• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.425-440
• /
• 2022

Purpose: The purpose of this paper is to improve the chromaticity coordinate quality of white LED packages for automobiles that require high quality and reliability. Methods: The project follows the structured methodology of the Six Sigma DMAIC Roadmap, which consists of Define, Measure, Analyze, Improve and Control phases. Results: A CTQ is determined based on COPQ analysis, and a process map and a XY matrix are utilized for selecting process input variables. Three vital Few Xs are identified through data analysis; amount to mix at one time, deviation by head pumps, and deviation by production magazines, and process improvements are performed for each of the three vital Few Xs. Conclusion: The improved process conditions for the three vital Few Xs are applied to the production line, and the results show that the percent defective of chromaticity coordinate has improved from 1.59% to 0.63% and a financial effect of about 50 million won per year is obtained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.327-334
• /
• 2024

In this paper, we developed a system with a near-infrared LED light source with a wavelength of 950nm to acquire palm vein images and a white LED light source to acquire palm creases based on Raspberry Pi. In addition, we implemented a unique pattern-extractable image processing technology that can prevent counterfeiting and enhance security of mixed creases and palmprints through image pre-processing (Gray scaling, Histogram Equalization, Blurring, Thresholding, Thinning) for the acquired vein and palm images, and secured a source technology that can be used in a security-enhanced system.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.1-6
• /
• 2008

In this paper, the white organic LED with two-wavelength was fabricated using the NPB of blue emitting material and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The structure of white OLED was ITO/NPB$(200{\AA})$NPB:Rubrene$(300{\AA})$/BCP$(100{\AA})/Alq_3(100{\AA})/Al(1000{\AA})$ and the doping concentration of Rubrene was 0.75 wt%. We obtained the white OLED with CIE color coordinates were x=0.3327 and y=0.3387, and the maximum EL wavelength of the fabricated white organic light-emitting device was 560 nm at applied voltage of 11 V, which was similar to NTSC white color with CIE color coordinates of x=0.3333 and y=0.3333. The turn-on voltage is 1 V, the light-emitting him-on voltage is 4 V. We were able to obtain an excellent maximum external quantum efficiency of 0.457 % at an applied voltage of 18.5 V and current density of $369mA/cm^2$.

• Korean Journal of Plant Resources
• /
• v.21 no.4
• /
• pp.304-309
• /
• 2008

All the seeds of rape (Brassica napus) sprout vegetables were germinated within three days after seeding irrelevant to the light colors. The total fresh weight of rape sprout vegetables at 6 days after seeding have been increased when grown under green and white color lights by 0.339g/10plants and 0.339g/10plants compared with the control. The total flavonoid contents in rape sprouts were increased under red and blue lights by 72.5 and 70.9mg${\cdot}L^{-1}$. Those DPPH radical scavenging activities at 2,000mg${\cdot}L^{-1}$ were increased by 90.0 and 90.3% which were sprouted and grown under blue and white lights. Nitrite radical scavenging activity of sprouts were most decreased compared with the control when grown under the red light by 57.4mg${\cdot}L^{-1}$. And mushroom tyrosinase inhibition activity of rape sprouts was extremely increased under the green light by 22.5mg${\cdot}L^{-1}$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.128-135
• /
• 2013

This paper presents a high dimming ratio Power-LED driver IC with high power which is capable of controlling LEDs. In order to accomplish a high dimming ratio LED driver, the preloading inductor current methodology is proposed for the power stage of the proposed method to achieve the fast transient response time during the Power-LED load switching. The information containing the current flowing on the LEDs can be utilized to predict the amount of the current on the inductor. The minimum LED current rising time of existing high dimming ratio Power-LED driver is limited by $3{\mu}s$, however that of the proposed high dimming ratio Power-LED driver is reduced about 1/10. The LED driver is implemented with 0.35um 60V BCDMOS 2-poly 4-metal process. The measurement results show that the proposed LED driver system features the minimum rising time as small as 240ns at the dimming frequency of 1KHz with a 12V of input voltage, nine white LEDs and 353mA of LED current. The LED rising time and power conversion efficiency of the chip are measured to be 240ns and 93.72%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.388-393
• /
• 2015

