• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.278-283
• /
• 2003

트랙터 작업은 일반적으로 부하의 변동이 크기 때문에 잦은 변속이 요구되며, 견인 또는 다양한 작업기의 구동 등 작업 조건에 따라 적합한 작업 속도를 얻기 위한 많은 변속 단수가 요구된다. 이러한 특성 때문에 트랙터의 변속기는 큰 견인 부하에서도 정지하지 않고 원하는 속도로 원활하게 변속할 수 있어야 하며 동시에 동력 손실을 최소화할 수 있어야 한다 따라서, 트랙터 변속 장치는 작업 능률과 전동 효율을 동시에 고려할 경우, 작업 능률이 놀은 유압 변속과 동력 전달 효율이 놀은 기계식 동력 전달을 조합한 파워시프트 변속이 가장 우수한 것으로 판단된다. (중략)

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.251-256
• /
• 2003

트랙터는 작업 시 부하의 변동이 크고, 부하 변동에 따른 적합한 단수로 운전 작업이 요구되기 때문에 잦은 변속이 요구된다. 특히 유단 변속의 경우 변속 시 큰 부하의 변동과 부적절한 변속 단수 설정할 때 변속 충격이 발생할 수 있다 이러한 변속 충격은 작업 효율을 저하시킬 뿐 아니라 운전자의 승차 감을 저하시킨다. (중략)

• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.561-568
• /
• 2008

The quality of the automatic transmission shift for a wheel loader has been generally evaluated by driver's perception. However the subjective evaluation of the drivers is not always directly related to the shift quality. It is necessary to set up the method for an objective assessment of the shift quality. In this paper, a quantitative assessment method has been developed for the shift quality of the automatic transmission in a wheel loader. The indices for the evaluation were selected through the various tests like the acceleration and the turbine rpm as well as the subjective evaluation of the driver, and were validated by the correlation between subjective and objective assessments using a psychophysical power law. Based on this method, the shift quality of a wheel loader has been evaluated quantitatively under various shift conditions.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.654-662
• /
• 1998

Shift quality of an automatic transmission in a vehicle is mainly affected by transient pressures in the hydraulic system during shifting. In this study, dynamic modelings of the hydraulic system and the power train of an automatic transmission are made systematically by a bond-graph method. The dynamic characteristics of the line pressures and clutch/brake pressures during shiftings are investigated by simulations and verified by experiments. The effects of clutch/brake pressures on the shift torque are also investigated through driving simulation.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.17-26
• /
• 2022

Recently, automatic transmissions caused a good improvement in the shift quality of a forklift. An advanced shift control algorithm, which was based on TCU firmware, was applied with embedded control technology and microcontrollers. In the clutch-to-clutch shifting, one friction element is released and the other friction element is activated. During this process, if the release and application timings are not synchronized, an overrun or tie-up occurs and ultimately leads to a shift shock. The TCU, which measures only the speed of the forklift, inevitably applies the open-loop shift control. In this situation, the speed ratio does not change during the clutch fill. The torque phase occurs until the clutch is disengaged. In this study, an offline shift logic of the learning control was proposed. It induced a synchronous shift when the learning control progressed. During this process, the reference current trajectory of the release clutch was corrected and applied to the next upshift. We considered the results of the overrun/tie-up characteristics of the upshift performed immediately before. The vehicle test proved that the deviation in shift quality, which was caused by the difference in the mechanical characteristics of the clutch, could be improved by the learning control.

• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.117-124
• /
• 2019

국군이 운용중인 대부분의 군 전용차량은 개발이 완료된지 15년이 넘었으며, 개발 당시의 기술력과 정비성을 고려하여 수동변속기를 채택하고 있다. 수동변속기는 엔진과 변속기 사이에 동력을 조절/차단하는 클러치를 포함한다. 본 연구의 대상이 되는 2.5톤 군용차량은 수동변속기와 클러치 시스템을 적용하고, 클러치 커버와 릴리스 베어링 간극을 수동으로 조절해야 했다. 이러한 특성으로 인하여 클러치 디스크 조기마모, 클러치 커버 파손 등의 품질문제가 발생하였다. 본 연구는 발생된 품질문제를 해결하기 위하여, 클러치 커버와 릴리스 베어링의 간극을 자동으로 설정하도록 하고 클러치 디스크 자체의 성능도 향상시키는 과정을 거쳤다. 개선된 시스템을 평가하기 위해서, 단시간에 기어변속을 하는 가속내구시험을 수행하였으며 추가적으로 군인이 직접 운전을 하여 차량에 적용하였을 때 이상이 없음을 증명하였다. 본 연구활동을 통해, 클러치 간극을 조정할 필요가 없도록 하여 차량 정비 인력의 정비시간을 단축하였다. 또한, 클러치 간극을 조정해 주지 못함으로써 발생되는 품질문제를 해소하여, 근본적인 개선책을 제시하였다고 볼 수 있다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.663-670
• /
• 1998

Most of feedback shift controllers developed in the past have fixed control parameters tuned by experts using a trial and error method. Therefore, those controllers cannot satisfy the best control performance under various driving conditions. To improve the shift quality under various driving conditions, a new self-organizing controller(SOC) that has an optimal control performance through self-learning of driving conditions and driver's pattern is designed in this study. The proposed SOC algorithm for the shift controller uses simple descent method and has less calculation time than complex fuzzy relation, thus makes real-time control passible. PCSV (Pressure Control Solenoid Valve) control current is used as a control input, and turbine speed of the torque converter is used indirectly to monitor the transient torque as a feedback signal, which is more convenient to use and economic than the torque signal measured directoly by a torque sensor. The results of computer simulations show that an apparent reduction of shift-transient torque is obtained through the process of each run without initial fuzzy rules and a good control performance in the shift-transient torque is also obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.505-508
• /
• 1995

This paper suggests new hydraulic circuit to control the pressure of clutches and brakes which has several advantages than conventional hydraulic circuit in automatic transmissions. In conventional hydraulic circuit, the pressures of all friction elements are controlled by only one pressure control valve and accumlators. So, controllable range is limited and it is unable to control the friction elements independently. Therefore, we can not do the fine control of timing between apply clutch and release clutch which is needed in clutch-to clutch shifting automatic transmissions. To overcome these faults, we designed the direct-acting hydraulic circuit where one pressure control valve and pressure control solenoid valve are allocated to each friction element and control that independently. Through this structural improvement of hydraulic circuit, we can achieve elaborate aontrol to clutch pressure. Specially, We can control the timing between apply clutch and release clutch delicately which is needed in clutch-to-clutch shifting.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.577-580
• /
• 1995

This paper suggests direct-acting hydraulic circuit to control clutches and brakes in automatic transmission. As only one pressure control valve controls the pressure of several friction elements with accumulators in conventional hydraulic circuit, the controllable range is limited. In addition, it is difficult to control the fine timing between apply clutch and release clutch. So, we designed new method to control the pressure of clutch which uses ressure control valve and pressure control solenoid valve independently in each friction element. through this structure improvement of hydraulic circuit, we can control the pressure of clutches and brakes finely and fine timing of between apply clutch and release clutch.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.361-364
• /
• 2008

In this paper, several fields for improving shift quality and mode conversion quality are presented and considered. For a series type hybrid vehicle, improving mode conversion quality is important because it changes its speed with its own motors. A parallel type hybrid vehicle usually has AT or AMT, and its motor and engine can work independently. Therefore, improving both of two qualities is equally important in this case. For a power split type hybrid vehicle, improving mode conversion quality is more important due to the existence of planetary gears which change vehicle's speed.