• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.385-387
• /
• 2003

전력계통의 증가에 따라 일부 계통에서 지락고장 전류가 2010년이후 차단기 정격전류인 40[kA]를 초과할 것으로 예상된다. 이에 대한 대책으로 345kV 변압기의 중성점의 부동(Floating) 운전을 위하여 PSS/E를 이용하여 실제의 발변전소의 모델을 설정하고 EMTP를 이용하여 지락고장 발생시 건전상의 전위상승, 중성점 전위상승, 부동운전 가능 대수, 변압기 중정점 NGR 설치 효과 및 적정 임피던스 산출, 변압기 중성점 피뢰기 설치 효과 및 적정 정격 산출등을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.277-284
• /
• 2024

This study proposes a method to predict noise reduction based on noise-reduction measures, using harmonic response analysis, for transformer design. The dynamic elastic coefficients of the components comprising the actual transformer were determined by manufacturing the materials of the transformer components into simple-shaped specimens, followed by a comparison of the modes between the experiments and the analyses. A finite element model of the transformer was implemented, and harmonic response analysis was performed by deriving the exciting force of the transformer. Subsequently, the theoretical sound power level of the transformer was derived from the results of the harmonic response analysis. Finally, noise reduction measures were established, and the noise reduction amounts were compared between the experiments and the analyses, before and after applying the measures. Through the comparison and analyses of the noise reduction measures, it was confirmed that the trends in the experiments and analyses matched.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.180-191
• /
• 2003

In this paper, the modelings of PSPICE of the piezoelectric transformer and CCFL drive circuit using an electrical equivalent circuit is proposed. In the CCFL drive circuit modeling the model parameters of the CCFL were derived using the method of least squares because push-pull inverter and loads such as CCFL were also modeled using PSPICE. It is considered that the simulation techniques can be used in the piezoelectric devices such as piezoelectric transformer.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.279-281
• /
• 2007

본 논문에서는 계층적 SVM을 이용한 전력용 변압기의 고장진단 기법을 제안한다. 제안된 기법은 전처리 과정, 정상/고장판별 부, 고장원인판별부, 열화추이분석부로 구성된다. 제안한 고장진단과정을 보면, 전처리부에서는 DGA에 의해 얻어진 가스 데이터의 특징벡터를 산출한다. 그 다음단계로 정상/고장 판별부에서는 얻어진 특징벡터를 이용하여 SVM에 의해 정상/고장 여부를 진단한다. 고장원인 판별부에서는 진단하고자 하는 변압기가 고장으로 판정이 난 경우에 다중-클래스 SVM에 의해 고장원인을 판정한다. 또한 정상/고장판별에서 정상이라 판정할 지라도 열화추이분석부에서 FCM에 의해 구축된 고장모델과 정상데이터간의 거리척도를 이용하여 고장추이론 분서한다. 제안된 방법의 유용성을 보이기 위한 실험결과에서 기존의 방법들에 비해서 향상된 진단결과를 보임을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.3-6
• /
• 2009

변압기 무선부하감시 시스템에서 30분 간격으로 계측된 부하 데이터와 GIS-AMR 데이터웨어하우스로부터 변압기 속성 및 공간적 특징을 추출하여 정확한 변압기의 부하 패턴을 예측하기 위한 시공간 패턴 마이닝 기법을 적용하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.85-91
• /
• 2009

This paper proposes a simulation method of the internal winding fault to calculate the short-circuit current, electromagnetic force and vibration mode in a distribution power transformer by using FEM program(FLUX2D) and analytic algorithm. A usage of the Transfer matrix method is also presented for the vibration mode analysis of the cable-type winding of power transformer. The equations of the winding are approximated by the series expansions of the distributed mass mode and Timoshenko's beam theory. The simulation examples are provided for the cable type winding of the transformer(22.9[kV]/220[V], 1,000[kVA]) to verify the method. The proposed Transfer Matrix Method is also verified by the ANSYS program for the vibration mode of the transformer winding. The method presented may serve as one of the useful tools in the electromagnetic force and vibration analysis of the transformer winding under the short circuit condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.157-166
• /
• 1999

Numerical calculations of turbulent natural convection in an enclosure of the 20 kYA oil-immersed transformer model are presented. The transformer is modelled as two concentric cylinders with different heights and diameters. The thermal boundary layers are well represented in the temperature distributions along the wall of the transformer model. The flow stratification between the hot and cold walls can not be seen in the transformer model. The turbulence eddy viscosity has its maximum at the center of the core and its maximum values at the top of the core are larger than those at the bottom of the core.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.84-93
• /
• 2007

The pole transformer is one of the most important facility to insure the stability of electric power supply. which distributes electricity to customers directly. However there are a lot of defects which are caused by manufacturing fails(in 3 years) or deterioration (in 13 years), so we need a more improved transformer which insures quality. This thesis talks about the development of the new-type transformer using the hybrid insulation that is durable thermally, mechanically, and electrically. It would show how to lay out and produce the transformer using the hybrid insulation. And finally we are sure that we could increase the utilization rate of a transformer by 160% as compared with its own capacity through the overload test. Also, we carried out the examination about the short-circuit and insulation with a 100[kVA] model transformer, so that we expound the analysis of magnetic-mechanical forces intensity and the measure for improving short-circuit efficiency.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2002.03a
• /
• pp.89-94
• /
• 2002

본 논문에서는 배전분야 설비관리 시스템을 대상으로 배전설비 고장시 GIS 기능을 이용하여 고장설비를 예측할 수 있는 방법과 구현 실례를 소개하고자 한다. 배전설비관리를 위한 지리정보 데이터 모델은 가공과 지중, 전기와 비전기, 점형과 선형의 특성을 가지는 배전설비의 특성을 분석하여 모델링된다. 모델링의 결과 생성된 데이터베이스는 실세계에 존재하는 대부분의 객체에 대한 정보를 포함하고 있으므로 매우 크고 그 구조 또한 복잡하다. 그러므로 응용프로그램이 필요로 하는 데이터를 추출하기 위하여 많은 시간이 요구된다. 그러나 고장복구업무를 위한 시스템은 사용자의 만족도를 위하여 추론의 정확성과 더불어 응답속도를 최소화하는 것이 필수조건이다. 이를 위하여 GIS 데이터베이스 모델을 좀 더 개량할 필요가 있으며, 본 논문에서는 이에 대한 한가지 방안으로 배전설비의 GIS 모델의 축약된 형태인 관계형 데이터베이스 모델을 제시한다. 고장점 추론은 이렇게 만들어진 축약모델을 이용하여 진행되며 고장신고 고객별로 회선, 개폐기, 변압기, 인입주 등 정보를 추출하고 추출된 설비들의 계통상 위치의 유사성을 추론하여 최종 예측점을 파악한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1006-1009
• /
• 2015

Power-line communication technology is proposed to identify power transformers to serve customers in 3 phase -4 wires power distribution systems. Mathematical models for 3-phase power transformers, 3-phase wire lines, and customer loads are described to investigate the transmission characteristics of high frequency power line carrier. From the analysis, distribution line cable circuits have only a limited ability to carry higher frequencies. Typically power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. A novel power transformer identification system is designed and implemented. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.