• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.503-514
• /
• 2006

FBG sensors are capable of measuring the strain of structures easily and more durably than electric resistance gauges. Thus, many researches are dedicated to the application for the response monitoring or non-destructive evaluation of structures using FBG sensors. Additionally, the measured strains at the top and bottom of a cross-section can be transformed into the curvature of the section, which can be used to calculate its vertical displacement. Hence, this study aims to measure the dynamic strain signals of a steel section simply supported beam and to estimate the dynamic displacement from the strain signals, after which the estimated displacement is com pared with the measured displacement. The dynamic characteristics (natural frequency, damping ratio and mode shape) of the beam are predicted from both the estimated and measured displacement signals, and from the strain time history of the FBG sensors. The predicted properties are compared with those of an analytical model of the beam. The estimated displacement. However, the predicted dynamic properties from both the estimated displacements and the measured strains are well-correlated with those from the measured displacement. It is therefore appreciated that the estimation of the dynamic properties of FBG sensor signals is reasonable. Especially, the strain signal of the FBG sensor was amplified at a higher-frequency region in comparison with the displacement estimation with higher-mode properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.534-544
• /
• 2019

Because the pile-bent of IPM Bridge is projected from the soil surface, excessive displacement of abutment can be induced. According to design guide of IPM Bridge, the shape of the bridges used in this study was applied to the maximum applicable 120.0m span, 30-degree for skew angle, and 10.0m for the protruded pile-bent height. The maximum displacement by the maximum span application condition of the IPM Bridge was calculated using this bridge model, and the safety of a horizontal displacement of the IPM Bridge was investigated based on the allowable displacement presented by Bozozuk. The maximum horizontal displacement of the IPM Bridge was calculated to be larger in the winter shrinkage condition than in the summer expansion condition, the horizontal displacements were more affected by the length of a bridge than by the skew angle. And the vertical displacement was not affected by the skew angle and length. As the span increases, the horizontal displacement increases significantly, the horizontal displacement at 120.0m span length was found to exceed the allowable displacement proposed by Bozozuk. However, the moment generated in the pile-bent did not exceed the plastic moment.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.3-5
• /
• 2002

최근 기계적으로 빔을 움직일 수 있는 마이크로 스트립 패치 배열 안테나가 MEMS 기술을 이용해서 제작되고 시험되었다. 본 논문에서는, 제작된 안테나의 적용 예로써 위상변위기를 사용하지 않는 새로운 어레이 안테나의 방사패턴 합성방법을 제안하고, 제안된 방법을 원하는 빔 형상합성에 적용하였다. 방사패턴 형상의 최적화에는 Restricted Competition Selection(RCS)를 이용한 유전 알고리즘을 이용하였다. 또한 이러한 방식의 접근은 EMC 표준에 대처하기 위한 배열 안테나의 설계 시에도 적용이 가능하며, 제안된 방법을 이용하여 특정한 빔 형상들에 대한 합성이 가능하다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1145-1147
• /
• 1999

평판전극배열을 이용한 회전구동형 마이크로 액츄에이터의 구동력을 증대시키기 위하여 전극의 형상을 최적화 하였다. 기존 평판구동형 마이크로 액츄에이터의 형상을 변형시켜 반경에 무관하게 전극의 수직간격을 최소간격으로 일정하게 유지함으로서 구동력을 배가시키는 효과를 발생시켰다. 이러한 구동력의 증가는 결국 요구되는 변위를 만족시키면서 고유진동수를 증가시켜 마이크로액츄에이터의 구동성능을 향상시킬 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.172-172
• /
• 2004

