• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.41-41
• /
• 2015

하천의 지형을 조사하고 계측하는 것은 하천을 연구하는 전문가들에게 필수적인 일이다. 하지만 하천의 지형을 계측하는 것은 쉽지 않으며, 조사를 하여도 유사의 이송으로 인하여 하천의 지형은 시간이 지남에 따라 변하게 된다. 그러므로 실험이나 모델링을 통하여 하천의 지형을 예측하고 모의하는 것은 중요한 연구이다. 모델링을 이용하여 유사이송에 의한 하상변동을 잘 예측하기 위해서는 하천의 복잡한 흐름을 정확히 모의하는 것이 중요하며 유사를 발생시키는 힘인 하상전단응력을 정확히 산정하는 것 또한 중요하다. 하상의 전단응력을 산정하는 방법으로는 대표적으로 로그법칙에 의한 방법, 레이놀즈응력 분포를 이용한 방법, 난류운동에너지를 이용한 방법 등이 있다. 앞서 말한 방법으로 산정된 전단응력 값은 차이를 보이며, 이는 하상변동을 정확히 모의하는 것에 문제를 발생시킬 수 있다. 따라서 본 연구에서는 곡선좌표계를 이용하여 3차원 유동 및 하상변동을 모의할 수 있는 수치모형을 이용하여 전단응력 산정 방법에 따른 하상변동량을 분석하는 것이다. 하천의 복잡한 흐름을 정확히 모의하기 위하여 본 연구에서는 RANS (Reynolds Averaged Navier-Stokes) 방정식을 3차원으로 해석하여 흐름 계산을 하였고 유사량 산정공식과 Exner 방정식을 이용하여 유사이송에 의한 하상변동을 계산하였다. 흐름 계산의 검증을 위하여 선행 연구의 실험을 대상으로 모의하였다. 그리고 곡선으로 된 실험 수로를 대상으로 전단응력 산

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.12-20
• /
• 1997

구조의 용접접합부에는 재료의 항복응력 크기의 용접잔류응력이 발생되고, 이 잔류응력 상태에서는 응력비(최소응력/최대응력)의 영향이 거의 없다는 것이 일정 진폭 하중조건의 피로실험결과로부터 알려져 있다. 이와 관련하여, 용접구조의 설계 단계에서는 초기 용접잔류응력이 그래도 잔류한 소형실험편의 일정진폭하중 상태의 피로실험 결과로부터 도출된 피로설계선도(S-N 선도)를 이용, 변동하중에 의한 응력 진폭의 밀도분포만으로 일생동안의 누적피해도를 구해 피로강도를 평가하는 것이 일 반적이다. 지금까지는 선박용접구조의 경우도 이러한 개념으로 피로강도 평가를 수행 하였으나, 일반적인 육상 또는 해상 용접구조물과는 달리, 화물의 적재 등의 정하중 이력에 의한 응력변동폭은 피로를 유발하는 파랑 응력변동폭보다 상당히 크다. 그리 고, 정하중에 의해 용접접합부에 인장응력을 발생시키는 하중이력을 받을 경우, 초기 용접잔류 응력은 상당히 저하될 것으로 생각된다. 본 연구에서는 인장응력을 유발하는 정하중 이력에 의해 저하된 용접잔류응력분포와 이러한 잔류응력분포를 가진 선측 종늑골 용접접합부의 피로강도를 검토한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.3
• /
• pp.19-27
• /
• 1987

부재가 피로하중을 받을 경우에는 피로하중의 변동과 균열의 성장에 인한 균열크기의 변동때문에 각순간에서의 응력확대계수가 변화하게 된다. 피로균열성장을 모델링할때 응력확대계수를 이용할 수 있는 타당성은 균열성장속도가 매우 느리므로 순간순간에서의 형상계수의 변화가 거의 무시할 수 있다는 사실에 근거하고 있다. 즉 균열의 길이는 순간순간에 일정하다고 생각하는 즉 준-정적인 문제로 귀착되며, 이 경우 에는 순간순간에 대응하는 단지 변동하는 하중에 대한 응력확대계수의 변동양상을 검토하면 되는 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.167-175
• /
• 1988

The principle objective of this study is to evaluate the fatigue behavior of structural steel components of highway bridges subjected to service stresses. The main aspects of this investigation are; 1) a measurement and statistical analysis of service stress cycles observed in highway bridge. 2) fatigue tests under equivalent constant-amplitude(CA) loading and simulated variable-amplitude(VA) loading 3) a evaluation of the fatigue behavior under VA-loading by eqivalent root mean cube (RMC) stress range. Theoretically, the RMC model is adequate in evaluation of fatigue behavior under VA-loading, because the regression coefficient (m) of crack growth rate is 3 approximately. The result of fatigue test shows that the RMC model is fitter than the current RMS model in fatigue evaluation under VA-loading. The interaction effects and sequence effects under VA-loading affect little fatigue life of structural components. As the transition rate of stress ranges is higher, the crack growth rate is higher.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.529-537
• /
• 2006

