• 제목/요약/키워드: 번 아웃

검색결과 33건 처리시간 0.025초

MOC: 다중 오브젝트 클러스터링을 통한 BSD VM의 페이지-아웃 성능 향상 (MOC: A Multiple-Object Clustering Scheme for High Performance of Page-out in BSD VM)

  • 양종철;안우현;오재원
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제36권6호
    • /
    • pp.476-487
    • /
    • 2009
  • BSD 가상 메모리 시스템(BSD VM)은 페이지-아웃 시 디스크 I/O 횟수를 줄이기 위해 클러스터링 기법을 사용한다. 이 기법은 페이지-아웃 대상 페이지와 가상 메모리 공간에서 인접한 변경 페이지들을 그 대상 페이지와 함께 클러스터(그룹)를 만들어 한 번의 디스크 I/O로 디스크에 저장한다. 하지만 응용 프로그램이 가상 메모리 공간에서 서로 인접하지 않은 다수의 페이지들을 변경하면 클러스터들의 크기가 작아져 클러스터링의 효과가 감소된다. 이 문제점을 해결하기 위해 본 논문에서는 Multiple-Object Clustering(MOC) 기법을 제안한다. MOC는 클러스터별로 디스크 I/O를 하는 대신 여러 클러스터들을 모아 단일 디스크 쓰기로 페이지-아웃시킨다. 따라서 이 페치지-아웃 방식은 디스크 I/O 횟수를 감소시켜 시스틴 성능을 크게 향상시킨다. MOC는 성능 검증을 위해 FreeBSD 6.2 운영체제 커널에서 구현되었다. NS2, Scimark2 SOR, nbench LU 벤치마크를 통한 MOC 성능 측정 결과 기존 BSD VM보다 MOC의 실행 씨간이 9~45% 단축되었다.

DPT를 위한 자동 레이아웃 분리 (Automatic Layout Decomposition for DPT)

  • 문동선;신현철;신재필
    • 대한전자공학회논문지SD
    • /
    • 제45권4호
    • /
    • pp.124-130
    • /
    • 2008
  • Double patterning technology (DPT)를 위한 자동 레이아웃 분리 기술을 개발하였다 CMOS 공정이 45nm와 그 이하로 점차 미세화 됨에 따라 리소그래피 해상도를 향상시키는 기술이 요구되고 있다. 최소 거리 규칙을 완화하기 위해 두 개의 마스크로 레이아웃을 나누어 두 번 패터닝 하는 DPT 기술이 기존 리소그래피의 제한을 해소하기 위해 제안되었다. 그러나 레이아웃을 DPT에 적합하게 두 개의 마스크로 나누는 것은 항상 가능하지 않다. 이러한 문제를 해결하기 위해 새로운 자동 스티칭 기술을 개발하였다. 실험 결과는 본 논문에서 제안한 DPT를 위한 자동 레이아웃 분리 방법이 고무적임을 보여준다.

다중 채널 인증 기반 보안 카드의 설계 및 구현 (Multi-Channel Authentication based Security Card Design and Implementation)

  • 서화정;김호원
    • 한국정보통신학회논문지
    • /
    • 제20권1호
    • /
    • pp.81-86
    • /
    • 2016
  • 본 논문에서는 다중 채널 보안카드 설계 기법을 제공한다. 해당 보안 카드는 투명하게 제작되어 스마트폰의 화면과 합쳐서 나타나는 정보를 통해 비밀값을 도출하게 된다. 이는 기존 보안카드가 가지는 레이아웃의 물리적인 한계를 제거하여 보안카드가 가지는 복잡도를 향상시켰으며 1채널 보안카드의 단점인 물리적 노출에 대한 취약점을 다중 채널로 확장하여 한 번의 물리적 보안카드의 노출이 모든 비밀 정보의 노출로 연결되는 문제점도 해결하였다.

흰열이 있는 전열면의 R-113에서의 비등열전달에 관한 연구 (A Study on the Boiling Heat Transfer of Heat Surface with Fin Array to R-113)

  • 조시기
    • 설비공학논문집
    • /
    • 제13권6호
    • /
    • pp.440-447
    • /
    • 2001
  • This study investigate experimentally the effect of in height, thickness, and clearance on the boiling heat transfer. The heat surfaces having copper fin array is tested for pool boiling. The gas-liquid exchange interference is investigated based on fin array clearance. These test results can be applied to the design of tube bundle system. The fin height of 2 mm is found to be effective. Effects of heat transfer promotion reaches the highest level when the fin clearance is 0.5mm. Also, heat flux is increased when the fin thickness is smaller. But0.2 mm fin thickness is highly recommended.

