• The Journal of the Korean dental association
• /
• v.11 no.3
• /
• pp.205-209
• /
• 1973

법랑질과 상아질의 타액단백의 흡착관계를 구명키 위하여 타액을 법랑질과 상아질 분말의 column에 흡착시킨후 증류수, 3M Nacl, 0.1M phosphate buffer, pH 7.1, 0.2M EDTA 함유한 phosphate buffer와 증류수를 차례로 용출시켜 용출액의 amylase, ribonuclease 및 단백양을 관찰한 결과는 다음과 같다. 1. 타액 amylase와 ribonuclease는 법랑질과 상아질 분말에 모두 흡착하였다. 2. 0.2M EDTA가 함유한 buffer에서는 단백양을 법랑질과 상아질분말에서 모두 33.5%정도 용출되었으나 효소활성은 없었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.237-245
• /
• 2000

For the purpose of comparing the bond strengths of some tooth adhesive restoration materials on primary enamel and dentin, 4 kinds (7 brands) of restorative materials including a composite resin (Z 100), a conventional glass ionomer cement (Chem-Flex), 2 brands of resin-modified glass ionomer cements (Fuji II LC-I, Vitremer), and 3 brands of compomers(Dyract AP, F2000, Compoglass) were investigated using UTM for measuring the shear bond strengths. Additionally the failure modes were examined by histologically observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strengths of Z 100 to the primary enamel were higher than those of other experimental materials except Fuji II LC-I, which showed significantly higher bond strength than Chem-Flex or Vitremer (P<0.05). 2. The shear bond strengths of Z 100 to the primary dentin were higher than those of other experimental materials except Dyract AP and Fuji II LC-I, both of which showed significantly higher shear strength than Chem-Flex or Vitremer (P<0.05). 3. The shear bond strengths of all restorative materials except Dyract AP showed relatively higher values to enamel surface than to dentin surface. In Dyract AP, the reverse was true significantly. 4. All materials examined showed cohesive failures except some Chem-Flex and Vitremer, which showed adhesive failures.

• Journal of Oral Medicine and Pain
• /
• v.24 no.4
• /
• pp.411-420
• /
• 1999

과거 수십년간 여러 가지 다른 레이저를 이용한 치아경조직에 대한 몇 가지의 생체외적 실험이 이루어졌다. 그러나 그 결과는 좋지 못하였다. 그러한 주 문제는 열작용이었다. 미국 식품의약국(FDA)에서 사용하도록 허가된 Er:YAG 레이저는 인간의 생체 치아를 삭제할 수 있는 최초의 레이저이다. 치아 삭제가 열작용의 원리에 의해 이루어지기는 하지만, 경조직의 미세폭발에 의하기 때문에 주변의 경조직과 연조직에 미치는 열작용은 거의 없다. 본 연구에서는 최근 국내에서 최초로 개발된 Er:YAG 레이저를 사용하여, 상아질과 법랑질에 일회 조사시 다양한 에너지 수준에 따른 삭제율을 연구하였다. 건조된 10개의 치아가 선택되었으며, 각각은 에폭시 레진에 포매되어 경화되었다. 그 후 다섯 개의 치아는 저속회전 다이아몬드 휠로써 교합면 삭제를 통해 상아질이 노출되었으며, 나머지 다섯 개의 치아는 협측 혹은 설측을 삭제하여 평평한 표면의 법랑질을 만들도록 하였다. 준비된 상아질과 법랑질 치아의 표면은 각각의 에너지 수준의 레이저를 조사할 6개의 구획으로 나누어 표본으로 삼았다. 상아질과 법랑질 표본은 에너지 수준에 따른 5개의 실험군(40 mJ, 80 mJ, 120 mJ, 160 mJ, 200 mJ)으로 나누어 그 삭제율을 분석하였다. 삭제된 부피는 삼차원 영상 표면분석기로 측정하였으며, 통계적으로 분석하였으며, 그 결과는 다음과 같다. 1. 상아질과 법랑질간의 삭제율의 차이는 통계적으로 유의한 차이가 있었다(p<0.0001). 2. 에너지 수준에 따른 삭제율의 차이는 통계적으로 유의한 차이가 있었다(p<0.0001). 3. 각각의 에너지 수준에서 상아질과 법랑질간의 삭제율의 차이는 통계적으로 유의한 차이가 있었으나(p<0.05), 40 mJ과 80 mJ에서는 유의한 차이를 보이지 않았다. 4. 상아질에서 각각의 에너지 수준 간의 삭제율이 유의한 차이를 보였으나(p<0.01), 160 mJ과 200 mJ간에는 삭제율의 유의한 차이가 없었으며, 법랑질에서도 각각의 에너지 수준 간의 삭제율이 유의한 차이를 보였으나(p<0.01), 120 mJ, 160 mJ, 200 mJ 간에 유의한 차이를 보이지 않았다. 본 연구에서는 건조된 치아에 다양한 에너지 수준의 Er:YAG 레이저를 적용했을 경우 상아질과 법랑질의 삭제 부피를 연구하여 정량화 및 통계적 분석을 하였다. 그 결과, Er:YAG 레이저는 치아경조직의 삭제에 매우 유용하였으며, 앞으로도 이를 임상적으로 널리 이용하기까지 좀더 다양하고 심화된 연구가 필요할 것으로 사료된다.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.165-174
• /
• 1995

