• Journal of the Korea Computer Industry Society
• /
• v.10 no.4
• /
• pp.153-158
• /
• 2009

This paper designed for natural lighting environment implementation with mixed color and white LED equipment. Lighting LED equipment Have a lot of advantage than traditional commercial lighting equipment. Such as high energy conversion efficiency and easy dimming control performance. This paper proposed LED lighting equipment with color sensor acquisition system can make best lighting environment for Human various kinds necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7256-7261
• /
• 2015

This paper devised a plant growing system As LED light source, three monochromatic lights (red, blue, white) and three mixed lights (red1+blue1, red2+blue1, red1+blue2) were made. According to the optical properties of those LED light sources and change in the amount of light, this author analyzed the characteristics of luminance and PPFD and also plant growth. According to the light efficiency of those LED light sources, it was high in white light as 125 lm/W and was low in red1+blue2 light as 9.9 lm/W. This result shows that monochromatic light has higher light efficiency than mixed light. The PPFD ($25{\mu}mol$, $50{\mu}mol$, $100{\mu}mol$) luminance in different wavelengths of LEDs was high in white LEDs and was low in blue LEDs. therefore, it is possible to devise an efficient LED lighting system appropriate for growing plants by variety monochromatic lights and mixed light wave length combination of LED light source.

• Photonics industry news
• /
• s.30
• /
• pp.48-55
• /
• 2005

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.459-460
• /
• 2006

RGB 3색 LED를 이용 백라이트에서는 백색 광원을 구현을 위해서는 혼색을 위한 충분한 공간 또는 광학계를 필요로 하고 있다. 본 연구에서는 RGB 3색 LED의 컬러 혼색을 위해 광학 설계를 진행을 하였고, 이 광학계는 광경로 변경을 통해 BLU 내부 공간에서 각각의 3색 LED가 충분한 혼색 구간을 확보하여 백색을 구현하게 된다. 최근 적용하고 있는 Side emitting 방식 LED가 아닌 Top view type의 power LED를 이용하여 32인치급 TV LCD 백라이트를 제작하여 최적화를 진행하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.63-68
• /
• 2012

This study was performed to determine optimum conditions of batch type cultivation of Isochrysis galbana cultivated under various wavelengths of light emitting dioes (LEDs). Among LEDs used in the cultivation, white LED was found to be the most effective light source, and light intensity of 3,000Lux resulted in the most effective for the cultivation of Isochyrysis galbana. Comparison with common light source, fluorescent light, showed less effective than that with white LED. Four different air flow rates were tested to overcome shading effects due to denser cell concentration in the solution. In results, cell growth rates and maximum cell concentrations were similar regardless of air flow rates. Three times greater cell concentrations, however, were observed when air was applied.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.63-67
• /
• 2015

White light-emitting diode (WLED) is growing interest in using both illumination and communications. This paper reports visible light communication (VLC) composed of a super bright white light-emitting diode, low cost commercial photo-diode and a Fresnel lens. LED driver is consisted of the power MOSFET and MOSFET driver that switches the LED on and off. The modulation bandwidth of the LED used was determined to be 8 MHz. However, it was possible to communicate up to 1 Mbps under illumination of 500 lx because of the weak signal power and a low spectral sensitivity of the SHF213 as a PIN photodiode. In order to enhance the system bandwidth, the LED light was focused on the PIN photodiode by use of the Fresnel lens. As a result of that, visible light link was operated up to modulation bandwidth of the LED. The signal to noise ratio can be improved by 40 dB using an optical concentration at the receiver.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.15-21
• /
• 2004

The optical characteristics; luminous flux, correlated color temperature, and CIE -chromaticity coordinate etc., of HB LED(high brightness light emitting diode) of yellow/green/white SMD(surface mounted device) type were tested with integrating sphere photometer and monochromator, and the results were comparatively evaluated And, for the white LED, color rendering indices were considered to analyze.

