This study was intended to investigate the influences that consumer's price sensitivity, bundle discount type, and price level of the male cosmetics have on consumer attitude. The design of this research was comprised of $2{\times}2{\times}2$ mixed design studies. The first element was high price sensitivity vs. low sensitivity, the second element was the bundle discount type (mixed leader vs. mixed-joint), and the third element was the price level of male cosmetics (high-price brand vs. low-price brand). The results of this study showed that price sensitivity, bundle discount type and price level of male cosmetic had a statistically significant interaction effect on the consumer's quality perception. The quality perception of low-cost brands for high price sensitivity/mixed-joint bundle group was low. The quality perception of low-cost brands for mixed-leader bundled groups did not change significantly even when the price sensitivity became higher. However, it can be seen as the same result that the overall value is higher when suggested the price information in Mixed-leader bundle than Mixed-joint bundle. In particular, this study suggests that price information should be presented in mixed-leader bundles for high price sensitivity and low cast brands.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2005.10a
/
pp.393-397
/
2005
A process map has been developed, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion fur pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.
Purpose: The purpose of this study was to evaluate the effectiveness of a ventilator-associated pneumonia (VAP) bundle. Methods: This was a retrospective study that was carried out between June 2010 and October 2015. In this study, 3,224 intubated patients were included. The VAP bundle which was applied to Group 1 patients (n=470) included head-of-bed elevation to 30 degrees, cuff pressure monitorization, prophylaxis of peptic ulcer, and prophylaxis of deep vein thrombosis. The VAP bundle for Group 2 patients (n=1,914) included all the elements of the VAP bundle for Group 1 patients and one additional element which was oral care with 0.12% chlorhexidine. The VAP bundle for Group 3 patients (n=870) added sedative interruption and assessment of readiness to extubate to the VAP bundle for Group 2. Results: The numbers and incidences of VAP were significantly different among the three groups. Moreover, there were significant differences among groups in ICU length of stay and mortality. Conclusion: Three different VAP prevention bundles made different effects in patient outcomes.
KSCE Journal of Civil and Environmental Engineering Research
/
v.7
no.4
/
pp.125-132
/
1987
The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.
Proceedings of the Korea Contents Association Conference
/
2008.05a
/
pp.583-586
/
2008
RFID technology of Ubiquitous core technology was used the local parts of Traceability System in past, but the various parts of u-Healthcare, Home networks, Telematics, and etc. in today on the one hand, according to be interested in the home networks technology and develope it, we are searching about how to apply RFID technology in home networks. This paper is designed and implemented the system delivered tag information to the application of home networks and controled RFID reader remotely by the bundle implemented RFID reader process methods based OSGi framework platforms.
Kim, Sung Hyun;Jeon, Jae-hwan;Oh, Am-suk;Kang, Sung-in;Kim, Gwan-hyung;Kwon, Oh-hyun;Choi, Sung-wook
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2009.10a
/
pp.237-240
/
2009
In this paper study is to present a framework for sharing medical information. information is generated on the basis of HL7 Messaging standards and shared between, message design on the Implementation of Medical Inform Based on HL7. Effective management control bundled with other devices.
Constructing attractive bundle offers depends on more than an understanding of the distribution of consumer preferences. Consumers are also sensitive to the framing of price information in a bundle offer. In classical economic theory, consumers' utility should not change as long as the total price paid stays same. However, even when total prices are identical, consumers' preferences toward a bundle product could be different depending on the format of price presentation and the locus of price discount. A weighted additive model predicts that the impact of a price discount on the overall evaluation of the bundle will be greater when the discount is assigned to the more important product in the bundle(Yadav 1995). Meanwhile, a reference dependent model asserts that it is better to assign a price discount to a tie-in component that has a negative valuation at its current offer price than to a focal product that has a positive valuation at its current offer price(Janiszewski and Cunha 2004). This paper has expanded previous research regarding price discount presentation format, investigating the reasons for mixed results of prior research and presenting new mechanisms for price discount framing effect. Prior research has hypothesized that bundling is used to sell a tie-in component with an offer price above the consumer's reference price plus a focal product of the same offer price with reference price(e.g., Janiszewski and Cunha 2004). However, this study suggests that bundling strategy can be used for increasing product's attractiveness through the synergy between components even when offer prices of bundle components are the same with reference prices. In this context, this study employed various realistic