형상기억합금 작동기는 스마트 작동기의 대표주자로서 부피 대비 발생력이 다른 어느 재료보다 우수하고, 모터와 같은 작동소음이 발생하지 않으며, 온도변화에 의한 간단한 작동원리로 근래에 많은 연구자들의 관심을 받아왔다 그러나, 온도변화 대 변위 곡선을 살펴보게 되면 이력곡선, 포화현상 등의 강한 비선형성을 내제하고 있고, 대류조건에 따른 온도외란에 민감하다. 이로 말미암아 정밀한 위치제어에 상당한 문제를 수반하고 있으며, 기존의 PID제어기나, 모델기저 제어기를 사용하게 될 경우 정상 상태오차와 한계싸이클 등의 현상이 나타나는 것으로 문헌에 보고되고 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1530-1535
• /
• 1992

An optical method of phase shifting interferometry is presented for the 3-dimensional profile measurement of mirror surfaces with nanometer resolution. A series of optical interferometric fringes are generated by comparing the surface to be measured with a reference flat. The fringes are captured by a CCD camera and then analyzed to obtain actual surface profile. Detailed principles are described along with necessary image processing algorithms. finally, several measurement examples are discussed which were performed on lapped surfaces, hard discs, and semiconductor wafers.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.151-160
• /
• 1999

The settlement limit concept is generally adopted as design criteria of rock-socketed pile foundations, therefore, the load-displacement$(\sigma-\sigma)$ behavior of the rock-socketed piles should be well understood at the design stage, which, however, is hard to achieve due to its complexity. To help this out, field pile load tests are executed on cast-in-situ concrete piles, first, to figure out the $\sigma$-$\delta$ behavior of rock-socketed piles. Next, the $\sigma-\sigma$ relations of the piles are simulated numerically using commercial package program(ELAC) varying a couple of input data which are sensitive in shaping the $\sigma$-$\delta$ curves. Finally, the relation between the best input data for the numerical simulations and the geotechnical field data are cultivated to generalize the numerical simulation procedures, which enables geotechnical engineers to predict the $\sigma$-$\delta$ behavior at the design stage, if appropriate geotechnical field data are provided.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2016

The information about the deformations of high-aspect-ratio wings is needed for the real-time monitoring of structural responses. Wing deformation in flight can be predicted by using relationship between the curvatures and the strains on the wing skin. It is also necessary to consider geometric nonlinearity when the large deformation of wing is occurred. The strain distribution on fixed-end is complex in the chordwise direction because of the geometric shape of fixed-wings on fuselages. Hence, the wing displacement can be diversely predicted by the location of the strain sensing lines in the chordwise direction. We conducted a study about prediction method of displacements regardless of the chordwise strain sensing locations. To correct spanwise strains, the ratio of spanwise strain to chordwise strain, Poisson's ratio, and the ratio of the plate strain to the beam strain were used. The predicted displacements using the strain correction were consistent with those calculated by the FEA and verified through the bending testing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.161-167
• /
• 2016

In this study, the effect of wall curvature and post-tension force on impact resistance is evaluated by numerical analysis method. A total of twelve cases with two parameters such as wall shape of flat and curved, and consideration of post-tensioning force were included in this study. A 3D detailed finite element model of commercial passenger plane engine is utilized as projectile. The depths of penetration and central displacement calculated from the numerical simulations were compared and analysed. As the results of the numerical simulations of this study, penetration depth was reduced approximately 60~80% due to the application of post-tension force, but the decrease of maximum central displacement was not remarkable. Also, the effect of curvature was relatively insignificant.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2287-2297
• /
• 1992

The Formulation of a new Hermite straight beam element to eliminate the shear locking is presented. All the kinematic variables in Timoshenko beam are reinterpreted by the consideration of equilibrium equations together. It shows that when the modified transverse displacement field is used the Timoshenko beam looks apparently the same as the Euler beam. The element is formulated for the modified transverse displacement field to have the same interpolation scheme as that in the Hermite element. Transformation Matrix which relates a modified nodal vector with nonmodified one is also introduced to deal with general boundary conditions. Several examples are demonstrated and discussed for the purpose of verification of the concepts employed. The solutions obtained reveal that the element describes of the beam quite correctly, showing no locking and that it is also applicable to the analysis of both thin and thick beams.