• Journal of the military operations research society of Korea
• /
• v.26 no.1
• /
• pp.125-144
• /
• 2000

Occasionally, there are combat situations which one or both forces can´t terminate the combat using selected combat termination rule according to given relationship between ratio of attrition rate coefficient and threshold values. In this study, we classify the situations that one or both forces can´t terminate the combat with selected combat termination rule into four conditions. Condition${\circled1}$ is the situation which both Blue and Red can terminate the combat using all selected combat termination rules. condition${\circled2}$ and condition${\circled3}$ are those which neither Blue or Red can terminate the combat using selected proportional decision rule, and condition${\circled4}$ is that which both Blue and Red can´t terminate the combat using selected proportional decision rule. We analyze the effect of combat termination rules on parity number, final combat power, and combat durations for each conditions. Also, we propose the method to apply the analyzed effect of combat termination rules to combat analysis.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.223-228
• /
• 2019

In order to integrate large amounts of variable generation resources such as wind and solar reliably into power grids, accurate renewable energy forecasting is necessary. Since renewable energy generation output is heavily influenced by environmental variables, accurate forecasting of power generation requires meteorological data at the point where the plant is located. Therefore, a spatial approach is required to predict the meteorological variables at the interesting points. In this paper, we propose the meteorological variable prediction model for enhancing renewable generation output forecasting model. The proposed model is implemented by three geostatistical techniques: Ordinary kriging, Universal kriging and Co-kriging.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.55-59
• /
• 2022

This paper introduce Renewable Energy forecasting technology, which is a part of renewable management system. Then, calculation method of dedicated transmission line's meteorological data to forecast renewable energy is suggested. As the case of dedicated transmission line, there is only power output data combined the number of renewable plants' output that acquired from circuit breakers. So it is need to calculate meteorological data for dedicated transmission line that matched combined power output data. this paper suggests two calculation method. First method is select the plant has the largest capacity, and use it's meteorological data as line meteorological data. Second method is average with weight that given according to plants' capacity. In case study, suggested methods are applied to real data. Then use calculated data to Renewable forecasting and analyze the forecasting results.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.273-291
• /
• 2016

Some ceramic artifacts representing time-wise from comb pattern pottery in the Neolithic Age to white porcelain in Joseon Dynasty were selected from 7 sites in the north and south area of Charyeong Mountain Range in order to making techniques interpretation and development process of ancient ceramics through physicochemical and mineralogical quantitative analysis. Studied pottery samples in the Prehistoric times showed trace of ring piling in soft-type, and pottery in the Three Kingdoms Period had both soft and hard-type but kettle-ware and storage-ware were made with ring piling, but table-ware was made by wheel spinning. Different from pottery after the Three Kingdom Period when refinement of source clay was high, pottery in the Neolithic Age and in the Bronze Age exhibited highly mineral content in sandy source clay, which showed a lot of larger temper than source clay. Groundmass of celadon and white porcelain almost did not reveal primary minerals but had high content of minerals by high temperature firing. Ceramic samples showed some different in major and minor elements according to sites irrespective of times. Geochemical behaviors are very similar indicating similar basic characteristics of source clay. However, loss-on-ignition showed 0.01 to 12.59wt.% range with a large deviation but it rapidly decreased moving from the Prehistoric times to the Three Kingdom Period. They have correlation with the weight loss due to firings, according to burning degree of source clay and detection of high temperature minerals, estimated firing temperatures are classified into 5 groups. Pottery in the Neolithic Age and in the Bronze Age belongs from 750 to $850^{\circ}C$ group; pottery in the Three Kingdom Period are variously found in 750 to $1,100^{\circ}C$ range of firing temperature; and it is believed celadon and white porcelain were baked in high temperature of 1,150 to $1,250^{\circ}C$. It seems difference between refinement of source clay and firing temperature based on production times resulted from change in raw material supply and firing method pursuant to development of production skill. However, there was difference in production methods even at the same period and it is thought that they were utilized according to use purpose and needs instead of evolved development simply to one direction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.317-328
• /
• 2019

In this work, we investigated clay and raw materials from China (black clay, red clay, white clay) and Korea (Cheonan clay, Obu clay) used for the manufacture of porcelain products. According to chemical analysis results, feldspar components containing CaO, K₂O, Na₂O and quartz are found in clay materials besides primary clay such as kaollinte, for the clay materials from Korea, which is found more in clay materials from Korea than from China. For the Fe₂O₃ content, governing whiteness of porcelain products, more iron oxide (> 5 %) is found in Korean clays (Cheonan clay, obu clay, red clay) compared to those form China (black, white clay). Through X-ray diffraction analysis, kaolinite and Halloysite are found to be main phases for all the raw materials and second phases such as quartz and pyrophyllite are found. Using these clay materials, raw materials for porcelain products were produced, and the physicochemical properties were investigated for sintered samples. Absorption rate is in order of Baekja-A < Baekja-B < Yeonbuncheong < Jinbuncheong < Cheongja, and the sample, sintered at 1250℃ in reductive atmosphere, exhibits the lowest absorption rate. Comparing the color of the sintered samples, the samples sintered in oxidative atmosphere (L^* value: 86~95 %) show higher whiteness value than those sintered in reductive atmosphere (L^* value: 81~93 %). For the Cheongja and Buncheong, the samples sintered in reductive atmosphre shows higher whiteness, L^* values, and low a^*/b^* value, which is due to reduction of iron oxide (Fe₂O₃).