bundle sets with same price between offer price and reference price in the experiment. Hamilton and Srivastava(2008) demonstrated that when evaluating different partitions of the same total price, consumers prefer partitions in which the price of the high-benefit component is higher. This study determined that their mechanism can be applied to price discount presentation formats. This study hypothesized that price discount framing effect depends not on the negative perception of tie-in component with offer price above reference price but rather on the consumers' perceived consumption benefit in bundle product. This research also hypothesized that preference for low-benefit discount mechanism is that perceived consumption benefit reduces price sensitivity. Furthermore, this study investigated how consumers' concern for quality in a price discount--a factor not considered in previous research--influences price discount framing. Yadav(1995)'s experiment used only one magazine bundle of relatively low quality uncertainty and could not show the influence of perceived uncertainty of quality. This study assumed that as perceived uncertainty of quality increases, the price sensitivity mechanism for assigning the discount to low-benefit will increase. Further, this research investigated the moderating effect of uncertainty of quality in price discount framing. The results of the experiment showed that when evaluating different partitions of the same total price and the same amount of discounts, the partition that discounts in the price of low benefit component is preferred to the partition that decreases the price of high benefit component. This implies that price discount framing effect depends on the perceived consumption benefit. The results also demonstrated that consumers are more price sensitive to low benefit component and less price sensitive to high benefit component. Furthermore, the results showed that the influence of price discount presentation format on the evaluation of bundle product varies with the perceived uncertainty of quality in high consumption benefit. As perceived uncertainty of quality gradually increases, the preference for discounts in the price of low consumption benefit decreases. Besides, the results demonstrate that as perceived uncertainty of quality gradually increases, the effect of price sensitivity in consumption benefit also increases. This paper integrated prior research by using a new mechanism of perceived consumption benefit and moderating effect of perceived quality uncertainty, thus providing a clearer explanation for price discount framing effect.
This study is a study on effective stitching technique for video recorded by using a dual-lens $360^{\circ}$ camera composed of two fisheye lenses. First of all, this study located a problem in the result of stitching by using a bundled program. And the study was carried out, focusing on looking for a stitching technique more efficient and closer to perfect by comparatively analyzing the results of stitching by using Autopano Video Pro and Autopano Giga, professional stitching program. As a result, it was shown that the problems of bundled program were horizontal and vertical distortion, exposure and color mismatch and unsmooth stitching line. And it was possible to solve the problem of the horizontal and vertical by using Automatic Horizon and Verticals Tool of Autopano Video Pro and Autopano Giga, problem of exposure and color by using Levels, Color and Edit Color Anchors and problem of stitching line by using Mask function. Based on this study, it is to be hoped that $360^{\circ}$ VR video content closer to perfect can be produced by efficient stitching technique for video recorded by using dual-lens $360^{\circ}$ camera in the future.
Commercial Unmanned Aerial Vehicle (UAV) image processing software products currently used in the industry provides camera calibration information and block bundle adjustment accuracy. However, they provide mapping accuracy achievable out of input UAV images. In this paper, the quality of mapping is calculated by using orientation parameters from UAV image processing software. We apply the orientation parameters to the digital photogrammetric workstation (DPW) for verifying the reliability of the mapping quality calculated. The quality of mapping accuracy was defined as three types of accuracy: Y-parallax, relative model and absolute model accuracy. The Y-parallax is an accuracy capable of determining stereo viewing between stereo pairs. The Relative model accuracy is the relative bundle adjustment accuracy between stereo pairs on the model coordinates system. The absolute model accuracy is the bundle adjustment accuracy on the absolute coordinate system. For the experimental data, we used 723 images of GSD 5 cm obtained from the rotary wing UAV over an urban area and analyzed the accuracy of mapping quality. The quality of the relative model accuracy predicted by the proposed technique and the maximum error observed from the DPW showed precise results with less than 0.11 m. Similarly, the maximum error of the absolute model accuracy predicted by the proposed technique was less than 0.16 m.
Proceedings of the Korean Fiber Society Conference
/
2003.04a
/
pp.394-395
/
2003
絲(bundle)와 구성섬유(fiber)간의 인장물성 관계를 규명하기 위한 연구는 오래전부터 계속되어 왔다[1-4]. 그러나, 과거의 연구들은 주로 면사와 같은 단섬유(short staple)를 중심으로 이루어졌으며, 합성섬유와 같은 장섬유(continuous filament)의 경우 불균제가 작다는 이유로 스테이플에 비해 소홀시 되어왔다. 조사에 의하면 합성섬유도 생산국 및 제조사에 따른 絲의 인장물성은 큰 차이를 나타내므로[5], 필라멘트의 인장물성에 대한 연구의 중요성도 간과할 수 없다. (중략)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.