• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.441-448
• /
• 2011

It is very important that establishing the valve train equations and representing the behavior of the valve train parts. To maintain the specific efficiency of running engine, the cam profile of valve train has more specific influence on the adequate behavior of the valve train than a valve clearance, heat-resistance and durability of parts. The polynomial cam, the multipol cam and polydyne cam profie are widely used to represent cam behaviour. In this study, using polydyne cam design profile equations which is more adequate for representing high speed engine, the geometrical modeling and mathmatical variable analysis are established to analysis the valve behaviour.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.184-192
• /
• 2001

Cam/tappet wear is one of the critical concerns in valve train deign. Maximum contact stress and minimum oil film thickness between the cam and tappet are usually checked for the estimation of wear characteristics. If the two extreme cases arise simultaneously, there is a strong possibility of cam/tappet wear. In this paper, effects of valve train layout on the wear characteristics were studied. Especially for swinging arm type valve trains, initial geometric layout must be very carefully defined to avoid wear problems. The study was performed fur an end pivot type OHC valve train, which had severe wear problems. Analysis results show that some geometric parameter affect very sensitively on the wear characteristics. Experiments were also performed for the original and modified valve trains, which strongly support the analysis results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1179-1184
• /
• 2003

The technique for measuring the rotational speed of tappet in direct acting type valve train system has been developed. The optic signal monitoring system with laser and optic fiber was designed to follow the signal of tappet rotation. The system was based on ON/OFF signal generation from the additional encoder teeth under the tappet with optic fibers attached photo transistor. The data showed that tappet rotation was affected by offset, oil temperature and cam shaft operating speed. Also it was found that tappet rotation increases with oil temperature. Tappet spin was delayed 10∼s20$^{\circ}$ cam angle after valve opening. The instantaneous rotational speed of tappet was reciprocal to cam shaft speed and the tappet and the cam angle ratio was located in the range of 0.1∼0.3.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.342-346
• /
• 1998

최근의 자동차엔진에서 사용되는 윤활유에는 여러 가지 첨가물이 사용된다. 특히 고분자량 폴리머계의 점도 지수 향상제를 윤활유의 원유에 첨가함으로써 온도 증가에 따른 점도 불안정성을 방지하는 다등급 윤활유 성격을 얻을 수 있다. 그러나 이러한 고분자량 폴리머계의 첨가물은 고온의 엔진 운전 조건에서 윤활유의 점도 안정성을 보장해줌에도 불구하고 엔진 부품들의 정상적인 운동 속도에서도($1-^6 S^{-1}$) 고 전단 변형율 속도로 인하여 유막 감소 효과를 발생 시킨다. 또한 이 첨가제들은 엔진 부품의 마찰 표면에 큰 전단 응력을 지닌 끈끈한 형태의 경계막을 형성한다. 고분자량 폴리머계의 점도 지수 향상제에 대한 예기치 못한 영향은 유막 감소 효과로 인하여 엔진 부품간의 마모를 증가 시키고 점도의 감소로 마찰을 감소 시키는 반면 경계막으로 인하여 고체면이 보호를 받는데 있다. 이러한 유막 형성의 물리적인 개념에 대하여 고체면의 끈끈한 경계막의 존재 효과와 두 경계막 사이에서 일어나는 유막 감소 효과를 표현할 수 있는 현실적인 해석의 필요성이 제기된다. 본 연구는 최근에 많이 쓰이고 있는 점도 향상제가 첨가된 윤활유가 자동차 밸브 트레인 시스템에서 유막 형성에 미치는 영향을 마찰 효율과 마모 방지의 입장에서 고찰하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.31-39
• /
• 2003

Numerical analysis for valve train dynamics of an internal combustion engine is presented. The components of the valve train are modeled by finite element techniques, and the dynamic contacts between the components are analyzed by the solution strategies of differential algebraic equations. Also an iterative scheme similar to the augmented Lagrange multiplier method is employed to enforce the contact constraints. It is shown that the contact and separation between the components of the valve train can be computed by the finite element techniques, and the numerical examples are presented to demonstrate the efficiency of the solution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.7-15
• /
• 2009

This paper introduces a new variable valve actuation mechanism with movable second cam center. Valve lift and open duration can be continuously varied according to engine speed and load conditions. A new method to analyze the kinematic relations between the first and second cam profiles and valve motion are also introduced. Because of rocker motion of the second cam, conventional motion conversion program could not be used in this problem. An example shows continuous variations of valve motion and adequate ramp incorporation throughout all valve lift modes. Valve acceleration profile at the high lift mode is similar to that of conventional valvetrains. Contact geometry analysis of the mechanism gives basic information on the load conditions between the components.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.151-159
• /
• 1998

디젤 엔진의 푸쉬로드 타입의 밸브 트레인에서의 힘의 전달 과정을 기구학적 응용을 통하여 구하였다. 이러한 힘의 최종 전달 단계인 캠과 평판 종동물의 접촉에서의 작용하중과 상대 운동 속도를 계산하였고 접촉면에서의 유막 두께를 고체면의 탄성변형을 고려하여 계산하였다. 특히 탄성 유체 윤활의 해석을 하는데 있어서 안정성과 수렴성이 우수한 멀티그리드 멀티레벨 기법을 사용하였으며 동하중 상태를 고려하여 유막 두께를 계산하고 기존의 정상상태의 해석해와 비교하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.117-122
• /
• 1997

밸브 트레인에서 국부 마멸을 줄이기 위한 태핏의 회전은 캠과 태핏의 접촉면에서 태핏속도의 변화를 가져오게 된다. 본 연구에서는 이러한 태핏의 회전속도를 캠/태핏 접촉면의 윤활 및 마찰 해석을 바탕으로 해석하고 이에 영향을 미치는 변수인 오프셋 거리, 엔진 회전속도 그리고 태핏과 실린더 헤드사이의 틈새에 대한 영향을 살펴보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.223-229
• /
• 2016

In this study, a cold forging process was developed for the roller tappet housing of an engine valvetrain system. A tappet sample was manufactured and subjected to an endurance test. The material properties were obtained from a compression test, and forging analysis was carried out to design a forging process using a commercial program, Deform-3D. The forging process was set up based on the analysis results, and a die set and sample tappet housing were manufactured. To evaluate the sample, the dimensional accuracy, surface roughness, parallelism, and concentricity were measured and confirmed. To evaluate the actuation and durability, a special test rig was developed to simulate the valvetrain system of the engine. An actuation test was performed based on the idle speed of a general diesel engine, and an endurance test was done based on the maximum speed. The results show minor wear of 0.002 mm. The developed test rig will be used to evaluate the actuation and durability of other valvetrain parts.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.1-8
• /
• 2004

In this paper we present the effects that valve train design parameters and operating conditions have on the valve rotation properties of a diesel engine. Rotation of intake and exhaust valves are very closely related to the long term durability of diesel engines. of the valves do not rotate even at a rated engine speed, it causes the uneven wear of the valve seat and valve head contact area, which eventually shortens the engine life. Because the rated speed of a diesel engine is relatively lower than that of a gasoline engine, the operating condition of a diesel engine produces tough environment for valve rotation. Therefore, the valve rotation is an important problem which should be solved in the early stage of engine development. In this study, we developed a new technique to measure the valve rotation and shaking motion simultaneously using three proximity sensors. Valve train rotating properties of a diesel engine were measured under various engine operating conditions.