• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.105-107
• /
• 1999

최근 자동차 수의 급속한 증가와 대중 교통의 발달로 인하여 ITS(Intelligent Transportation System)과 같은 지리/교통 안내 시스템의 연구 개발이 활발히 이루어지고 있다. 이러한 시스템의 중요한 기능 중의 하나로 대중 교통의 관리와 안내 서비스가 있다. 특히 우리나라의 경우 아직 많은 사람들이 대중 교통을 이용하고 있고, 대중 교통이 대도시 교통체증의 중요 해결책으로 인식되므로 이러한 기능이 더욱 필요하다. 본 논문에서는 인터넷을 통하여 접근할 수 있는 버스 노선 안내 서비스 시스템을 개발한 경험을 소개한다. 버스 노선 안내 서비스 시스템은 사용자가 접근하기 용이해야 하며 실용적인 서비스 결과를 제공할 수 있어야 한다. 또한 추후 개발되는 여러 ITS 구성 요소들과 유기적으로 결합할 수 있는 상호 운용성이 필요하다. 본 논문에서는 분산 객체 미들웨어의 표준인 CORBA를 이용하여 인터넷을 통한 접근이 용이하고 상호 운용성이 뛰어난 시스템 구조를 제안하였다. 이 시스템의 구조와 스키마는 추후 다른 대중 교통 안내 서비스 시스템과의 연계 혹은 다른 ITS 구성 요소와의 연계에 쉽게 대응할 수 있을 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.617-625
• /
• 2008

In low-density areas where travel pattern is widely dispersed and travel demand is relatively low, transit operators find it very difficult to provide a reasonable level of service at a reasonable cost. Timed-transfer system or network, if designed properly, can provide a reasonable level of service for passengers using transit systems serving low-density areas. The paper intends to apply a timed-transfer system for bus lines serving Yangsan City area and to assess the effects resulted from the application. The concept of a timed-transfer network/system is briefly described, and the present conditions of bus systems in Yangsan City area are discussed, focusing on the aspects of network type and the related problems. The bus timed-transfer network for the area is then developed by adjusting the existing routes and network with the consideration of travel time, route alignments, headways and transfer centers. One must note that developing a timed-transfer network presumes that network and schedule should be developed together. The effects of the developed time-transfer system on the passengers and operators are found substantially so as to justify its introduction to the City. The results of this study will be of considerable use for planners to design the transit systems in low density areas, where in general travel activities are widely dispersed and travel demands are low, so that provision of good quality of transit services are difficult.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2017

This study proposes an integrated accessibility measurement algorithm, which is applied to the Seoul Metropolitan public transportation system consisting of bus and subway networks, and analyzes the result. We construct a public transportation network graph linking bus-subway networks and take the time distance as the link weight in the graph. We develop a time-distance algorithm to measure the time distance between each pair of transit stations based on the T-card transaction database. The average travel time between nodes has been computed via the shortest-path algorithm applied to the time-distance matrix, which is obtained from the average speed of each transit route in the T-card transaction database. Here the walking time between nodes is also taken into account if walking is involved. The integrated time-distance accessibility of each node in the Seoul Metropolitan public transportation system has been computed from the T-card data of 2013. We make a comparison between the results and those of the bus system and of the subway system, and analyze the spatial patterns. This study is the first attempt to measure the integrated time-distance accessibility for the Seoul Metropolitan public transportation system consisting of 16,277 nodes with 600 bus routes and 16 subway lines.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.43-54
• /
• 2010

In order to improve the existing evaluation system of bus services and gain more reasonable analysis outputs, the authors evaluate the efficiency of 113 arterial bus routes in Seoul in 2009 using a modified BCC model considering not only desirable outputs but also undesirable outputs. Each Decision Making Unit (DMU) is assumed to use inputs such as possession costs, operating costs, the ratios of median bus stops overlapped route lengths to produce estimates of desirable outputs (the number of passengers and service satisfaction score) and undesirable outputs (CO2 emissions). According to the analysis, the modified BCC model considering both desirable outputs and undesirable outputs shows more appropriate results. DMUs would be more efficient on average to reduce nearly 10% of the 3 inputs (possession costs, operating costs, and overlapped route lengths) and increase by about 160% the ratios of median bus stops. Also, a Tobit regression analysis is conducted to identify the most effective variables for maximum efficiency and discover that the variable of possession costs and the ratios of median bus stops are statistically significant.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.5
• /
• pp.45-54
• /
• 2011