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.48-70
• /
• 2003

The characterization of chemical properties and analogy of mallufactured origin for the nine potsherds and eleven celadon sherds collected in Wonnae-dong, Daejeon and Yucheon-ri, Buan, respectively were performed by analyzing their body and glaze compositions and compared with previous data reported. The chemical compositions of the body and glaze were determined by XRF and EPMA, respectively. The trace elements of the body were analyzed by ICP-MS. The Seger analysis and principal components analysis were used to compare the major compositions of body and glaze of the potteries we found with previous data. Wonnae-dong's Whiteware (C-1) showed considerably high $SiO_2$ concentration differently from the other potteries. Wonnae-dong's Whiteware (C-2) showed similar characteristics with potteries of Seoul-Kyeongi and Daejeon-Chungnam provinces in chemical compositions of the body and the glaze. Wonnae-dong's celadons (B-1 and B-2) were classified as the group of Daejeon, Chungman provincial potteries in chemical compositions of the body. It was difficult to distinguish the characteristic differences in the Buncheong data between the provinces with the Seger formula analysis and the PCA. Celadon from Yucheon-ri site showed the same characteristics with previous data reported. The results above demonstrated that it is reasonable to study the characterization of potteries and analogy of manufactured origin with a comparison for the chemical compositions of the body and the glaze of the potteries by using the Seger formula analysis and the PCA.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.345-356
• /
• 2011

To remove metal stains of the ceramics, chemical cleaning is essential case by case. This study investigated the removal characteristics of iron stains by oxalic acid and citric acid including their application methods of soaking and poultice. The soaking method in cleaning agents showed removal process by color difference and released iron contents from iron stains on ceramics. Iron stains were removed successfully from ceramics, which soaked in oxalic acid for 60 hours. However, it is recommendable to soak in 0.25M oxalic acid for one to three hours because most iron stains were disappeared in 3 hours soaking. Citric acid is less effective than oxalic acid in removing iron stains because of heavy molecular weight and low acidity. Poultices (bentonite, sepiolite, activated carbon fiber and celite) with oxalic acid were applied on contaminated ceramics. After ten hours, iron stains on ceramics were removed successfully by poultice. Among them, bentonite and sepiolite have better application. Therefore, sepiolite with 0.25M oxalic acid was applied on the iron stains of whiteware and celadon from Ma Island, and then stains were removed. However, it is judged that the application methods can be varied according to the form and depth of contaminant. In addition, the residues of poultice on the ceramics will be considered for preventing contamination.

• Archives of design research
• /
• v.21
• /
• pp.99-106
• /
• 1997

There were the changes of shapes and color tones when the soil materials e.g. Blue-Porcelain, White-Porcelain, Bunchong, mixed A and B, mullite, Sanchong and Ongki - used by most domestic ceramic artists - were glazed at $ 950^{\circ}C,; 1200^{\circ}C,; 1250^{\circ}C,; 1280^{\circ}C,;1300^{\circ}C$ After the materials were dried out at 120t: in an electric oven, they were mixed with water, keeping the percentage of moisture content 25% and kneaded specimens which are hexahedron by $$ 250{\times}30{\times}8mm$$were produced and dried after calibrated at 200mm interval with a vernier caliper. After the materials were dried and glazed, they showed few shape-changes at $950^{\circ}C$ but began to changed at $1200^{\circ}C$,especially Bunchong and Ongki made rapid changes. In the case of color-change, White-Porcelain changed very little. The color of Blue-Porcelain, mixed A and B, Sanchong, Mullite changed to ]aune brilliant as temperature went up but Bunchong and Ongki changed to dark brown or dark chocolate under the same conditions. This study aims at suggestion of the basic data which minimize failure rates by recognizing the property of the materials on the basis of this study and regulating shape-change phenomena and sensitive changes of color when ceramic artists work.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.141-147
• /
• 2000

