
• /
• 2019

The precise alignment between optical components is required in high-resolution earth observation satellites. However, the misalignment of optical components occurs due to external factors such as severe satellite launch environment and space environment. A satellite optical system with a focus mechanism is required to compensate for the image quality degraded by these misalignments. This study designed, fabricated, aligned precisely, and carried out a performance tests for the image quality of the system. The satellite optical camera performance tests were carried out to check the image quality change by operating the focus mechanism and to analyze the satellite optical system MTF by photographing USAF target using the autocollimator. According to the experimental results, the misalignments can be compensated sufficiently with the focus mechanism. Finally the basic data for re-focusing algorithm of the optical system was obtained through this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1319-1324
• /
• 2020

A smart tag complements various problems caused by the expansion of the use of existing magnet cards. This emerged as a result of the need for alternative means to perform safer and more diverse functions. RFID tags are becoming increasingly ubiquitous sensor networks and Internet of Things technologies as they give everything an ID, enabling automatic recognition of objects and forming a communication network between them. In this paper, a contactless RFID smart tag reader composed of RFID tags and readers using AVR processor was developed. The system has a low frequency band of 13.56MHz and is designed by PWM method of communication velocity 26.48kbps. The developed RFID smart tag board showed a faster response rate than the typical RFID system as a result of the simulation, and the actual experiment also showed an improvement in response rate.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.5
• /
• pp.149-156
• /
• 2009

Korean WiBro becomes international standard to IEEE 802.16e, and We are carrying out a WiBro network business from capital regions. We executed eavesdropping about voices and messenger program and the VoIP which frequently happened in WiBro networks at these papers. We have a lot in common with the Wireshark which is a packet collection and an analyzer, and We execute eavesdropping, and We reproduce eavesdropping data with bases to a SIP, H.263, TCP, UDP protocol through packets. In time of a copy of a packet negative the VoIP which verify time with bases, and was eavesdropped on integrity packet and a X-Lite call record, be matched that a packet is counterfeit forgery did not work, and We demonstrate, and verify integrity. The data which integrity was verified put in a seaming envelope, and we prepare so as it is to a liver of investigator, and execute, and to be able to do use to proof data after seaming in courts in order to utilize as criminal investigation data.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.259-262
• /
• 2022

정보화 시대 스마트폰이 대중화되고 실시간 인터넷 사용이 가능해짐에 따라, 본인을 식별하기 위한 사용자 인증이 필수적으로 요구된다. 대표적인 사용자 인증 기술로는 아이디와 비밀번호를 이용한 비밀번호 인증이 있지만, 키보드로부터 입력받는 이러한 인증 정보는 시각 장애인이나 손 사용이 불편한 사람, 고령층과 같은 사람들이 많은 서비스로부터 요구되는 아이디와 비밀번호를 기억하고 입력하기에는 불편함이 따를 뿐만 아니라, 키로거와 같은 공격에 노출되는 문제점이 존재한다. 이러한 문제점을 해결하기 위하여, 자신의 신체의 특징을 활용하는 생체 인증이 대두되고 있으며, 그중 목소리로 사용자를 인증한다면, 효과적으로 비밀번호 인증의 한계점을 극복할 수 있다. 이러한 화자 인식 기술은 KT의 기가 지니와 같은 음성 인식 기술에서 활용되고 있지만, 목소리는 위조 및 변조가 비교적 쉽기에 지문이나 홍채 등을 활용하는 인증 방식보다 정확도가 낮고 음성 인식 오류 또한 높다는 한계점이 존재한다. 상기 목소리를 활용한 사용자 인증 기술인 화자 인식 기술을 활용하기 위하여, 사용자 목소리를 학습시켰으며, 목소리의 주파수를 추출하는 MFCC 알고리즘을 이용해 테스트 목소리와 정확도를 측정하였다. 그리고 악의적인 공격자가 사용자 목소리를 흉내 내는 경우나 사용자 목소리를 마이크로 녹음하는 등의 방법으로 획득하였을 경우에는 높은 확률로 인증의 우회가 가능한 것을 검증하였다. 이에 따라, 더욱 효과적으로 화자 인식의 정확도를 향상시키기 위하여, 본 논문에서는 목소리에 잡음을 섞는 방법으로 화자를 인식하는 방안을 제안한다. 제안하는 방안은 잡음이 정확도에 매우 민감하게 반영되기 때문에, 기존의 인증 우회 방법을 무력화하고, 더욱 효과적으로 목소리를 활용한 화자 인식 기술을 제공할 것으로 사료된다.