• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.5
• /
• pp.357-364
• /
• 1998

To investigate accuracies between intensity method and count method for measurement of the fiber orientation distribution, fiber orientation function is derived by drawing simulation figure for the fiber orientation as varying fiber aspect ratio, fiber area ratio, and fiber orientation state, respectively. The values of fiber orientation function measured by intensity method and count method are compared with the calculated ones from simulation figures. The results show that measurement accuracy of fiber orientation angle distribution obtained by count method is by 4% higher than that by intensity method.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.33-37
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimide material. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time.Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2015

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the ion beam alignment method on the a-C:H thin film. The suitable inorganic thin films for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film were studied. An excellent voltage-transmittance (V-T) and response time curve of the ion beam aligned FFS-LCD was observed with oblique ion beam exposure on the a-C:H thin films. Also, the V-T hysteresis characteristics of the ion beam-aligned FFS-LCD with IB exposure on the a-C:H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide surface.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.54-57
• /
• 2012

Nematic liquid crystal (NLC) alignment effects on SiOF layers via ion-beam (IB) irradiation for four types of incident energy were successfully studied. The effect of fluorine addition on silicon oxide film properties as a function of $SiOF_4/O_2$ gas flow ration was investigated. The SiOF thin film exhibits good chemical and the thermal stability of the SiOF thin film were sustained as function of the NLC alignment until $200^{\circ}C$ Also, the response-time characteristics of aligned LCD based on SiOF film were studied.

• Composites Research
• /
• v.23 no.1
• /
• pp.17-22
• /
• 2010

The compressive and dynamic properties of magnetorheological elastomers were investigated as functions of magnetizable particle volume fraction, alignment of the embedded particle and magnetic force. The specimens consisted of pure and filled silicons with randomly dispersed, longitudinal and transverse aligned magnetizable particle chains. To align the embedded particles in the elastomer, the cross-linking of the elastomer composites took place in a magnetic field. The compression and dynamic tests in the absence and the presence of different magnetic forces were carried out. The modulus and loss factor of the elastomer composites increase with increasing volume fraction at the same magnetic force. The case of longitudinal alignment shows a high modulus and loss factor when compared to the case of transverse alignment or random dispersion.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.145-148
• /
• 2012

The effects of the linearly polarized UV (LPUV) irradiation and thermal treatment of a photo-degradable polyimide (CBDA-ODA) alignment layer (AL) on its AL properties, liquid crystal (LC) alignment, and LCD characteristics have been investigated. The best quality of LC photo-alignment have been induced by the LPUV-irradiation with much (about 5~10 times) less dosage than that generating the maximum anisotropy of the AL. A thermal treatment of the LPUV-irradiated AL has effectively removed the undesirable, low-M.W. fragments of the AL generated during the photo-decomposition and increased the stability of the AL, which has resulted in improvement of the LC alignment and the LCD property.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.1
• /
• pp.105-111
• /
• 1986

본 연구에서는 연신정도가 다른 완전배향사(FDY)와 부분배향사(POY)를 열처리시켜 내부구조변화를 유도한 후 염색성을 연구하였고, 염색성과의 관련성을 위해 결정화도 및 복굴절룰을 조사하였다. 열처리는 silicone oil속에서 정장상태로 실시하였으며, 시료의 염색은 Disperse Yellow 42를 이용해 무한염욕상태에서 실시하였다. 그리고, DMF를 이용해 염료를 추출시킨후 spectrophotometer 로 염료흡착량을 측정하였다. 결정화도는 밀도-결정화도 관계식으로 구하였으며, 복굴전률은 편광현미경으로 시료의 두께와 retardation을 측정한 후 계산하였다. FDY와 POY 필라멘트사의 염색성은 열처리시 감소하였으며 POY의 염색성이 FDY보다 우수했다. 결정화도는 열처리시 증가하였으며 열처리되지 않은 POY가 열처리되지 않은 FDY에 비해 낮은 값을 나타냈다. 복굴절률은 열처리시 증가하였으며 열처리되지 않은 POY가 열처리되지 않은 FDY에 비해 낮은 값을 나타냈다. 열처리후에도 POY가 FDY보다 낮은 복굴절률을 나타낸 반면 결정화도는 열처리된 POY가 열처리된 FDY와 비슷한 값을 나타냈다. 염색성은 결정화도와 배향도에 부적인 상관관계 즉 결정화도와 배향도가 증가함에 따라 염색성은 감소하는 관계를 시사했다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.107-110
• /
• 1999

본 연구에서는 진공압추출법에 의해 제조되는 알루미나(AI$_2$O$_3$) 단섬유예비성형체의 제조공정시 발생하는 섬유들의 배향분포의 특징을 2차원 수치모사를 통해 밝혔다. 수치해석은 섬유의 배향분포를 2차원으로 가정한 후 제조공정시 섬유들이 적층되는 현상을 섬유의 낙하, 회전, 미끄러짐, 이동의 단계의 나누어 모델링하였다. 해석결과 섬유의 배향과 부피분율은 섬유의 종횡비(길이/지름)에 의해 크게 영향을 받으며, 배향 분포는 정규분포와 유사한 것으로 밝혀졌다.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.70-81
• /
• 1992

비교적 묽은 섬유현탁액의 압출팽창 유동을 수치모사하기 위하여 유동장과 섬유배 향 사이의 상호작용을 고려하고 연속체이론에 기초한 유변방정식을 사용하였다. 또한 섬유 배향분포를 얻기 위하여 배향텐서로 표시된 섬유배향방정식을 사용하였는데 이때 섬유간 상 호작용의 효과를 고려해 주기 위하여 현상학적 확산항을 추가하였다. 실험결과와 비교가 용 이한 원통관을 통과하는 섬유현탁액의 압출팽창 유동을 수치모사한 결과 관 입구에서 섬유 가 유선방향으로 정렬되어 유입될 때 현탁강도가 증가함에 따라 팽창비는 감소함을 알수 있 었다. 하지만 관 길이가 짧고 또한 관 입구에서 섬유가 임의 배향상태로 유입될 경우에는 반대로 팽창비가 증가함을 보였다. 관 입구에서의 다른 배향상태에 의해 발생하는 팽창비의 서로다른 경향은 외부 표면부분과 내부중심부분의 신장점도의 차이로 설명할 수 있었다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.22-26
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimde material. Especially, PS has higher transparent property than conventional polyimide thin film and it means PS is more suitable material for producing high brightness mobile LCD. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time. Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property. And it has a highly potential of mobile high transparent mobile LCD such as smart phone display and mobile information device.