• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.23-30
• /
• 2003

The seismic base isolation design approach has been reviewed and modified to fit the nonlinear static analysis procedure for determination of the performance point of structures in a simpler way, such an adaptation may be possible for the fact that a structural system under development of damage due to earthquake loading keeps softening to result in period shifting toward longer side. The superiority of the proposed method to the state-of-the-practice approach is that the reasonably accurate performance point can be obtained without constructing the so-called acceleration displacement response spectrum required in application of capacity spectrum method. The validity of the proposed approach was verified by comparing the predicted values to the exact ones presented in the literature.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.145-150
• /
• 2005

It is useful to select an appropriate mathematical model to predict landslide. Through observation and analysis of real-time measured time series, a reasonable mathematic model is chosen to do prediction of landslide. Two theoretical models, such as polynomial function and growth model, are suggested for the description and analysis of measured defermation from an active landslides. These models are applied herein to describe the main characteristics of defermation process for two types of landslide, namely polynomial and growth models. The TRS (tensiof rotation and settlement) sensors are applied to adopt two models, and the data analysis of two field (Neurpjae and Buksil) resulted in good coincidence between measured data and models.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.113-119
• /
• 2016

In this study, the method to predict the lateral response by using strain data is presented on the steel moment frame. For this, the reliability of the proposed method by applying the example of five-story frame structure were verified. Using the strain value of columns, it predicted the lateral response of structure. It is assumed that all of four strain sensors for one column set up and the strain responses of both end of the column are utilized. The lateral response of member is calculated by using the slope deflection method. Also, using the acceleration response of the one layer, the stiffness of the rotation spring located in the supporting point is predicted. As a result, it was effective to understand the lateral displacement and acceleration responses and to predict local damage and location.

• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.1-21
• /
• 2002

Recently, the rapid industrialization and urbanization of the country due to a high economic growth, require optimization, usage and the expansion of underground space. Therefore the consturction of large and deep basements takes place in braced excavated area where their earth retaining structures cause many problems such as settlement and damages of nearby buildings and underground utilities. this study deals with the influence distance of settlement and the amount for settlement based on the measurement which were obtained at five excavation construction sites. Maximum ground surface settlement, (0.28∼0.3)(%)H utilizing depth, is similar to the measurement and the value by Clough's method. It was found that the settlement and the influence distance of settlement calculated by Clough's method were rational.

• Composites Research
• /
• v.13 no.3
• /
• pp.48-57
• /
• 2000

Fracture analysis of coating cracking on a substrate system described in a companion paper was applied and verified by four-point bending tests. The multiple cracking of coating was predicted using a fracture mechanics approach. The strain energy release rate (G) due to the formation of a new crack in a coating was obtained. A crack density vs. strain data of metallic and polymeric substrate was used to get the in-situ fracture toughness of coating with respect to various baking time and temperature. The $G_c$ was decreased as the baking temperature and time was increased. This paper gave insight about usefulness of four-point bending test for fracture toughness evaluation of coating and it gave a new method for in-situ coating toughness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.76-81
• /
• 2011

UV imprinting process can manufacture high-functional optical components with low cost. If hard polymers can be used as transparent molds at this process, the cost will be much lower. However, there are limited researches to predict the machinability and the burr of hard polymers. Therefore, a new method to predict them by analyzing load-depth curves which can be obtained by the instrumented indentation test was developed in this study. The load-depth curve contains elastic deformation and plastic deformation simultaneously. The ratio of the plastic deformation over the sum of the two deformation is proportional to the ductility of materials which is one of the parameters of the machinability and the burr. The instrumented indentation tests were performed on the transparent molds of the hard polymers and the values of ratio were calculated. The machinability and the burr of three kinds of hard polymers were predicted by the ratio, and the prediction was in agreement with the experimental results from the machined surfaces of the three kinds of hard polymers.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.44-44
• /
• 2011

