• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.227-231
• /
• 2004

A total of 219 polymerase chain reaction tests of genetically modified (GM) DNA sequences in soybean seeds and soybean sprouts were conducted during 2000-2001. No CM gene was found in 96 tests of soybean seeds. However, either a functional CP4EPSPS gene or the 355 promoter gene was found three times in 2000 and eight times in 2001, in between 0.01 and 0.17％ of soybean spout products, in 123 tests. Since the amount of GM genes was much less than the threshold limit of 3％, none of the 11 positive soybean-sprout samples needed to be libeled GM crops. Of these, seven sprout samples were from domestic seeds and four were from seeds imported from China. To find the contamination route, the raw materials, seed surface, floor of the storage room, area around the selection machine, surface of the packaging film and corn powder used in the package were tested. The 35S promoter gene was detected in only two samples of the corn powder (0.1％). Although we could not find the cause of the GM contamination, the sprout package film is one possibility. In total,8.9％ of the soybean sprout tests were GM positive, but the amounts were much less than the threshold of 3％. This means that there are frequent false-positives and these would threaten the sprout industry if GMO were decided qualitatively. Food companies should make their safety data available to the public and make an effort to address people's concerns about GM food more openly. In addition, there is a need to establish a quantitative test for GM genes in sampled water and a sampling method for raw materials.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.379-382
• /
• 1997

The effects of different concentrations of ${\alpha}-tocopherol,\;{\delta}-tocopherol$, BHA, BHT and TBHQ on the oxidative stability of perilla oils undergoing autoxidation during storage at $50^{\circ}C$ were studied. ${\alpha}-\;and,\;{\delta}-tocopherols$ were added as concentrations of 100, 200, 300 and 400 ppm to the perilla oils from the unroasted seeds or the roasted seeds at $190^{\circ}C$ for 20 min. BHA, BHT and TBHQ were also added to the perilla oils described above as concentrations of 50, 100, 150 and 200 ppm, respectively. The oxidative stability of perilla oils was estimated by the antioxidative index (AI: the induction periods of oils with antioxidants/the induction periods of oils without antioxidants) on the basis of the peroxide values. The roasted perilla seed oil was more stable than the unroasted seed oil in autoxidation. The addition of ${\alpha}-\;and,\;{\delta}-tocopherols$ accelerated the autoxidation of perilla oils. BHA did not show antioxidant effects, but BHT showed very weak antioxidant effects. The autoxidation of perilla oils, however, was effectively prevented by the addition of TBHQ. TBHQ showed activity in preventing 5 times on the autoxidation of perilla oils. Therefore, the oxidation stability of perilla oils seemed to be depend both on the roasting process and the kind of antioxidants.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.24-32
• /
• 2010

In the present work, a new separation system with rotating rakes has been developed to separate the film-based plastics from the recyclable materials, and environment assessment is also carried out during operation of the device. Capacity of the device was about 5.3 ton/hr at a rakes rotation speed of 26.0 rpm (the number of rakes in the 1st, 2nd and 3rd trials were 39, 52 and 48, respectively) and a belt conveyor speed of 38.5m/min, which satisfied the initial design capacity (5.0 ton/hr). Recovery ratio and purity of the plastic films were 92.6% and 96.5%, respectively at a rotation speed of 28 rpm. The levels of noise, vibration and particulate emission were below material standard regulatory limits. Plastic refused fuel (RPF) was also prepared with the recovered films. The calorific value and chlorine content of the prepared RPF were 9,740 kcal/kg and 0.18%, respectively which satisfy the first grade quality specification of the Korean RPF standard. As a result of this work, recovery of energy resources from the municipal solid waste is possible by adopting the developed separation device.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2008

This study proposed the method of phosphate recovery from municipal wastewater by using ferrous iron waste, generated from the mechanical process in the steel industry. In the analysis of XRD, ferrous iron waste was composed of $Fe_3O_4$ (magnetite), practically with $Fe^{2+}$ and $Fe^{3+}$. It had inverse spinel structure. In order to identify the adsorption characteristic of phosphate on ferrous iron waste, isotherm adsorption test was designed. Experimental results were well analyzed by Freundlich and Langmuir isotherm theories. Empirical constants of all isotherms applied increased with alkalinity in the samples, ranging from 1.2 to 235 $CaCO_3/L$. In the regeneration test, empirical constants of Langmuir isotherm, i.e., $q_{max}$ (maximum adsorption capacity) and b (energy of adsorption) decreased as the frequency of regeneration was increased. Experiment was further performed to evaluate the performance of the treatment scheme of chemical precipitation by ferrous iron waste followed by biological aerated filter (BAF). The overall removal efficiency in the system increased up to 80% and 90% for total phosphate (TP) and soluble phosphate (SP), respectively, and the corresponding effluent concentrations were detected below 2 mg/L and 1 mg/L for TP and SP, respectively. However, short-circuit problem was still unsolved operational consideration in this system. The practical concept applied in this study will give potential benefits in achieving environmentally sound wastewater treatment as well as environmentally compatible waste disposal in terms of closed substance cycle waste management.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.63-71
• /
• 2009