  • PDF

Special Theme - 클라우드 컴퓨팅 - ICT Expert Interview

  • 허의남
    • TTA 저널
    • /
    • 통권139호
    • /
    • pp.40-43
    • /
    • 2012
  • 주로 컴퓨터 자원(Platform, HDD, CPU)의 가상화를 통한 IT 인프라 관리 및 아웃소싱의 효율성을 추구하던 클라우드 컴퓨팅이 이제는 다양한 서비스 분야로 전환되고 있다. 심지어 사용자의 개인 데이터, 홈 가전기기, 헬스 기기 등의 모든 디지털화된 IT 자원이 스마트 폰, 태블릿 PC, IP-TV 중심의 N-Screen 등의 사용자 단말 기술들과 연계 및 진화하여 더욱 편리한 디지털 라이프의 변화를 주도하고 있다. 따라서 본 특집에서는 더욱 발전하는 클라우드 컴퓨팅의 주요 분야들 - 모바일 클라우드, DaaS(Desktop as a Service: 데스크톱 클라우드), 공공 부문의 SLA(Service Level Agreement), 퍼스널 클라우드 보안과 프라이버시 - 대해 기술적 동향과 이슈 등을 고찰하고자 한다. 특히 작금의 국제적 표준화가 ITU-T, ISO에서 조직과 체계를 구체적으로 마련하고 2012년부터는 본격적인 경쟁에 들어가는 중요한 시대적 위치에 있으므로 본 특집을 통해 국내 연구자 및 개발자들에게 표준화된 기술 및 서비스 개발에 동기를 부여하고자 한다. 본 특집을 기획하면서 클라우드 컴퓨팅은 IT의 인프라에서 응용까지 연계되어 서비스 산업의 좋은 모델로서 국가적 경쟁력을 끌어올릴 수 있는 중요한 기술임이 자명하며, 단기적으로 끝나는 기술이 아님을 다시 한 번 확인할 수 있는 좋은 기회로 산업의 많은 분야에 뿌리 깊이 내려지길 기대해 본다. 이를 위해 기업과 국가의 지속적인 개발과 지원에 대한 결정이 그 어느 때보다 필요하다.

  • PDF

일 직장인의 일주기 유형이 번아웃에 미치는 영향: 우울과 스트레스 반응의 매개 효과 연구 (The Effect of Chronotype on Burnout among Shift and Non-Shift Workers: Mediation Effect of Depression and Stress Response Study)

  • 강상구;최서현;이채원;이상은;맹세리;손지성;김혜영;배재남;이정섭;김원형
    • 생물정신의학
    • /
    • 제27권2호
    • /
    • pp.84-93
    • /
    • 2020
  • Objectives The purpose of the present study was to examine the relationship between the chronotype and the burnout, so we investigated the mediating effects of the mediators such as perceived stress, stress response, and depression. Methods Employees working at Incheon Customs conducted a mental health self-examination through the internet. Among them, 174 people who agreed to the mental health survey participated in the study. Participants completed questionnaires including Composite Scale of Morningness (CSM), Center for Epidemiological Studies-Depression Scale (CES-D), Perceived Stress Scale (PSS), Stress Response Inventory (SRI), Maslach Burnout Inventory-General Survey (MBI-GS). Results Our results showed a higher degree of CES-D, SRI, exhaustion, and cynicism in evening and intermediate type compared to morning type, and a higher degree of professional efficacy in morning type compared to intermediate type. CSM was shown to have a direct effect on exhaustion and indirect effect through CES-D and SRI. CSM also had a direct effect on professional efficacy and had an indirect effect through the CES-D. However, CSM was found to have only indirect effects through the SRI for Cynicism. Conclusions In this study, individuals with evening type tend to experience a high degree of burnout (exhaustion, cynicism and professional efficacy) through the mediation effect of depression and stress response. Further study is necessary to reveal the effect of management of the depression and stress response in the employee with evening type.

