• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.75-82
• /
• 2021

Low-temperature combustion (LTC) strategies, such as HCCI (Homogeneous Charge Compression Ignition), PCCI (Premixed Charge Compression Ignition), and RCCI (Reactivity Controlled Compression Ignition), have been developed to effectively reduce NOx and PM while increasing the thermal efficiency of diesel engines. Through numerical analysis, this study examined the effects of the injection timing and two-stage injection ratio of diesel fuel, a highly reactive fuel, on the performance and exhaust gas of RCCI engines using gasoline as the low reactive fuel and diesel as the highly reactive fuel. In the case of two-stage injection, combustion slows down if the first injection timing is too advanced. The combustion temperature decreases, resulting in lower combustion performance and an increase in HC and CO. The injection timing of approximately -60°ATDC is considered the optimal injection timing considering the combustion performance, exhaust gas, and maximum pressure rise rate. When the second injection timing was changed during the two-stage injection, considering the combustion performance, exhaust gas, and the maximum pressure increase rate, it was judged to be optimal around -30°ATDC. In the case of two-stage injection, the optimal result was obtained when the first injection amount was set to approximately 60%. Finally, a two-stage injection rather than a single injection was considered more effective on the combustion performance and exhaust gas.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.165-189
• /
• 2006

The purpose of this study is to examine process and organization of local government-managed construction by reviewing official documents and materials in regard to the official residences and castles officially constructed in Dongnae in the 19c Chosun Dynasty. Results of this study can be described as follows. 1) The construction of official residences requires exchanges of official documents among upper and lower governmental agencies concerned. Previously prepared for some 1 or 2 months, the construction was proceeded through proceeded from Paok to Gaegi, Ipju, Sangryang, Gaeok and to Iptaek. Such construction was carried out independently and concurrently Gijang and Yangsan neighboring Dongnae provided cooperation by way of supplying labor and timbers. 2) Dongnaebu castle was constructed under local autonomy system, like other government-oriented works, as governor of Dongnae became responsible for defending such establishment in 1739. The castle was built up in 1731 as an establishment with 6 gated and 15 forts. Directly controlled by governor of Dongnae, the castle continued to be partially repaired until the 19th century. Under the regime of Daewongun, the castle was enlarged and extended for military strengthening. Besides the gate having double-gated structure for the outside wall, the other five gates came to have bastions and 30 forts were additionally established, dramatically changing the structure of the castle as whole. 3) Government-managed construction was often implemented by an organization whose members included local government officials, lower administrative agencies and local influential persons. The construction of official residences was implemented by Gamyeokdogam which was headed by Jwasu of Hyangcheong. In the construction, chief of military officials became supervisor, who was responsibly supported by Saekri. The construction of castled were divided into several works, for example, establishments of fortress, tower gate and quarrying stone were implemented by the organization of Paejang, Gamkwan and Saekri. As a military official, Gamkwan supervised the construction. Saekri was in charge of related internal affairs. Paejang was an technical expert leading several workers. The construction of castles in 1870 were organized as a general rule having particularity of social conditions on Dongnae.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.642-650
• /
• 2020

In general, the circulation path of the fluidized particles in a CFB (Circulating Fluidized Bed) boiler is such that the particles entrained from a combustor are collected by a cyclone and recirculated to the combustor via a sealpot which is one of non-mechanical valves. However, when a fluidized bed heat exchanger (FBHE) is installed to additionally absorb heat from the fluidized particles, some particles in the sealpot pass through the FBHE and then flow into the combustor. At this time, in the FBHE operated in the bubbling fluidization regime, if the heat flow is not evenly distributed by poor mixing of the hot particles (800~950 ℃) flowing in from the sealpot, the heat exchanger tubes would be locally heated and then damaged, and the agglomeration of particles could also occur by formation of hot spot. This may affect the stable operation of the circulating fluidized bed. In this study, the unevenness of heat flow arising from structural problems of the FBHE of the domestic D-CFB boiler was found through the operating data analysis and the CPFD (Computational Particle Fluid Dynamics) simulation using Barracuda VR. Actually, the temperature of the heat exchanger tubes in the FBHE showed the closest correlation with the change in particle temperature of the sealpot. It was also found that the non-uniformity of the heat flow was caused by channeling of hot particles flowing in from the sealpot. However, it was difficult to eliminate the non-uniformity even though the fluidizing velocity of the FBHE was increased enough to fluidize hot particles vigorously. When the premixing zone for hot particles flowing in from the sealpot is installed and when the structure is changed through the symmetrization of the FBHE discharge line for particles reflowing into the combustor, the particle mixing and the uniformity of heat flow were found to be increased considerably. Therefore, it could be suggested that the structural modification of the FBHE, related to premixing and symmetric flow of hot particles, is an alternative to reduce the non-uniformity of the heat flow and to minimize the poor particle mixing.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.441-448
• /
• 2015