Buckwheat sprouts are a vegetable; a functional food should provide health benefit and enhance performance as high nutritionally important substances. Buckwheat noodles are the major buckwheat food in Japan, Korea and China. In addition, Buckwheat as preventive medicine has undergone a great advancement in the last decade. Comparison of the functional properties distribution and utilization in tatary buckwheat is required of understanding the metabolites. The study was conducted to identify the sorts of phenolic compounds and metabolites in tatary buckwheat seedling at 4, 7, and 10 days seedling under the different combinations of light-emitting diode (LED) such as blue, red, mix (red, blue, and white), dark, and natural lights in stem and leaves. After breaking the dormancy, buckwheat seeds were grown in culture room under lights for 14 hrs and the dark condition for 10 hrs, at $25^{\circ}C$ for 10 days. Length of buckwheat was gradually increased under all of the conditions. Using HPLC, rutin was highest at 7 days under mix and natural light in stem and leaf, respectively. Quercetin was highest at 4 and 7 days under natural light in both. Chlorogenic acid was highest at 7 days under mix and natural in stem and leaf, respectively. Taken Together, this study indicates that phenolic compounds and metabolites present in those plants could be helpful for the human health and nutritional additive.

• The Optical Journal
• /
• s.136
• /
• pp.36-41
• /
• 2011

OLED는 유기발광 물질에서 나오는 빛을 이용하는 소자로 현재는 주로 디스플레이분야에서 LCD와 경쟁하고 있다. OLED 조명은 백색을 내는 OLED 소자를 조명으로 이용하는 것으로 휘도가 높고 낮은 전압에서 구동되며 유리 기판위에 제작됨으로 얇다는 장점을 가지고 있다. 특히 OLED는 수 mm 이하의 두께로 구현이 가능하여 경량 박형의 광원이 가능하므로 실치 장소에 대한 제약이 거의 없다는 장점을 까지고 있다. 시장전망 기관들에 따르면 OLED 조명 시장은 2012년을 전후로 본격적으로 시작될 것으로 예상하고 있다.

• The Science & Technology
• /
• v.35 no.9 s.400
• /
• pp.6-9
• /
• 2002

소아마비 바이러스 실험실 합성 성공/3억4천5백만년 전 최초의 보행동물 화석 발견/남북극에서 번개가 가장 많이 일어나/백색의 빛을 방출하는 LED개발/형상을 기억하는 플라스틱 개발/작은 입자를 걸러내는 필터/화성에서 35억년전 홍수가 대협곡을 만들었다/천연 잔디를 능가하는 새로운 인조잔디/양자 컴퓨터의 핵심 기술 실험 성공/약품의 초소형화로 흡수 효과 높인다/과일을 익히는 유전자 발견/여자가 정서적 스트레스에 의한 심장마비 잘 일으켜/생쥐 지놈의 물리지도 완성

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.70-74
• /
• 2009

In this paper, We propose the visible light communication(VLC) link based on white light emitting diode (LED) and Photo detector(PD). The proposed architecture is demonstrated experimentally and its performance is verified through the experimental results of quality-factor(Q-factor) and eye pattern of 10Mb/s PRBS signal. The ambient light effect from a typical type fluorescent lamp source was also analyzed. when the distance between the LED and the PD is about 1m, error free wireless transmission of the LED was achieved up to 10Mb/s data rate. Under the condition with ambient light, low BER, data transmission of the VLC link is achieved up to 5Mb/s data rate at 1m. Also, when the PD is placed away from the center, low BER data transmission of the VLC link is achieved up to 1Mb/s at 10cm and 10Mb/s at 5cm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.35-38
• /
• 2015

LEDs are considered to be an alternative for enhancement of energy efficiency, applied for numerous areas such as display, automotive headlight not only lights. Yellow phosphor is generally utilized with blue LEDs to generate WLED, $Y_3Al_{5}O_{12}:Ce^{3+}$ is typically used as the yellow phosphor. The phosphor, mixed with epoxy resin, has been used by being spread and hardened on the blue LED chip. This paste-based packaging gives rise to problems of degradation of phosphor by heat and decrease of luminous efficiency. Although phosphor plate is used instead of the epoxy-phosphor mixture to solve these problems, loss of luminous efficacy by total internal reflection inside the plate also should be solved. In this study, we coated the side of the plate with silver as one of the solution.