Interrelation between the antioxidative activity of hot-water extracts of 130 medicinal plants and their cellular antimutagenic activity was investigated. Antioxidative activity was evaluated by assaying electron-donation to DPPH free radical and scavenging of hydroxyl radical $({\cdot}OH)$ generated through Fenton rection, respectively. All medicinal plants examined in this study exhibited markedly electron-donating ability and radical scavenging ability in each assay system. The results demonstrated the fact that Pilbal (Piper longum L.) is the strongest in electron-donating activity, on the other hand, that Seokgok (Dendrobium moniliforme L.) is the strongest in ${\cdot}OH$ scavenging activity. When evaluated their antioxidative activities, 24 medicinal plants including Jimo (Anemarrhena asphodeloides Bunge) were found to be the medicinal plants carrying strong antioxidative activity, which exhibited more than 50% activity compared to the control group in both electron-donating and free radical scavenging. The experiment was also performed to examine whether 11 medicinal plants having significant antimutagenicity damage DNA in the presence of $Cu^{2+}$, showing the fact that all samples tested, except Taeksa (Alisma canaliculatum All. Br.), Paekjain (Nitraria sibirica Pall) and Ohyak (Lindera strychifolia Sieb. et Zucc. Villar) are capable of inducing DNA strand break. We also found that Taeksa and Paekjain strongly block DNA strand break induced by chemical mutagen mitomycin C.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.961-965
• /
• 2007

현재 오염총량관리제를 시 군 단위의 기초자치 단체별로 시행하고 있는데 실제로 오염물질의 전달은 행정구역단위가 아닌 유역내에서 이루어지진다. 따라서 본 연구에서는 기초자치 단체별이 아닌 유역단위로 오염부하량과 삭감량을 산정함으로써 유역 단위의 오염총량관리제 계획 수립을 위한 토대를 제공하고자 한다. 본 연구에서는 보청천 유역을 대상으로 유역의 오염부하량을 산정하고자 하였다. 이를 위하여 지리정보시스템(GIS)인 WMS(Watershed Management System)와 ArcView를 이용하여 유역의 지형인자들을 추출하고, 각 소하천의 토지이용도와 생활계, 축산계, 양식계, 토지계를 바탕으로 원단위를 적용하여 발생부하량을 산정하였다. 그리고 각 소하천별 발생부하량 산정 결과를 토대로 각 수질관측점을 기준으로 하여 배출부하량을 산정하였으며, 배출부하량의 산정결과를 이용하여 유달부하량을 산정하였다. 이를 위해서 필요한 수질 데이터는 QUAL2E 모형을 이용하여 모의 하였으며, 수리 및 수질 매개변수를 추정하고 모형의 보정 및 검증을 수행하였다. 그 결과 유달부하량은 BOD는 2013.16kg/일, TN은 1091.34kg/일, TP은 235.16kg/일이 도출되었다. 따라서 장래에 수질이 악화될 경우를 고려하여 수질 항목별 오염량이 2배, 3배로 증가한다고 가정하였다. 오염량이 2배 증가하였을 경우, 오염부하량을 산정한 결과 보청천3 지점에서 BOD는 184.68kg/일이 삭감되어야 하고, 오염량이 3배 증가하였을 경우 BOD는 1775.69kg/일이 삭감되어야 한다는 결과를 도출할 수 있었다. 본 연구와 같이 유역단위로 오염부하량을 산정할 경우, 오염원을 줄이는데 효율적일 것으로 생각되며, 향후 오염총량관리제를 위해 유역단위의 오염부하량 산정을 고려하면 좋을 것으로 사료된다.는 지배적인 요인으로 남게 될 것이다. 본 연구에서는 현재 진행중인 승기천 오염하천 정화사업이 종료되는 시점을 기준으로 남동유수지에 대해 승기천과 연계한 유수지의 환경개선 방법을 제안하였다. 준설을 통해 유수지의 근본적인 오염원을 제거하고 남동유수지 유입부에 인공습지와 수처리설비를 설치하여 유수지의 수질을 개선하고 개선된 수질이 3급수로 유지하도록 하였으며, 설치된 인공습지에는 철새도래지를 조성하여 유수지 유입수인 철새가 날아드는 하천인 승기천의 테마와 연계하도록 하였다. 인공습지 주변으로 식생호안을 설치하고 유수지 주변에는 산책로를 설치하여 지역주민들의 친환경 수변공간으로 활용하도록 하였다. 1유수지와 연결된 2유수지는 BTL사업을 통해 주변공단으로부터의 오폐수를 원천적으로 차단하도록 하였으며 2유수지를 매립하여 지하는 강우시 유출수 저류가 가능한 화물차주차장으로 활용하고 지상은 녹지공간으로 조성하여 공단근로자 및 지역주민을 위한 휴식공간으로 활용될 수 있도록 제안하였다. 본 연구는 남동유수지 환경 개선 사업 실행을 위한 정책 연구로 연구결과를 인천시가 적극 수용하기로 결정함에 따라 인천시의 환경 현안 문제인 남동유수지의 수질개선을 통해 시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주