This study aims to suggest a reasonable signal operation method for right-turn traffic management. It was found that the right-turn vehicle supplementary signal is currently operated without clear regulations or criteria. It was also analyzed that right-turn supplementary signals are used without consistency, there is a risk of traffic accidents due to the discordance between supplementary signals and traffic signals of forward vehicles, there is a lack of basis for prohibition of a right turn when right-turn vehicle's supplementary signal is red and the flashing red signal is used in a different sense from the law. In order to see the effect of the installed right-turn vehicle supplementary signals on traffic signal violation, a field investigation was conducted. As the result, there was a high proportion of signal violation on the approach lane with right-turn supplementary signals and this means that right-turn supplementary signals hardly influenced the reduction in proportion of signal violation during a right turn. Additionally, a survey was carried out to see if there were differences in driver's interpretation of traffic signals depending on the installation of right-turn supplementary signals. As the result of the survey, there were no differences in interpretation of traffic signals depending on the installation of right-turn supplementary signals or the types of right-turn supplementary signals. A right turn when the signal was red did not lead to serious traffic accidents, so it is thought that there should be a careful consideration of a total ban on a right turn when the signal is red, in order to prevent driver's confusion due to the change of the signal system. Unless there is a disturbance to cars and pedestrians after a temporary stop when the signal is red, there is a need to specify that vehicles must stop temporarily in the Road Traffic Act to facilitate a right turn. What this study finally suggested is to use tri-colored arrow signals for right-turn car supplementary signals to convey a signal to a driver clearly.

• (The) Korean Journal of Advertising
• /
• v.27 no.3
• /
• pp.7-25
• /
• 2016

According to recent studies, the location of visual information has a significant impact on consumers' interpretation and judgment in various contexts. In particular, vertical positioning is relevant to the perception of weight: consumers tend to interpret that products are heavier when information is placed at the bottom of a page or section rather than the top. This is due to the common perception that heavy things would sink to the bottom and light things would float up. Consistent with this research stream, the current study investigates how the vertical location of freebie information influences promotion evaluation. We hypothesize that consumers assume that the complimentary product is heavier when the information about it is displayed at the bottom compared to when the information is displayed at the top. Two experiments were conducted. In experiment 1, we show how the location of "get one free" information impacts the evaluation of the sales promotion in a "Buy two and get one free" context. When the complimentary information was displayed below rather than above the main product information, consumers evaluated the sales promotion more favorably. Experiment 2 tests the generalizability of the vertical location effect by using a different type of information and product: a visual picture of vitamin tablets rather than the numeric information as in Experiment 1. The dependent variable was also extended to the perceived amount of the promoted product. We suggest the boundary condition that the proposed effect is moderated by the presence or absence of an explicit message about the amount. Without an explicit message about the amount of the product, the results were similar to those of experiment 1 in that consumers perceived that the product offered a greater amount when the complimentary information was displayed at the bottom rather than at the top. However, the location effect disappeared with an explicit message about the amount. This confirms the moderating effect that presenting an explicit message about the amount is a crucial boundary condition for location effect in a value added promotion. Marketers can use this knowledge to formulate strategies in a variety of sales promotion conditions.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.4
• /
• pp.325-333
• /
• 2001

Background : This study aimed to estimate the clinical outcome and identify the characteristics of a group of patients with pulmonary tuberculosis who completed anti-tuberculosis therapy with the First-line drugs in spite of having positive smear results with negative sputum culture results over the previous six months. Method : A retrospective chart review of 21 patients who fulfilled the above criteria between 1995 and 1999 was performed. The laboratory data as well as the clinical data of the patients with positive smear results and negative culture results over a six months period were reviewed. Results : The negative conversion of sputum culture results was achieved within $1.3{\pm}1.2$ months and the negative conversion of the sputum smear results was accomplished during $9.5{\pm}3.3$ months. Chest X-rays at 5 months following the institution of anti-tuberculosis therapy from all patients revealed improvements. Four out of 21 patients(19%) relapsed during the follow up, $15.2{\pm}13.4$ months after administering anti-tuberculosis therapy for $13.3{\pm}3.1$ months. Relapses were confirmed from between 3 months and 4 months after the treatment completion. Only one of the four relapses had no past history of anti-tuberculosis therapy and the others had prior treatment twice (p<0.01). The period of anti-tuberculosis treatment was extended to a mean of $4.6{\pm}2.6$ months in 12 patients. However, prolongation of anti-tuberculosis therapy had no affect on the relapse rate (odds ratio, 95% CI 0.18, 2.15). Conclusion : Prolongation of therapy with the First-line drugs is not necessary for patients with persistently positive smear results over 6 months and negative culture results. A patient who has had prior anti-tuberculosis therapy more than twice should be paid the closest attention.

