• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1195-1198
• /
• 2003

Micro former has been known as a useful tool for machining micro parts. It makes micro holes automatically with punches, a hole-shape die and material by rotation of crank shaft synchronously. Micro displacement in micro forming affects on the performance of machining because micro forming size is similar with its mechanical displacement. Therefore, the measurement of this micro displacement is essential to be guaranteed to obtain high forming precision in the whole machine as well as its devices. This paper addresses the development of a laser interferometer to measure micro displacement for a micro former. The laser interferometer is able to measure micro displacement during a few micro seconds with non-contact. For the experiment, a laser probe is installed on the optical table with optical devices and a micro displacement generating device. The velocity decoding board is also added to calculate doppler shift frequency directly. Finally simple experiments are conducted to confirm its functional operation.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.379-385
• /
• 1994

The sensitivity vector which depends on geometry of object illumination angles and distances of ESPI was analyzed. And the sensitivities of in-plane and out-of-plane displacements have been investigated. From these results, we have the conclusion that it is useful to use the diverging beam for object illumination. With diverging object illumination, only little errors are occurred when we approximate the sensitivity vector to constant all over the object surface.urface.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.144-153
• /
• 1997

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor because of little friction, no lubrication, no noise and so on. The magnetic levitation system need the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of gap sensors brings out the increase of the number of troublesome, and the decrease of the control performance because of the dislocation between the measurement point and the control point. This paper presents the design of the gap estimation circuit for the sensorless method proposed by authors in the magnetic levitation system. We made the gap estimation circuit which was composed of both the superposition circuit and the measuring circuit. And we investigated the validity of the usefulness of the proposed sensorless method in the magnetic levitation system through results of actual experiment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.36-43
• /
• 2003

The analytic solution of radial displacements of thin cylindrical pressure vessel with carbon fiber T700/Epoxy orthotropic composites was obtained using equilibrium equations of the orthogonal curvilinear coordinate system. The governing equations with the simplified strain versus displacement relation of 3-dimensional curvilinear coordinate system were derived from the variational principle and the virtual work principle. Some theoretical analyses were presented and compared with the results of hydraulic tests for the pressure vessels with some various thicknesses. The results of the theoretical analysis and the hydraulic test were reasonably matched.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.35-35
• /
• 2002

나노미터 표준을 확립하기 위하여 일체식 엑스선 간섭계에 광간섭계를 결합시킨 복합간섭계를 구성하였다. 복합간섭계는 광간섭계의 Zero crossing 지점부터 표준시편이 올려진 미소이동대의 이동거리를 변화된 위상값으로 읽고 그 변화량을 고분해능 변위 측정기인 엑스선 간섭계로 읽어들이는 구조로 구성된다. 본 연구에서는 미소이동대의 위치 변화와 관련된 광간섭계의 위상 안정도, 엑스선 간섭계 및 미소이동대의 위치 안정도 등이 나노미터 영역의 길이 측정에 매우 중요한 요인이 되므로, 미소이동대의 위치 변화시 정지상태에서의 위상 잠김 (phase locking) 안정도를 측정하였다. 마이켈슨 레이저간섭계의 한쪽 팔을 고정시키고 다른 한 팔은 미소이동대 위에 반사거울을 설치하여 미소이동대의 움직임을 측정하였다. 보다 안정된 위상잠김 상태를 확보하기 위하여 PID feedback loop controller를 사용하였다. 측정 결과 위상 변동폭이 0.022 degree 이하의 높은 위상잠김 안정도를 확보하였으며, 이를 길이단위로 환산하면 정지상태에서 약 0.02 nm 이하의 위치 안정도를 나타낸다.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.49-58
• /
• 2012

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.102-103
• /
• 1994

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2015

Wind power systems have gained much attention due to the relatively high reliability, good infrastructures and cost competitiveness to the fossil fuels. Advances have been made to increase the power efficiency of wind turbines while less attention has been focused on structural integrity assessment of structural sub-systems such as towers and foundations. Among many parameters for integrity assessment, the most perceptive parameter may be the induced horizontal displacement at the hub height although it is very difficult to measure particularly in large-scale and high-rise wind turbine structures. This study proposes an indirect displacement estimation scheme based on the combined use of inclinometers and accelerometers for more convenient and cost-effective measurements. To this end, (1) the formulation for data fusion of inclination and acceleration responses was presented and (2) the proposed method was numerically validated on an NREL 5 MW wind turbine model. The numerical analysis was carried out to investigate the performance of the propose method according to the number of sensors, the resolution and the available sampling rate of the inclinometers to be used.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.33-41
• /
• 2011

In case of building up port facilities on soft ground, unsymmetrical surcharge of embankment, which make the excess pore water pressure to increase, causes to occur lateral displacement due to plasticity of soil. A study on lateral displacement and settlement of the caisson, which is installed on improved ground, was accomplished. The field measurement data and calculated values obtained from FEM program of Plaxis were compared and analyzed. For numerical analysis, the properties of soils, constructions stage and time were considered. Lateral displacement was measured at the point of inclinometers installed in front of caisson. Settlement was measured at the center of extra embankment behind of caisson. Comparison of measured and calculated for lateral displacement showed that the calculated value was greater than the measured, and increasing trend was different. The calculated value showed step increasing as step extra embankment applied, whereas the measured gradually was increased. For settlement of embankment, the amount of both measured and calculated were similar, but the trend was different like that of lateral movement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.219-227
• /
• 2016

In this study, we have proposed a method of monitoring of bridges under construction in view of the long-term behavior of the prestress concrete bridge of which the Free Cantilever Method is applied. As a method to confirm the ability of the long-term behavior of the concrete box girder, temperature sensors and strain gauges were installed, and the measured data was used to calculate creep coefficient. Moreover, we have measured the stress of the concrete box girder during construction which was applied with creep coefficient and compared with the changes in temperature to analyze the vertical displacement along the segment. In conclusion, monitoring of the FCM bridge during construction in consideration of the long-term behavior can be analyzed efficiently by suing temperature and displacement data without the use of laser displacement meter or laser delfectometer.