The purpose of this study was to evaluated the improve method of demineralization and damage on the enamel stufece related to bonded orthodontic bracket. Enamel surface of the 40 Intact premolars were treated by aicd etching and various fluoride application methods and then maintained in the patient mouth of 3 months. After extraction of all the sampled premolars, enamel surfaces were evaluated by Scanning electron microscope. The obtained results were as follow. 1. Enamel surface relate to bonded orthodontic bracket showed demineralization and damage, slightly. 2. Group 6 treated by $2\%$ NaF iontophoresis presented and almost similarity to nomral enamel surface. 3. Group 2 treated by acid etching had demineralization and damage on the enamel surface much more than other groups treated by various fluoride application methods. 4. Demineralization and damage on the enamel surface caused by bonded orthodontic bracket is improved by various fluoride application methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.301-307
• /
• 2010

Purpose: The objectives of the current study are to assess the accuracy of X-Ray Micro Computed Tomography (microCT) in measuring enamel thickness and to evaluate enamel thickness in maxillary incisors of Koreans. Materials and methods: Five maxillary incisors were embedded in resin block. These teeth were longitudinally sectioned labiolingually through the medial axis. After polishing, the teeth were scanned using a microCT (X-EYE SYSTEM; DRGEM, Seoul, Korea). On a scanning electron microscope (S-4300; Hitachi, Tokyo, Japan) (${\times}20$) and a microCT, nearly identical planes were reconstructed. In each tooth, the thickness of labial enamel was measured 1, 3 and 5 mm above the cementoenamel junction (CEJ). Thus, the accuracy of the microCT was evaluated. In addition, using 26 maxillary central incisors and 11 maxillary lateral incisors, in the medial axis and 2 mm remote areas mesially and distally from the medial axis, the thickness of labial enamel was measured 1, 3 and 5 mm above the CEJ along the long axis of the teeth. Results: Measurements from nearly identical planes in physical and microCT sections differed by 3.81%. An independent t-test was performed and this showed that there were no significant differences in the measurements between the two methods. Mean values of labial enamel thickness in maxillary central incisors 1, 3 and 5 mm above the CEJ were $0.32{\pm}0.01$, $0.50{\pm}0.0.2$ and $0.70{\pm}0.02\;mm$, respectively. Mean values of labial enamel thickness in maxillary lateral incisors 1, 3 and 5 mm above the CEJ were $0.30{\pm}0.01$, $0.55{\pm}0.03$ and $0.80{\pm}0.02\;mm$, respectively. Conclusion: In measuring enamel thickness, microCT is one of useful way of measurement. So according to the results of this research, when restoring a porcelain laminate veneer on maxillary incisors in Koreans, careful consideration is needed in the amount of enamel reduction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.266-276
• /
• 2020

The purpose of this study was to compare the remineralization effect of 38% silver diamine fluoride (SDF) and 5% sodium fluoride (NaF) varnish on artificially induced enamel caries. The present study standardized the physiochemical characteristics of the tooth structure using bovine teeth, realized the wash-off action of agents using a saliva, reproduced an environment similar to mouth through pH-cycling, and comparatively assessed the remineralization effect of 38% SDF and 5% NaF varnish in a non-destructive method using micro-CT. And the remineralized enamel surface structure was analyzed by scanning electron microscopy (SEM) and energy dispersive X-Ray spectroscopy (EDS). In both SDF and NaF varnish, mineral density (△Hounsfield unit value) and the volume of enamel restored to normal mineral density through remineralization gradually increased with time. And the SDF showed a much higher level of increase in mineral density at all depths and remineralized volume than NaF varnish. According to SEM analysis, the surface roughness decreased in the order of artificial saliva, NaF varnish and SDF. In addition, EDS analysis showed that silver ion was precipitated on the enamel surface in SDF group. In conclusion, SDF had a greater remineralization effect than NaF varnish on demineralized enamel.

• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.184-190
• /
• 2011

Objective: The purpose of this study was to investigate the relationship between the enamel thickness of proximal surfaces and the morphologic features of mandibular incisors. Methods: Mesiodistal/faciolingual (MD/FL) index, MD width, and height of contour width/cervical width ratio were measured in 40 incisors extracted from Koreans. For determining the height of contour width/cervical width ratio, the cervical width was measured as the distance between proximal cementoenamel junctions. Then, the labial surface was ground to the height of the contour level to measure enamel thickness. Pearson correlation analysis was used to investigate the correlation between enamel thickness and morphologic features. Results: Enamel thickness was $0.75{\pm}0.07mm$ per side, and MD width was $5.56{\pm}0.40mm$. Enamel thickness and MD width were significantly correlated. However, a significant relationship was not observed between enamel thickness and MD/FL index or the height of contour width/cervical width ratio. Conclusions: The results suggest that enamel thickness is affected only by MD width. Therefore, if the MD width is the same for mandibular incisors with a large MD/FL index or triangular shape and mandibular incisors with normal shape, then the limit of enamel reduction for reproximation will be the same.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.562-570
• /
• 2008

Amelogenesis imperfecta is a group of hereditary defects of enamel, unassociated with any other generalized defects. It is classified into 14 subtypes according to different clinical and genetic features. According to its clinical features, it is classified into hypoplastic type, hypocalcified type and hypomaturation type. However, these features tend to co-exist often. Dental features associated with amelogenesis imperfecta include quantitative and qualitative enamel deficiencies, pulpal calcification, root malformations, abnormal eruption, impaction of permanent teeth, progressive resorption of root and crown, congenital missing teeth and anterior and posterior open bite occlusions. The first case patient is a 16 month-old child with discoloration of deciduous teeth. All of her deciduous and permanent dentition has shown amelogenesis imperfecta. The restorational, orthodontic and recent prosthodontic treatments have been completed. Another patient is a 9 year and 3 month-old child with amelogenesis imperfecta in both deciduous and permanent dentition. The restoration has been done and the prosthodontic treatment is planned after the completion of growth. Above cases indicate that amelogenesis imperfecta occurs both in deciduous and permanent dentition, and it requires the long term treatment and care.

• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.477-482
• /
• 2011

Objectives: The purpose of this study was to compare the microshear bond strength (uSBS) to enamel prepared with different burs and to determine what type of bur were chosen when a self-etching primer adhesive was used. Materials and Methods: Enamel of forty-two human molars were used. They were divided into one of six groups (n = 7), Group 1, coarse (125 - 150 ${\mu}m$) diamond bur; Group 2, standard (106 - 125 ${\mu}m$) diamond bur; Group 3, fine (53 - 63 ${\mu}m$) diamond bur; Group 4, extrafine (20 - 30 ${\mu}m$) diamond bur; Group 5, plaincut carbide bur (no. 245); Group 6, cross-cut carbide bur (no. 557). Clearfil SE Bond and Clearfil AP-X (Kuraray Medical Inc.) was bonded to enamel surface. The bonded specimens were subjected to uSBS testing. Results: The uSBS of Group 4 was the highest among groups and it was significantly higher than that of Groups 1, 2, 3, and 6 (p < 0.05), but it was not significantly different from that of Group 5. Conclusions: Different burs used on enamel surface affected the microshear bond strengths of a self-etching primer adhesive to the enamel surface. In the case of Clearfil SE Bond, extrafine diamond and plain-cut carbide bur are recommended for bonding to enamel.

• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2000.09a
• /
• pp.27-27
• /
• 2000

랫드의 치아에서 발생하는 종양에는 에니멜모세포종 (ameloblastoma), 에나멜모세포성 치아종 (ameloblastic odontoma), 치아종 (odontoma) 이 있다 . 에나멜모세포종은 상피종양으로서 법랑질(enamel), 상아질 (dentin) , 시멘트질 (cementum) 을 형성하지 않는다 . 대부분의 에나멜모세포종은 소포성 (follicular) 성장이나 얼기상 (plexiform) 성장방식을 띠게 된다. 에나멜모세포성 치아종(ameloblastic odontoma) 은 치조직 종양으로서 에나멜모세포종 같이 연조직으로 된 부분과 치아종 (odontoma) 처럼 상아질, 법랑질, 시멘트질과 같은 단단한 부분으로 구성되어 있다. (중략)