충돌수분류(衝突水噴流)에 의한 서브쿨 Burnout열류속(熱流束)에 관한 연구 (Subcooled Burnout Heat Flux on a Heated Surface with Impinging Water Jet)

  • 엄기찬;이종수;박성연
    • 설비공학논문집
    • /
    • 제8권4호
    • /
    • pp.527-536
    • /
    • 1996
  • Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.

  • PDF

온라인 진화형 TSK 퍼지 식별 (Online Evolving TSK fuzzy identification)

  • 김경중;박창우;김은태;박민용
    • 한국지능시스템학회논문지
    • /
    • 제15권2호
    • /
    • pp.204-210
    • /
    • 2005
  • 본 논문에서는 TSK 퍼지 모델을 위한 온라인 식별 알고리즘을 제안한다. 제안된 알고리즘은 거리를 이용하여 TSK 퍼지 모델에 대한 전건부의 구조를 식별하고, 재귀적 최소자승법으로 후건부를 구성하는 부분 선형 함수들의 매개 변수를 구한다. 대부분의 다른 연구들에서는 전건부의 구조를 구하기 위해서 클러스터링을 수행할 때 입력 공간에서만 고려하였으나. 제안된 알고리즘에서는 입력 공간 및 출력 공간 모두에서 고려하여, 아웃라이어를 효과적으로 배제할 수 있다. 기존의 대부분의 다른 알고리즘에서 샘플 데이터자체를 클러스터의 중심으로 사용하여 잡음에 민감한 단점이 있었으나, 제안된 알고리즘에서는 데이터 자체를 클러스터의 중심으로 사용하지 않아 잡음에 대해 민감하지 않다. 제안된 알고리즘은 많은 데이터의 저장을 필요로 하지 않고, 한 번 통과함으로써 모델을 구할 수 있다.

탄화가공시 면/폴리에스터 교직물의 물성 (The Physical Properties of Cotton/Polyester Fiber Mixed Fabrics in Burn Out Finishing)

  • 김수미;송화순
    • 한국의류학회지
    • /
    • 제28권1호
    • /
    • pp.131-142
    • /
    • 2004
  • When the cotton/polyester fiber mixed fabrics were treated with ferrous sulfate and oxalic acid for burn out finishing, it was examined how the effects of process conditions as concentration of burn out agents, temperature, time and pressure act onto the properties of polyester ground fabrics. The results are as follows. The effect of burn out finishing by pressure was greated in 3 kgf/$\textrm{cm}^2$. The properties as white index and tensile strength of polyester ground fabrics were decreased according as processing concentration, temperature time increases. The shrinkage was increased according as processing concentration, temperature time increases. The optimum condition of burn out agents to ferrous sulfate was 30% concentration, 150$^{\circ}C$, 1 min, 3 kgf/$\textrm{cm}^2$ and to oxalic acid was 10% concentration, 110$^{\circ}C$, 1min, 3 kgf/$\textrm{cm}^2$. And the optimum of ferrous sulfate and oxalic acid used in combination was 10% ferrous sulfate and 7% oxalic acid, 110$^{\circ}C$, 1 min., 3 kgf/$\textrm{cm}^2$.

작업 파이프라이닝을 위한 그리드 워크플로우 스케줄러 설계 (Design of Grid Workflow System Scheduler for Task Pipelining)

  • 이인선
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권7호
    • /
    • pp.1-10
    • /
    • 2010
  • 워크플로우 관리자는 대량의 계산용 그리드 자원을 데스크탑 컴퓨터에서 개인이 편리하게 워크플로우를 만들고 수행할 수 있게 해주는 유용한 도구이다. 보통 데이터는 스테이지-인, 프로세스, 스테이지-아웃의 순서로 순차적으로 진행되며 워크플로우 시스템은 이 과정을 자동화해준다. 그러나 최근의 e-science에서는 사용되는 데이터 량이 급속하게 증가하고 있고 원하는 출력물을 얻기 위해 여러 번의 과정을 수행하면서 데이터 이동 시간이 전체 수행시간의 많은 부분을 차지하게 되어 스테이징 과정의 개선이 중요한 이슈가 되고 있다. 본 논문에서는 스테이징 과정을 개선하고, 이를 이용하여 가능한 한 많은 작업들을 동시 수행시키는 스케줄러를 설계하였다. 또한 모의실험을 통해 제안한 스케줄러의 성능이 10~40%까지 향상됨을 보였다.