• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.657-665
• /
• 2007

In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion of WDM channels in mid-span spectral inversion (MSSI) technique is overcame by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}\;40\;Gbps$ WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15\;km$ from 500 km for efficiently compensating overall channels.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.95-99
• /
• 2005

This paper presents an accurate recovery method of the reference clock which is needed for network synchronization in two-way satellite multimedia systems compliant with DVB-RCS specification and which use closed loop method for burst synchronization. In these systems, the remote station transmits TDMA burst via return link. For burst synchronization, it obtains reference clock from program clock reference (PCR) defined by MPEG-2 system specification. The PCR is generated periodically at the hub system by sampling system clock which runs at 27MHz $\pm$ 30ppm. Since the reference clock is recovered by means of digital PLL(DPLL) using imprecise PCR values due to variable random jitter, the recovered clock frequency of remote station doesn't exactly match reference clock of hub station. We propose a robust recovery method of reference clock against random delay jitter The simulation results show that the recovery error is remarkably decreased from 5 clocks to 1 clock of 27MHz relative to the general DPLL recovery method.

• 한국해양학회지
• /
• v.23 no.4
• /
• pp.184-193
• /
• 1989

To study the pelagic fish egg community in the mid-east coastal waters of the Yellow Sea, pelagic eggs were sampled with Bongo net at 13 stations from Chonsu Bay to Keum Estuary from July, 1985 to June, 1986. Nineteen taxa of pelagic eggs were collected. Among them, 7 taxa were identified to the species level, and 2 taxa to the family level. Engraulis japonica was the most abundant species with 89.5% of the total eggs; Sillago japonica was 2.5%; Clupanodon punctatus, 2.4%; Herklotsichthys zunasi, 1.7%; Callionymidae spp., 1.6%. These 5 taxa occupied 97.7% of the total eggs. Pelagic eggs occurred from April to October. In June and July, their abundances were high, but the species diversities were low as E. japonica eggs were predominant. The range of spawning temperature for each taxa were estimated from the occurence pattern of the pelagic eggs.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.326-332
• /
• 2011

Radial variation of sound absorption capability and air permeability of yellow poplar (Liriodendron tulipifera) wood in cross sectional surface and effect of steam explosion treatment were estimated by the two microphone transfer function method and the capillary flow porometry, respectively. The sound absorption coefficients of steam explosion treated wood was higher than those of control wood and these values increased with frequency. Abundant and big vessel may behave as sound absorbing pore observed on the cross sectional surface of yellow poplar wood. The sound absorption coefficients and air permeability of sapwood were higher than those of heartwood for Liriodendron tulipifera.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.8-14
• /
• 2020

The objective of this research is to investigate how implementation of smart factory systems(SFS) effects management accounting(MA). The results based on data collected from 108 Korea small and medium enterprises(SME) confirmed that SFS implementation caused significant MA changes. Estimated regression models revealed that the most important SFS characteristic were the analytical capabilities since it positively influenced MA changes in four dimensions: internal reporting, budgeting, application of modern accounting techniques and MA employee's job. In the segment of budgeting, the quality of implementation of specialized bedgeting software had significant and positive influence. The only negative correlation founded was the one between the uncertainty of business environment and adoption of modern accounting techniques. Results from this study provide that SME should put special focus on implementation of business analytics modules in order to achieve comprehensive benefits in MA prctices.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.186-195
• /
• 2005

Topography of beach line is keeping stability for several years, their soil values have been maintained in balances. Install of coastal structures have caused deformation for beaches and acted as a function to structures. Therefore, quantitative prediction of beaches topography according to structure install is required to prevent the beaches deformation and progress proper coastal preservation work. In this study, we analyzed coastal changes caused by erosion and accretion according to development and drew up a cross-section to share 8 stations using coordinates and depth surveying in groin of Soheuksan island port. Elevation distribution and changes by observation period is calculated -0.30m~+0.20m after comparing results of five months in October 7, 2004 surveying results and fell into insignificance. We thinks periodic observation of coastal erosion and accretion take place for the season and long-term coastal changes in beaches width is analyzed.

• Plant Journal
• /
• v.16 no.1
• /
• pp.38-43
• /
• 2020

In this study, Seochon Thermal Power Plant No.1 for anthracite coal was tested to find the proper operation range of limestone slurry pH in the absorber tower which can be operated continuously in compliance with the Air Quality Preservation Act and Seocheon Thermal Power Division's internal regulation, sulfur dioxide average emission regulation. When operating the sulfur dioxide concentration [ppm] in the combustion gas flowing into the desulfurization absorption tower at 370, 400, 460 and 550 ppm while the main operating elements such as the flow rate of the combustion gas were fixed, the proper slurry pH Were 4.4, 4.5, 4.8 and 5.1, respectively. Therefore, it is recommended to operate with the correlation equation, R_pH=0.004×C_in+2.93 derived using sulfur dioxide and the appropriate slurry pH.

