1 |
Choi H. J. et al. "Analysis of Machining Characteristics for Micro Pattern of Transparent Polymer Panel using Diamond Cutting Tool and its Application", Proc. of the KSMPE Spring Conf., pp. 45-46, 2010.
|
2 |
서남섭, "절삭가공학", 동명사 pp. 160, 2010.
|
3 |
Dieter, G. E., "Mechanical Metallurgy", McGraw Hill, pp. 290, 1988.
|
4 |
Oliver W. C., Pharr G. M. "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments", J. Mater. Res., Vol. 7, pp. 1564-1583, 1992.
DOI
|
5 |
Jeon E. c., Kim J. Y., Baik M. K., Kim S. H., Park J. S. Kwon D. "Optimum Definition of True Strain Beneath a Spherical Indenter for Deriving Indentation Flow Curves", Mat. Sci. and Eng. A, Vol. 419, pp. 196-201, 2006.
DOI
ScienceOn
|
6 |
Filiz S., Conley C. M., Wasserman M. B., Ozdoanlar O. B. "An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills", Machine Tools and Manufacture, Vol. 47, pp. 1088-1100, 2007.
DOI
ScienceOn
|
7 |
Yuan Z. J., Zhou M., Dong S. "Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining", J. Mater. Proc. Tech., Vol. 62, pp. 327-330, 1996.
DOI
ScienceOn
|
8 |
Boschetto A., Quadrini F. Squeo E. A. "Extracting local mechanical properties of steel bars by means of instrumented flat indentation", Measurement, Vol. 44, pp. 129-138, 2011.
DOI
ScienceOn
|
9 |
KS B 0950, "금속 재료의 계장화 압입 시험 - 압입인장 물성 평가", 한국표준협회, 2008.
|
10 |
Sakai M. "Energy Principle of the Indentation-induced Inelastic Surface Deformation and Hardness of Brittle Materials," Acta Metallurgica et Materialia, Vol. 41, pp. 1751-1758, 1993.
DOI
ScienceOn
|