• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.198-204
• /
• 1994

차량 축계의 비틀림진동은 엔진 공회전시와 정속주행시(완만한 가감속) 및 가속페달 급조작에 따른 급격한 가감속에 대해 각각 고유한 동특성을 나타내면서 차체의 진동과 소음을 유발시킨다. 공회전시의 진동해석 및 가속페달 급조작에 따른 차량 전후 진동에 대해서는 지금까지 많은 연구가 진행되어 상당한 발전을 이룩한 반면 완만한 가감속시 차량의 전속도 구간에서의 진동해석에 대해서는 해석상의 어려움으로 인해 주로 실험에 의한 접근 방법에 의존하고 있는 실정이다. 본 연구에서는 수동변속기가 장착된 전륜구동 승용차를 대상으로 차량 전속도 구간에서 축계의 비틀림진동 해석을 할 수 있는 방법을 개발하였으며, 개발된 방법을 트랜스미션 축진동 저감을 위한 클러치 비선형특성 튜닝에 적용하였다. 본 연구에서 개발한 강제진동해석방법은 수동변속기가 장착된 모든 종류의 차량에 적용할 수 있을 것으로 기대되며 자동변속기의 댐퍼클러치 설계에도 응용될 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.91-105
• /
• 1999

Dynamic simulation techniques are developed to analyze the shift characteristics of vehicle powertraisn with automatic transmission. In this study, the mathematical modeling of powertrain components such as engine , clutch system, planetary gear system and road load , is presented for the simulation. The clutch engagement condition, which determines the degree of freedom for the system, is also proposed .By using a detailed nonlinear model of torque converter, it is possibile to accurately analyze the extremely transient state such as the shift. Dynamo-based experiments are carried out to prove the validity of the proposed simulation techniques. Using the developed simulation program, the effects of the dynamic design variables and the control conditions , focused on the shift, are evaluated to improve the driving comforability.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.172-181
• /
• 1997

The dynamic characteristics during gear ratio change including the disturbance of output torque has been one of the most important issues in the study of automatic transmissions of passenger cars. In this paper, to investigate the dynamic characteristics of a passenger car automatic transmission during gear ratio change, a dynamic model of the driveline of a passenger car focused on the automatic transmission is proposed and the dynamic simulation program is developed. The results of the simulation show good agreements with the experimental data, which process the use fullness of the dynamic model and the simulation of the driveline.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.639-645
• /
• 2011

Wheel-loader is a construction vehicle for uploading soil or sand into truck and transportation of materials, which requires large driving power and high rotational speed. To improve the working efficiency, the operator has to shift gears and control levers for bucket & boom simultaneously. Therefore, the automatic transmission has been introduced to enhance operator's convenience and enable effective operation. To develop the automatic transmission for the wheel-loader, technologies such as gears and a clutch-pack design and shift algorithm are required for improvement of shift quality. In this paper, the shift algorithm for the wheel-loader was developed and its shift pattern was analyzed. As the shift control is affected by the pressure profile for the clutch control, the shift quality depending on the pressure profile has been evaluated using experiment and simulation model analysis.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.120-127
• /
• 1998

In this study the dynamic characteristics of automatic transmission system due to the change of the planetary gear ratio is studied. To study the power flow and shift quality for power transmission the simulation program is developed using the modeling and analysis technique. The results from this study will be used in designing the basic structure of automatic transmission using planetary gear system.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.373-378
• /
• 2013

엔진의 출력증대와 이에 따른 변속기의 크기 증가 등으로 인한 회전체의 관성증가로 변속기의 변속성능은 악조건이 되고 있다. 따라서, 이를 해결하기 위하여 내마모성이 높은 마찰소재의 개발이 요구된다. 디젤차량 수동변속기용 싱크로나이저 링에 요구되는 마찰특성에 적합한 소재를 개발하고, 이에 대한 접합 특성을 평가하였다. 즉, 철합금 모재와 동합금계 마찰재를 접합하는 공정을 개발하고, 접합층에 대하여 BSE분석, EDX분석을 수행하여 접합특성을 평가하였으며, 해당 시험편에 대하여 전단강도를 평가하였다.

• 에너지공학
• /
• 제23권2호
• /
• pp.28-34
• /
• 2014

자동변속기유는 자동차의 자동변속기의 성능을 유지시키기 위해 사용되는 유체이다. 최근 자동차 제조사에서는 일반적으로 자동변속기유를 80000~100000 km 주행후 교환 또는 무교환을 보증하고 있지만 국내에서는 많은 운전자들이 50000 km 이하에서도 자동변속기유를 교환하고 있는 것으로 조사되었다. 빈번한 자동변속기유의 교환은 환경오염과 차량유지비용을 상승시키는 원인으로 작용되고 있다. 본 연구에서는 사용하지 않은 신유와 50000 km와 100000 km를 각각 주행한 뒤 회수된 자동변속기유를 대상으로 인화점, 연소점, 유동점, 동점도, 저온겉보기점도, 전산가, 금속분과 같은 물리적 특성을 분석하였다. 연구결과, 신유에 비해 사용유는 전산가, 유동점, 금속분이 증가되는 것을 확인하였지만, 두 종류의 사용유(50000 km, 100000 km)의 물리적 특성과 금속분 함량의 차이는 크지 않음을 알수 있었다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.255-264
• /
• 2002

In this paper, the power transmitting mechanism for negative torque of the metal V-belt (MVB) CVT were investigated by theoretically analyzing variation of band tension, block compression forces for each of the primary and secondary pulleys. An experimental study was performed to investigate the speed ratio - thrust characteristics for negative torque. The experimental results are in good acoordance with the theoretical results. CVT line pressure control logic was suggested for negative torque based the speed radio - negative torque - thrust characteristics and the thrust ratio curves. The results of this study can be used as basic design materials for developing the CVT control system for negative torque.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2817-2824
• /
• 1994

A torque split type multi-pass CVT(MPC) system consiting of CVT and planetary gear train with 4 clutches was suggested to overcome the inherent inferior acceleration performance of CVT. Also, a shifting algorithm of MPC was suggested for the two driving modes : (1) power mode and (2) economy mode. By using the shifting algorithm and the MPC vehicle dynamic model, numerical simulations were performed to estimate the performance of the MPC vehicle. Simulation results showed that comparing the performance of the conventional 4-speed automatic transmission, an improvement in acceleration can be obtained by MPC for the power mode and 31% improvement in fuel economy for the economy mode.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.696-701
• /
• 2000

In this study, a mathematical model fur analyzing the shift characteristics is proposed. The proposed model comprises power transmission system and vehicle system, which are coupled. And On-road car test is carried out in order to extract model parameters. Tile model is composed of a detailed powertrain, an engine/AT housing, a simplified suspension system. tires and a vehicle body model. On the test, the vehicle accelerations and pitch ratio are measured by using accelerometers and gyro sensor. The other data, for example speeds, a throttle position and a brake signal, are taken from sensors which already exist in the vehicle. Using natural frequency and characteristic equation, vehicle model parameters are extracted from experimental data.