• The Korean Journal of Financial Management
• /
• v.14 no.1
• /
• pp.23-50
• /
• 1997

Shiller(1981)와 LeRoy-Porter(1951)에 의하여 시작된 분산한계검증(分散限界檢證)(variance bounds test)에 관한 연구는 주식시장에서 초과변동성(超過變動性)(excess volatility)의 존재를 통하여 주식시장(株式市場)의 효율성(效率性)을 검증하는 새로운 연구분야로서 주목을 받아왔다. 그리고 이들의 연구방법론을 응용하여 많은 효율적(效率的) 시장가설(市場假說)의 검증에 대한 연구가 이루어져 왔다. 본(本) 연구(硏究)는 이러한 연구(硏究)의 한 범주로써 한국주식시장(韓國株式市場)에서 분산한계검증(分散限界檢證)을 통하여 약형효율성(弱形效率性) 시장가설(市場假說)을 검증(檢證)하고자 하였으며 이를 위하여 먼저 Shiller (1981)의 배당평가모형(配當評價模型)을 이용한 사후적(事後的)인 합리적(合理的) 주가(株價)인 $P_t{^*}$의 추정방법(推定方法) 대신에 이 배당평가모형(配當評價模型)을 변형하여 $P_t{^*}$를 추정(推定)하는 방법을 제시하였다. 그리고 이 $P_t{^*}$를 기초로 Shiller(1981)의 분산한계검증식(分散限界檢證式)을 변형한 분산한계검증(分散限界檢證)의 조건식(條件式)을 유도하고 이에 의해 실증적(實證的) 검증(檢證)을 하였다. 한편, 이러한 검증과정(檢證過程)에서 시계열자료(時系列資料)의 특성상 사전적(事前的)으로 필요로 하는 실제주가(實際株價), $P_t$와 사후적(事後的)인 합리적(合理的) 주가(株價), $P_t{^*}$에 대한 단위근검정(單位根檢定)(unit root test)을 실시하였다. 아울러 $P_t$와 $P_t{^*}$의 선형관계(線形關係)의 안정성을 검정하기 위하여 공적분검정(共積分檢定)(cointegration test)도 실시하였다. 검증결과(檢證結果), Shiller(1981)의 분산한계검증식(分散限界檢證式)을 변형하여 유도된 효율성조건(效率性條件)을 만족시키는 범위(範圍)에 벗어나 한국주식시장(韓國株式市場)에서 주식시장(株式市場)의 비효율성(非效率性)을 배제할 수 없는 것으로 나타났다.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.103-112
• /
• 2003

Various kinds of metals were coated on synthetic graphite in order to investigate the relationship between film characteristics and their electrochemical performance. Gas suspension spray coating method was employed for the coating of synthetic graphite. In our experimental range, all of the metal coated synthetic graphite showed the higher capacity than that of raw material at high C-rate mainly due to decrease in impedance of passivation film. In cyclic voltammetry experiments, silver-coated and tin-coated graphite anodes found the lithium-alloy reaction. Considering smaller amount of metal coating, the most increase in discharge capacity was caused by improvement of conductivity of the electrode. When single-component metal was coated, silver-coated graphite anode exhibited the highest discharge capacity and better cycleability. Double components of silver-nickel coated active material showed the highest discharge capacity, rate capability and the best cycle performance in the range of our experiments.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.891-896
• /
• 2015

This experimental study investigated the wake flow around an elastically supported circular cylinder. In this study, the Reynolds numbers are varied in the region of $1.4{\times}10^4{\leq}Re{\leq}3.2{\times}10^4$. Under these conditions, we have captured the process of the wake mechanism and the moving path of the vortex by measuring the velocity at each position in the wake around the cylinder. Further, these facts from the wind tunnel test are proved by a flow visualization test through a water channel. From the result, we have arrived at the following conclusions : i) The process (formation${\rightarrow}$growth${\rightarrow}$collapse) of vortex is observed in the wake around the cylinder, ii) The vortex efflux angle is approximately $16^{\circ}{\sim}17^{\circ}$ under the experimental conditions. These angles have no relationship with the velocity change and the existence of flow-induced vibrations of the cylinder, and iii) The moving path of the vortex center is obtained by spectrum analysis of the fluctuating velocity behind the cylinder. These are confirmed by conducting visualization tests.