저수지와 같은 갇혀진 수체는 상류에서 유입되는 오염물질 뿐만 아니라 성층현상에 의해서도 오염될 수 있다. 안정된 성층은 혐기성 조건을 제공하여 바닥에서의 과도한 조류성장을 유발하고 연직순환흐름을 방해한다. 갇혀진 수체에서의 연직순환은 환경적인 문제를 감소시킬 수 있도록 중요한 역할을 한다. 갇혀진 수체에서의 연직순환은 이러한 오염을 줄이는데 중요한 역할을 하는데, 연직순환을 일으키는 인자로는 빛의 입사, 바람, 물의 온도 및 열의 확산 등이 있으며, 그중에서도 가장 중요한 것은 바람의 영향이다. 그러므로 성층화된 흐름에서 바람에 의해 발생하는 연직순환에 대한 수치모형을 개발하고 적용하는 것이 필요하다. 본 연구에서는 수온성층흐름에서의 순환흐름을 해석하기 위하여 유속성분을 계산하고 자유수면 변위와 온도, 염도등과 같은 스칼라양의 해석을 위해 다음과 같은 3단계의 방법을 이용하였다. 첫 번째 단계(정수압 계산단계)에서는 운동량 방정식의 경사항을 음해적으로 해석하고, 두 번째 단계(자유수면 보정단계)에서는 자유수면의 변화를 계산하고 수평방향 유속성분을 계산한다. 예측-수정자 방법(predictor-corrector step method)을 이용하여 자유수면변위와 유속을 구하였다. 마지막으로 세 번째 단계(이송-확산단계)에서는 이송-확산 방정식을 이용하여 스칼라양을 계산하였다. 본 연구에서 제시한 모형의 정확도를 검증하기 위하여 정사각형수조에서 진동하는 자유수면의 해석해와 비교하였고, 성층화된 흐름에서 발생하는 연직순환에 대하여 수치모의를 실시하였다. 그 결과, 본 연구에서 개발된 수치모형이 흐름 내부의 현상을 잘 묘사함을 알 수 있었다.

• Journal of the Korean Institute of Gas
• /
• v.10 no.1 s.30
• /
• pp.56-60
• /
• 2006

The connection part (corbel) between bottom slab and side wall in inground LNG storage tank has hinge conditions partly fixed by using anchor bars to reduce stress concentration. The corbel deforms in both radial and vertical directions under load conditions of the LNG tank such as LNG temperature, hydraulic pressure, etc. Membrane is an important part from the viewpoint of design because the deformation of the corbel is transformed directly to the membrane and superposed with other deformations. Behavior of the corbel has been investigated through various sensors to measure temperature, load and displacement. And the test data have been compared with finite element results analysis to propose a more reasonable design of LNG storage tank.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.9-20
• /
• 2002

The purpose of this research is to develop computational procedures for studying nonlinear soil-structure interaction Problems. In orders to study soil-structure interaction behavior, the finite element analysis for the strip footing subjected to both vortical and lateral loads, and foundation layer reinforced with sheet pile are considered, interface elements are used between the footing and the soil to model the interaction behavior The main analyzed results are as follows; 1. For the prediction of settlement and lateral displacement, the result due to interface element was evaluated larger then without interface element. 2. For the determination of ultimate bearing capacity, the value using interface element appeared smaller by 12%, which was safe. 3. The horizontal and vertical displacement of strip footing affected by the presence of interface element.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.705-712
• /
• 2004

To investigate the mechanical behavior of pin cups created from steel pipes embedded in concrete, test blocks were made and load tests were conducted. The pin was inserted in the pin cup at various depths and was loaded in a lateral direction at a constant displacement speed. A formula, which took into consideration the deformation and failure shapes of the pin cups, observed during and after the tests, was used to estimate its mechanical behavior. The test values were determined to be relevant to the formula and were distributed within a reasonably narrow range. The mean and the 95% survival probability value of maximum resistance were determined by factoring the formula at 1.01 and 0.92, respectively.