• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.120-130
• /
• 2019

In this study, based on the correlation between traffic volume data and vertical displacement data developed in previous research using the bridge maintenance big data of 2006, the vertical displacement estimation model using the traffic volume data of Gwangan Bridge for 10 years A comparison of the performance of the developed model with the current applicability is presented. The present applicability of the developed model is analyzed that the estimated displacement is similar to the actual displacement and that the displacement estimation performance of the model based on the structured regression analysis and the principal component analysis is not significantly different from each other. In conclusion, the vertical displacement estimation model using the traffic volume data developed by this study can be effectively used for the analysis of the behavior according to the traffic load of Gwangan Bridge.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.428-434
• /
• 2007

Displacement of tunnel face is important issues for the evaluation of tunnel safety. In this study, conventional convergence and displacement data measured from horizontal inclinometer were analyzed to investigate the trend and characteristics of tunnel deformation during construction. Trend of measured displacement agreed with general understanding of tunnel deformation prior to excavation. It shows that displacement measured from horizontal inclinometer can be used to preestimate the total deformation of tunnel.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.369-371
• /
• 2017

지반침하는 열차 탈선과 같은 대형재난을 야기할 수 있다. 그러므로 지반침하를 사전에 파악하기 위한 다양한 연구가 진행 중이다. 최근 광범위한 지역의 지표변위를 경제적으로 분석할 수 있는 InSAR(nterferometric SAR)기법을 이용한 연구가 활발히 진행되고 있다. InSAR 기법 중 PS-InSAR(Permanent Scatterer Interferometric SAR)기법이란 SAR영상에서 긴밀도가 높은 고정산란체(PS:Permanent scatterer)를 이용하여 지반침하를 분석하는 기법으로 다른 InSAR 기법에 비해 대기에 의해 발생하는 오차가 적으며, 보다 정확한 지표변위량을 도출할 수 있다. 또한 장기간에 걸친 시계열적 지표 변위 분석에 용이하다. 본 논문에서는 독일의 Terra SAR-X 위성 영상을 이용하여, 광주광산구의 지표변위를 분석하였다. 연구지역인 광주 광산구는 대표적인 연약지반인 평야지역에 위치해 있으며, 실제로 2015년 한국시설안전공단의 발표에 의하면 6곳의 지반탐사 필요 의심지역이 존재할 만큼 지반이 불안정한 지역이다. 연구 결과 광주 광산구 8mm/year로 지반이 침하되고 있음을 알 수 있었다. 이에 광주 광산구 일대의 지반침하 대비를 위해 다양한 노력들이 필요할 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.472-476
• /
• 2012

부정류 해석프로그램을 이용하여 각 절점에서 갑작스런 유량의 변화가 일어났다고 가정하여 부정류 해석을 수행하였다. 각 절점에서 소요유량(demand)이 추가로 발생할 경우에 대해서 부정류 해석을 수행하였다. 추가 소요유량이 발생하였다는 것은 그 절점에서의 누수량으로 간주할 수 있으므로 실제 일어날 수 있는 누수에 대한 민감도 분석을 하여 센서의 설치지점을 선정한다면 보다 더 정확한 모니터링 지점선정이 될 것으로 판단된다. 다음과 같은 두 가지 방법을 통하여 모니터링 최적지점 선정방법을 비교하였다. 첫 번째는 한 절점에서 갑작스런 소요유량의 변화가 발생하면 그로인해 부정류가 발생한다. 이때 각 절점에서의 압력변위와 유량변화가 발생한 절점의 압력비를 합하고 절점의 수로 평균하여 민감도 분석을 수행한다. 특정 절점에서 유량변화로 발생한 압력의 변화가 다른 절점에 얼마나 영향을 미치는지에 대한 기여도를 부정류 해석결과를 이용하여 정량적으로 산정하는 방법이다. 특정 절점에서 유량의 변화가 생겼으므로 부정류해석 결과는 누수가 없을 때 최초 계산하였던 각 절점에서의 압력이 크게 유동하게 된다. 이때의 최고치와 최저치의 차는 압력변위이고 최초압력과의 비를 합산하고 절점의 수로 평균한 값을 비교하였다. 이렇게 계산된 값이 가장 큰 절점이 모니터링 지점으로 우선 선정된다. 두 번째 방법은 유량변화로 발생한 절점의 압력변위와 그 절점의 최초압력의 비를 산정하는 방법이며 부정류해석결과를 이용하였다. 한 절점에서 유량을 변화시키고 부정류로 인해 발생하는 압력변위와 최초압력의 비를 합산하고 절점수로 평균하여 민감도 분석을 수행한 것이다. 어느 절점의 압력변위와 최초압력의 비를 정량적으로 산정하여 민감도를 분석하고 비교하였다.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.137-149
• /
• 2023