• Journal of Korean Philosophical Society
• /
• v.129
• /
• pp.315-339
• /
• 2014

Diese Abhandlung untersucht Jacobis ${\ddot{U}}ber$ die Lehre Spinoza und den von diesem veranlassten Spinoza-Streit. Damit sie $enth{\ddot{u}}llt$ zuerst Jacobischen Zusammenhang zwischen transzent und immanent und folgt auf seine Wirkungsgeschichte in der Moderne. Ich rekonstruiere den Streit zwischen Jacobi und Lessing und danach interpretiere dessen Rezeption durch Hegel und Schleiermacher. Lessing stellt anstatt der traditionellen Begriffe der Gottheit ἑν ${\kappa}{\alpha}{\iota}$ ${\pi}{\alpha}{\nu}$ auf. $Demgegen{\ddot{u}}ber$ behauptet Jacobi Salto mortale um ihn ${\ddot{u}}berschreiten$ zu $k{\ddot{o}}nnen$, indem er Lessing als Pantheist und Atheist bestimmt. Salto mortale bei Jacobi ist der Sprung zu dem ${\ddot{U}}bernat{\ddot{u}}rlichen$ und dem Glaube. Der Streit zwischen Jacobi und Lessing ist der zwischen dem Naturalismus und ${\ddot{U}}bernaturalismus$ und $dar{\ddot{u}}berhinaus$ der zwischen dem Athismus und Theismus. $W{\ddot{a}}hrend$ die Natur der Inbegriff der Bedingten ist, ist Gott der absolute Anfang der Natur $au{\ss}erhalb$ des Naturzusammenhangs. $W{\ddot{a}}hrend$ Spinoza Gott im $nat{\ddot{u}}rlichen$ Zusammenhang begreift, $fa{\ss}t$ Jacobi den im ${\ddot{u}}bernat{\ddot{u}}rlichen$ auf. Deus sive natura bei Spinoza $ver{\ddot{a}}ndert$ sich Gott im Menschen bei Jacobi. Gott im Menschen ist nichts anders als das Prinzip des Lebens und das aller Vernuft. In diesem Zusammenhang $fa{\ss}t$ Hegel Gott als Geist denn Subjekt des Lebens auf und $h{\ddot{a}}lt$ das Wesen des Geistes $f{\ddot{u}}r$ die sich selbst vermittelnde Bewegung. Dies zeigt sich als die Spinoza ${\ddot{u}}berbietende$ Immanenzphilosophie. $Demgegen{\ddot{u}}ber$ behauptet Schleiermacher die Einheit des Endlichen und Unendlichen in der $religi{\ddot{o}}sen$ Anschuung. Die Verbindung von Mensch und Gott ist die im Endlichen immanent bleibende Anschauung der $g{\ddot{o}}ttlichen$ Eigenschaft. Dies zeigt das transzendente im immanenten.

• Journal of KIISE:Databases
• /
• v.32 no.4
• /
• pp.345-361
• /
• 2005

A transform-space index indexes objects represented as points in the transform space An advantage of a transform-space index is that optimization of join algorithms using these indexes becomes relatively simple. However, the disadvantage is that these algorithms cannot be applied to original-space indexes such as the R-tree. As a way of overcoming this disadvantages, the authors earlier proposed the transform-space view join algorithm that joins two original- space indexes in the transform space through the notion of the transform-space view. A transform-space view is a virtual transform-space index that allows us to perform join in the transform space using original-space indexes. In a transform-space view join algorithm, the order of accessing disk pages -for which various space filling curves could be used -makes a significant impact on the performance of joins. In this paper, we Propose a new space filling curve called the adaptive row major order (ARM order). The ARM order adaptively controls the order of accessing pages and significantly reduces the one-pass buffer size (the minimum buffer size required for guaranteeing one disk access per page) and the number of disk accesses for a given buffer size. Through analysis and experiments, we verify the excellence of the ARM order when used with the transform-space view join. The transform-space view join with the ARM order always outperforms existing ones in terms of both measures used: the one-pass buffer size and the number of disk accesses for a given buffer size. Compared to other conventional space filling curves used with the transform-space view join, it reduces the one-pass buffer size by up to 21.3 times and the number of disk accesses by up to $74.6\%$. In addition, compared to existing spatial join algorithms that use R-trees in the original space, it reduces the one-pass buffer size by up to 15.7 times and the number of disk accesses by up to $65.3\%$.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.73-85
• /
• 2004

Recently, as the growth of the wireless Internet, PDA and HPC, the focus of research and development related with GIS(Geographic Information System) has been changed to the Real-Time Mobile GIS to service LBS. To offer LBS efficiently, there must be the Real-Time GIS platform that can deal with dynamic status of moving objects and a location index which can deal with the characteristics of location data. Location data can use the same data type(e.g., point) of GIS, but the management of location data is very different. Therefore, in this paper, we studied the Real-Time Mobile GIS using the HBR-tree to manage mass of location data efficiently. The Real-Time Mobile GIS which is developed in this paper consists of the HBR-tree and the Real-Time GIS Platform HBR-tree. we proposed in this paper, is a combined index type of the R-tree and the spatial hash Although location data are updated frequently, update operations are done within the same hash table in the HBR-tree, so it costs less than other tree-based indexes Since the HBR-tree uses the same search mechanism of the R-tree, it is possible to search location data quickly. The Real-Time GIS platform consists of a Real-Time GIS engine that is extended from a main memory database system. a middleware which can transfer spatial, aspatial data to clients and receive location data from clients, and a mobile client which operates on the mobile devices. Especially, this paper described the performance evaluation conducted with practical tests if the HBR-tree and the Real-Time GIS engine respectively.