This paper investigates the impacts of the drag-related weighting coefficients on mean velocity and turbulence structures. The transport equations for the Reynolds stress of vegetated open-channel flows are derived by using the temporal- and horizontal-averaging scheme. It is found that the total Reynolds stress of vegetated open channel flows consists of the Reynolds stress due to temporally fluctuating velocities and the Reynolds stress due to spatially fluctuating velocities. The drag-related weighting coefficient $C_{fk}$ for the total Reynolds stress component is found to be unit, while the coefficient for the Reynolds stress due to temporally fluctuating velocities can be negligible. This is the reason why very small weighting coefficients in previous studies yield very good agreements with measured data. In other words, the Reynolds stress due to spatially fluctuating velocities remains still unknown, especially due to the large number of measuring locations. Through a developed Reynolds stress model, vegetated open-channel flows are simulated and compared with measured data from the literature. Comparisons reveal that the computed mean flow and Reynolds stress structures are hardly affected by the drag-related weighting coefficients. However, the computed turbulence intensity profiles are significant different with the drag-related weighting coefficients. A budget analysis of the transport equations for the Reynolds stress component is carried to investigate why turbulence intensity is affected by the drag-related weighting coefficients.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.293-302
• /
• 1991

The anomalous sea level deviation or storm surge caused by the typhoon Thelma in 1987 are studied analysing tidal observation data at 7 stations in the south coast of Korean peninsula. The surges are calculated by subtracting the predicted tidal height from the observed tidal record. The tidal deviation at these stations along the coast are discussed in association with meteorological data. The sea level anomalies are studied by means of the empirical orthogonal function (EOF) analysis and the fast fourier transform (FFT) method. The results of analysis suggest that the peak value of surges are higher at the tidal stations in semi-enclosed bay and in long narrow channel than at the ones facing with the open sea. From the result of EOF analysis, the temporal and spatial fluctuations of storm surge can be described by the first EOF mode, which explains 63% of the total variances during the passage of typhoon Thelma. The deviation of storm surge in the studied areas indicates bi-modal peak during the passage of typhoon Thelma. From the results of FFT spectrum analysis, the peak of energy of autospectrum for surge, atmospheric pressure, and wind stress appeared at low frequency fluctuations band of 0.008-0.076 cph over the 4 stations. Auto-correlation function of surge showed periodicity, while that of atmospheric pressure and wind stress indicates no periodicity. The result of FFT analysis shows that the typhoon surges are related chiefly with the change of atmospheric pressure in an open bay (Cheju Harbor), but with the wind stress in a semi-enclosed bay (Yeosu Harbor).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.404-412
• /
• 1991

In the design of high speed machinery, designers must consider the problem of possible structural failure due to excessive dynamically varying stresses, which are induced by the varying external loads and internal inertia forces, in the links of the mechanism. A study of the dynamically induced stresses would indicate what values of the minimum permissible fatigue strength should be for safe mechanism operation. This paper investigates the nature of the stress fluctuation in high speed mechanism on the basis of the effects of both the loads and the friction. The latter is apt to be neglected in the usual analysis in spite of the fact that it is always generated in the operating machinery. The analysis is performed on the coupler of the slider-crank mechanism for illustrative purposes and the results are expressed in a non-dimensional form for design applications.

• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.184-191
• /
• 2000

본 연구에서는 국내 10MW급 기력발전소의 소형 터빈 로터에 대한 응력 해석을 실시하였다. 터빈 로터의 기하학적 형상, 증기의 온도 및 압력 등의 기동조건 변화, 로터 재료의 온도에 따른 물성값 등을 고려하여 대류 열 전달계수를 계산하는 사용자 부프로그램을 구성하였으며, 이를 바탕으로 열해석을 실시하여 로터의 온도 분포를 결정하였다. 이 온도분포 조건에서 시간 경과에 따른 열응력 해석을 실시하여 로터의 응력 분포를 결정하였으며 그 결과 취약부위에서의 응력변동 범위 및 가동중 정상상태 응력수준을 결정하였다. 이 취약부위의 응력값과 운전이력을 이용하여 크리프 수명과 피로수명을 계산하고 로터의 잔여수명을 결정하는 방법을 논의하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.45-52
• /
• 2019

Steel corrosion due to carbonation in RC (Reinforced Concrete) structures easily occurs in urban cities with high CO₂ concentration. RC structures are always subjected to external loading with various boundary conditions. The induced stress level causes changes in diffusion of harmful ion like CO₂. In this work, a quantification of carbonation progress with stress level is carried out and carbonation prediction is derived through the relations. Determining the design parameters like cover depth, CO₂ diffusion coefficient, carbonatable materials, and exterior CO₂ concentration as random variables, service lifes under carbonation with design parameter's variation are obtained through MCS(Monte Carlo Simulation). Additionally the service life with different stress level is derived and the results are compared with those from deterministic method. Cover depth and cement hydrates are evaluated to be very effective to resist carbonation, and the proposed method which can consider the effect of stress on service life can be applied to maintenance priority determination.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.223-230
• /
• 2012

The strength of brittle material has commonly been characterized by a normal distribution or Weibull distribution, but it may fit the gamma distribution for some material. The use of an extreme value distribution is proper when the largest values of a set of stresses dominate the failure of the material. This paper presents a formula for reliability estimation based on stress-strength interference theory that is applicable when the strength of material is distributed like a gamma distribution and the stress is distributed like an extreme value distribution. We verified the validity of the equation for the reliability estimation by examining the relationships among the factor of safety, the coefficient of variation, and the reliability. The required minimum factor of safety and the highest allowable coefficient of variation of stress can be estimated by choosing an objective reliability and estimating the reliabilities obtained for various factors of safety and coefficients of variation.