In order to intuitively grasp the earth pressure direction acting on the structure and displacement state, displacement data in the horizontal and vertical directions were processed using the sigmoid function. A displacement coordinate system was set up for each axis. The system can intuitively check the current displacement and assess the management stage of each point. A displacement path can be compiled from continuously recorded points, allowing trends in the displacement's history and stress direction to be known. Analysis of data measured for excavated ground, found that displacement occurred in the direction of destressing at all points, and that the points' management state steady. Similar behavior trends were found among measurement points with high spatial correlation, whereas differing behavior trends occurred among measurement points with low spatial correlation. If the correlation analysis of the precursor and behavior area is performed using the continuously distributed surface settlement data and displacement coordinate system, it will be possible to predict the failure time and area.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.661-664
• /
• 2001

본 논문에서는 영상을 특성에 따라 국부 영역으로 분류하고 변위 공간(disparity space)상에서의 특징을 분석하여 각각의 영역에 적합한 윈도우의 크기를 정하는 새로운 스테레오 정합 기법을 제안한다. 일반적으로 텍스쳐(texture)가 적은 영역이나 텍스쳐가 반복되는 영역, 그리고 깊이의 불연속선상에서는 고정된 크기의 윈도우를 사용하는 영역 기반 스테레오 기법은 잘 동작하지 않는다. 본 논문에서는 이러한 영역들의 변위 공간상에서의 정합 값 분포를 분석하여 스테레오 정합에 이용한다. 실험은 변위의 참값이 알려진 영상에 대해서 수행되었으며 기존의 방법에 비해 짧은 수행 시간 및 정확한 정합 결과를 보여 준다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.61-70
• /
• 2008

In this research, load-transfer-function method was selected, because that is widely used in geotechnical engineering among the analysis methods to verify the behavior of load-lateral displacement. Lateral loading test of field scale was conducted, this measured data was analyzed. From the analysis, the model of load-lateral displacement was suggested. The test results were studied and compared to the commercial programs, 'LPILE', which contain the load transfer functions proposed before. By analysis of measure data of load-lateral displacement that expressed to several functions, $y=ae^{bx}$ model was the simplest and applicable to the field. In that case a value converged about 1.3, b value had a tendency to converge about 0.02. From the comparison analysis between measured data and load transfer function by 'LPILE', it is examined that if the lateral load is small, calculated displacements of them show a similar value compared to measured values. Furthermore, the bigger lateral loads, the bigger calculated values compared to the measured data. If the results are compared by Matlock-Reese method and Matlock-API method, Matlock-Reese method shows result of safe side because lateral displacement is calculated greatly relatively.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.45-52
• /
• 2014

The tunnel construction is increasing in order to secure a good driving performance of the car and train. A cases of tunnel collapse and the tunnel excessive displacement are increasing with the increase in tunnel construction. In terms of empirical construction methods using the strength characteristics of soil, it is important for tunnel construction to analyze causes of collapse and displacement. In the paper, it was analyzed the causes of collapse and excessive displacement of tunnel in the fractured ground condition. The results of analysis is that the increase of rainfall and lasting increase of displacement and large scale fractured ground are interconnected.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.233-243
• /
• 2008

A tunnel behavior predicted in the investigation and design stage is often different from its actual behavior due to mainly the complexity of ground conditions. In a tunnel construction, therefore, it is necessary to ensure the stability of the tunnel by predicting the behaviors of the ground and the supports through observations and measurements, and modifying immediately excavation and reinforcing methods when necessary. To do so, it is important to be able to predict the final tunnel behavior based on the initial tunnel behavior as early as possible. In this study, the correlations were obtained between the initial and the final convergence by analyzing statistically the convergence measurement data, collected from two domestic road tunnels under construction using NATM. In order to estimate the unknown displacements, occurred during the period between the excavation and the first measurement, two methods were used - one is the method by means of regression analysis using a modified exponential function and the other the method by a simple linear regression analysis using the data measured within the distance from tunnel face equal to the tunnel diameter (D). Finally, the relationships were obtained between the initial and final convergence, including the non-measured displacements estimated from the two different methods, by performing linear regression analyses. The regression analysis results showed that there are clear linear relationships between the initial and final convegence and the difference between the two linear regression equations was not that large for when using the exponential function and the simple linear function to estimate the non-measured displacements.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2011

Soil nailing method was often designed by the slope stability analysis based on limit equilibrium. However, in the case of shorten length of nails, although the calculated factor of safety is within the design factor of safety, the horizontal displacement of soil nailed walls occurred above the allowable limit. In this study, relationship between the load and factor of safety, and relationship between the load and displacement ratio based on the test results were analysed. From the analysed results, the relationship between factor of safety and displacement ratio was estimated. For the mobilized horizontal displacement of the walls within the serviceability limit corresponding to the displacement of less than 0.3% displacement ratio, the calculated factor of safety by limit equilibrium analysis had to satisfy above 1.35. Also, although the minimum factor of safety is estimated above 1.35, the maximum horizontal displacement is often mobilized above 0.3% of excavation height. Therefore, it is necessary to perform the numerical analysis of soil nailed walls in the case of low shear strength or high excavation.