• Korean Journal of Optics and Photonics
• /
• v.25 no.4
• /
• pp.216-220
• /
• 2014

We have synthesized a $CaMgSi_2O_6:Eu^{2+}$ blue phosphor via a solid-state reaction method. The $CaMgSi_2O_6:Eu^{2+}$ phosphor has monoclinic structure with a space group of C2/c (15), and an emission band peaking at 450 nm (blue) due to the $4f^7-4f^65d$ transition of the $Eu^{2+}ion$. The emission intensity at $100^{\circ}C$ is 54% of the value at room temperature. A white LED was fabricated by integrating a UV LED (400 nm) with our blue phosphor plus two commercial green and red phosphors. The white LED shows a color temperature of 3500 K with a color rendering index of 87 (x = 0.3936, y = 0.3605), and a luminous efficiency of 18 lm/W. The white LED shows a luminance maintenance of 97% after operation at 350 mA for 400 hours at $85^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.198-198
• /
• 2003

LED(Light Emitting Diode)는 전기 신호를 빛으로 신호를 보내고 받는데 사용되는 반도체의 일종으로 가정용 가전제품, 리모컨, 전광판, 각종 자동화 기기등에 사용된다. 3색광 백색 LED는 soft-UV 또는 blue 빛을 내는 device 와 RGB 형광체로 이루어져 있다. 현재 연구중인 3색광 백색 LED는 InGaN 또는 GaN 이 RGB 형광체를 여기 시키는것이 대부분이다. 이러한 경우에 유기물과 무기물 형과체가 백색광을 구현하기 위해 사용된다. 유기물의 경우에는 lift-time 이 짧고, 무기물의 경우에는 유해원소인 S, Cd등이 포함되기 때문에 환경오염이 야기된다. 이러한 단점을 보완하기 위해 진화 최적방법을 이용하여 alkali earth borosilicate ((Eu,Mg,Ca,Sr,Ba)$_{x}$ $B_{y}$ S $i_{z}$ $O_{d}$ ) 계열에 $^{Eu3+}$을 도핑하여 고효율 형광체를 합성하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.293-294
• /
• 2012

백색 OLED 조명 분야에서 색 변환은 큰 이슈가 되고 있다. 하지만 청색 유기물의 발광 특성이 좋지 못하여 아직까지 정착이 되지 못하고 있는 것이 현실이다. 본 연구에서는 발광 효율이 낮은 청색 OLED 대신 청색 LED와 황색 OLED를 사용하여 색 변환을 통한 백색 발광 panel을 제조하고 전기 및 광학적 특성을 평가하였다. 먼저 OLED소자는 진공증착방법을 사용하여 ITO (150 nm)/KHI-001 (5 nm)/LG-101 (10 nm)/KHT-001 (25 nm)/ PGH-02 (25 nm): Ir (mpp) 3 (8%): PRD-003 (0.3%)/TMM-004 (10 nm)/LG-201 (20 nm): LiQ (50%)/Al (150 nm) 구조를 갖는 발광면적 $70{\times}70mm^2$의 황색 OLED panel을 제작하였다. CIE 1931색좌표는(0.49, 0.49)이고, 효율은 $41.61{\ell}m/W$이다. 그리고 LED는 청색 칩을 한 줄로 나열하여 LED bar를 만들었고 여기에 도광판, 리버스 프리즘시트, 확산시트 그리고 반사시트를 더하여 점광원을 면광원화 하였다. CIE 1931색좌표가 (0.15, 0.04)이며 효율은 $3.56{\ell}m/W$이다. 황색 OLED를 청색 LED 면광원 뒤에 붙여서 두 빛이 도광판 위쪽으로 나오게 하였다. 이렇게 hybrid된 빛은 인가 전류를 변화 시킴으로써 색온도 3,200 K의 warm white에서 7,800 K의 cool white까지 변환이 가능하였다. 그리고 순백의 hybrid 빛을 얻을 수 있었는데 이때의 색온도는 4200K이고 CIE 1931색좌표는(0.34, 0.33)이며 연색지수는 89였다.