Currently various applications related to bus route are used on smart devices to obtain bus arrival times, and route information. However, applications are unable to provide various ways for users to provide their destination. This study has designed an algorithm based on user's six patterns. An Android application and a server that communicate with each other have been based on the algorithm. The applications and the server use the Google Maps service and location-based information to provide users with possible routes from the starting place to the destination. They also provide user's with users' current position and any transfer information. They provide practical and efficient information, and are easy to use.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.49-58
• /
• 2009

Four alternative plans for the bus network in Daejeon metropolitan city, which have different hierarchical structure, were proposed : Alternative 1 represents a bus network without hierarchical structure, and Alternative 2, 3, and 4 represent bus networks with primary, intermediate, and advanced hierarchical structures, respectively. Efficiency of the alternative plans were evaluated based on the evaluation index including travel time cost, waiting time cost, and transition penalty cost. The travel time cost was decreased as the level of hierarchical structure gets higher until it reaches the extremely high level. As the level of hierarchical structure get higher, the waiting time cost significantly decreased while the transition penalty cost increased. Collectively, a bus network with hierarchical structure was shown to be more efficient than without it in the light of total travel cost. For the bus network with hierarchical structure, total travel cost shows a concave curve, which implies that there exists an optimal level of hierarchical structure in a bus network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2017

The accurate forecasting of the public transportation's transit and arrival time has become increasingly important as more people use buses and subways instead of personal vehicles under the government's public transportation promotion policy. Using bus management system (BMS) data, which provide information on the real-time bus location, operation interval, and operation history, it is now possible to analyze the bus schedule reliability. However, the punctuality should always be considered together with the operation safety. Therefore, this study suggests a new methodology to secure both reliability and safety using the BMS data. Unlike other studies, we calculated the bus travel time between two bus stops by dividing the total travel length into 6 sections using 5 different measuring points. In addition, the optimal travel time for each bus route was proposed by analyzing the mean, standard deviation and coefficient of variation of the each section's measurement. This will ensure the reliability, safety and mobility of the bus operation.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.145-155
• /
• 2012

At present, Seoul City is putting the bus exclusive lane system into practice according to mass transit revitalization policy. Starting with the installation of roadside bus exclusive lane in the past, at present, even the road sections for central- lane bus exclusive lane system are on the increase. The purpose of this research is to analyze the factors giving impacts on bus accident on central bus exclusive lane and roadside bus exclusive lane. In case of the central bus exclusive lane, the 6 variables, such as the number of bus routes, number of access & entrance to central lanes patterns, whether the stop line of central lanes retreats or not, separated distance between the stop line of central lanes and crosswalks, traffic volume, and number of bus routes stopping at bus stops on reversible lanes, were found to have a significant influence on bus accidents. In case of roadside bus exclusive lane sections, the four variables such as the number of right-turn bus routes, whether to be chronic illegal parking & stopping, time for the walk signal, and forms of land use, etc. were found to have a significant influence on bus accident.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.65-75
• /
• 2014

Bus headway plays an important role not only in determining the passenger waiting time and bus service quality, but also in influencing the bus operation cost and passenger demand. Previous research on headway control has considered only an hourly difference in the distribution of ridership between peak and non-peak hours. However, this approach is too simple to help manage ridership demand fluctuations in a short time scale; thus passengers' waiting cost will be generated when ridership demand exceeds the supply of bus services. Moreover, bus ridership demand varies by station location and traffic situation. To address this concern, we propose a headway control algorithm for minimizing the waiting time cost by using Smart Card data. We also provide proof of the convergence of the algorithm to the desired headway allocation using a set of preconditions of political waiting time guarantees and available fleet constraints. For model verification, the data from the No. 143 bus line in Seoul were used. The results show that the total savings in cost totaled approximately 600,000 won per day when we apply the time-value cost of waiting time. Thus, we can expect that cost savings will be more pronounced when the algorithm is applied to larger systems.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.129-138
• /
• 2005

Since Successive introduction of BMS(Bus Management System) into the local governments has been able to collect each bus data on the road and valuate the bus operation by the quantitative index not qualitative index. we need a study on punctuality index for evaluation of service level for bus operation using bus location information. We propose punctuality index for bus operation using time-space diagram and valuate the index by application to real bus data.