Recyclable wastes coming into material recovery facilities(MRFs) is mostly packed by plastic bag or sack bag. Bag rupturing device is essential to improve capacity and efficiency of MRFs. Bag opening works of MRFs is mostly done by numerous workers and shredder-type bag rupturing device. It often makes a problems; decreased capacity, shredded recyclables, worker safety by explosion and broken glasses, etc. In the present work, bag rupturing device with octagonal rotating blade drums has been developed to solve the existing problems and environment assessment is also performed during operation of the device. Capacity of the device was about 5.6 ton/hr at 8.2 rpm of drum revolution speed and 1.25 m/min of belt conveyor speed. It satisfied initial designed capacity(5.0 ton/hr) and max. capacity 8.8 ton/hr was achieved at 12.5 rpm of drum revolution speed and 1.50m/min of belt conveyor speed. Bag rupturing efficiencies on outer and inner bag were obtained at 100% and about 95.6% as average, respectively and original form of glass bottles in the bag was maintained without broken by about 96.5%. This result shows that the safety in hand sorting by the workers could be improved. As result of environmental assessment on the noise, vibration and particulates, the measured levels on noise, vibration and particulates show the below standard regulatory limits. It could be concluded that the problems of existing devices in MRFs could be solved by adopting the bag rupturing device with octagonal rotating blade drums in on-site operation.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.317-323
• /
• 2006

This study focused on the availability of wastewater reclamation and reusing system as one of the alternatives against the global water shortage in near future, which system is composed of two treatment steps; first, wastewater is injected into upflow $A^2O$ biofilm process(anaerobic/anoxic/oxic) reactor filled with polyethylene fixed-media, and the effluent of 1st steps continuously passed through downflow nano silver sand filter. The pH of the effluent ranged from 7.39 to 8.06(average 7.84), the $COD_{Mn}$ was $8{\sim}18mg/L$(average 12.1 mg/L), and $BOD_5$ was $2.1{\sim}10.0mg/L$(average 4.9 mg/L), that met all the wastewater reclamation and reusing system criteria. Besides, the SS concentrations of the effluent which was $3{\sim}9mg/L$(average 4.95 mg/L) met the criteria(5 mg/L), showing 94.8% of average removal efficiency. The 99.1% of the average removal efficiency of the E-coliform did not met the criteria(Not detected), which indicates the needs for the following chlorine disinfection treatment with the residual chlorine concentration of above 0.2 mg/L. There are no bacteria on the sand surface coated by nano silver. The removal efficiency of T-N and T-P that could be included into the criteria in the future was 50.3% and 27.2% respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.217-222
• /
• 2009

This study was conducted to search possibilities of the use of sludge from waterworks industry in the manufacturing of red clay bricks. Different compositions of the sludge were added into the raw materials of the bricks and required engineering characteristics of the manufactured bricks were examined. Compressive strength, plasticity, and surface absorption of the recycled bricks were analyzed and were compared with the bricks quality standard rules and regulation for quality assurance of the product. Compressive strength of the bricks made in a ratio 75% clay, 5% sludge and 20% silica was found 261.3 $kg_f/cm^3$ and that was comparable with first grade bricks standard. Compressive strength of the bricks made in a ratio 70% clay, 10% sludge, and 20% silica was found 249.9 $kg_f/cm^3$ while it was decreased to 217.3 $kg_f/cm^3$ when bricks were made in a ratio 65% clay, 15% sludge and 20% silica. However, these values of compressive strength were in agreement with the bricks quality standard. Surface absorption of the bricks made by the mixing of 20% silica with varying amount of sludge, i.e., 5%, 10%, and 20% was found 10%, 9.65% and 10.92% respectively. These values satisfied the quality standard of bricks of grade 1 and 2. Recycling of proper amount of sludge in bricks making could produce bricks of high engineering characteristics.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.73-80
• /
• 2011

The radiation shielding analysis for a Burnup-credit (BUC) cask designed under the management of Korea Radioactive Waste Management Corporation (KRMC) was performed to examine the contribution of each radiation source affecting dose rate distribution around the cask. Various radiation sources, which contain neutron and gamma-ray sources placed in active fuel region and the activation source, and imaginary nuclear fuel were all considered in the MCNP calculation model to realistically simulate the actual situations. It was found that the maximum external and surface dose rates of the spent fuel cask were satisfied with the domestic standards both in normal and accident conditions. In normal condition, the radiation dose rate distribution around the cask was mainly influenced by activation source ($^{60}Co$ radioisotope); in another case, the neutron emitted in active fuel region contributed about 90% to external dose rate at 1m distance from side surface of the cask. Besides, the contribution level of activation source was dramatically increased to the dose rates in top and bottom regions of the cask. From this study, it was recognized that the detailed investigation on the radiation sources should be performed conservatively and accurately in the process of radiation shielding analysis for a BUC cask.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.17-29
• /
• 2012

potential assessment of converting closed non sanitary landfills into sustainable landfill through the reclamation works(= landfill mining project) of illegal landfill discovered in land development site using Sustainable Landfill Reclamation system(SLR-system) was investigated. The SLR system had treatment capacity of 91.4 $m^3/hr$ (130.61 ton/hr) in condition of 28.0% of water content. Recovery ratio and purity of sorted soil were 98.9% and 99.66%, respectively. Sorted combustibles were 91.8% and 92.0%, respectively. Especially, high heating value (HHV) and low heating value(LHV) of combustibles were 4,282kcal/kg and 3,636 kcal/kg, respectively, in considering the energy content and recovery ratio of combustibles. Therefore, combustibles separated from landfill site have higher value than Fluff RDF standard value(3,500kcal/kg) of MOE. RDF can be produced with combustibles by 84.43%. Averaged size and organic foreign matter content of the sorted soil were less than 035mm and 0.31 %(VN), respectively. In addition, concentration of all contents of hazardous matters containing soils met safety standards. Therefore, it is possible to be recycled as refilling and cover materials to rebuild Sustainable landfills by 98.42%.