• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.

• Korean Journal of Poultry Science
• /
• v.18 no.1
• /
• pp.43-55
• /
• 1991

This experiment was conducted to study the sparing effects of animal proteins on weight gain, nutrients utilizability and economic analysis of broiler. Experiment diet contained different ratio of animal and plant protein and were supplemented different levels of methionine and lysine for the respective protein levels. A total of 264 broiler chicks were fed four diets of control, $T_1$, $T_2$ and $T_3$ for 42 days from April 7, 1990 to May 19, 1990. Dietary protein levels of control, $T_1$, $T_2$ and $T_3$ for starter and finisher were 20~18, 18~16, 18~16 and 22~20%, respectively. Methionine and lysine levels of control, $T_1$, $T_2$ and $T_3$ were 0.4~1.1, 0.44~1.21, 0.48~1.32 and 0.48~1.32% for starter diet, respectively, and were 0.32~0.90. 0.35~0.99, 0.38~1.08 and 0.38~1.08% for finisher diet, respectively. The results obtained were summarized as follows. 1. The birds fed control diet gained most for overall period. $T_3$ treatment which was high in protein, methionine and lysine levels gained most for finisher period. 2 The birds fed control diet consumed most feed, and the birds fed T$_3$ diet consumed least feed. for overall period. Feed conversion during 1~4 weeks was better in $T_1$ (1.51) and $T_2$ (1.53) than in control (1.61) and $T_3$ (1.63) . During 4~6weeks, feed conversion was better in $T_3$ (1.37) and control(1.58) than T, (2.05) and T, (2.16) (P＜0.01) 3. Dry matter, crude fiber and NFE utilizability were increased for 1~4 weeks and decreased for 4~6 weeks as methionine and lysine levels increased and crude protein utilizability tended to be increased as protein levels increased. 4. Abdominal fat content was lowest in bird fed control diet and was high in birds fed low protein diet Carcass percentage was highest at control and the abdominal fat content was higher in bird fed lower protein diet than bird fed other protein diets(P＜0.05). 5. Feed cost per kg weight gain was lowest at $T_3$ which contained more soybean oil meal than other feeds and next was control. According to the results of this experiment, it was revealed that optimum protein, methionine and lysine levels for starter and finisher broiler diet were 20~18, 0.4~0.32 and 1.1~0.9%, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1071-1080
• /
• 2017

This study examined the adhesiveness of beneficial intestinal bacteria to whole-grains using confocal scanning laser microscopy (CLSM), to demonstrate the prebiotic effects of whole-grains, and to develop prebiotic puffed snacks with these whole-grains. CLSM has been used to observe the adhesiveness of Lactobacillus acidophilus, which belongs to beneficial intestinal bacteria, to whole-grain powders using optical sectioning techniques. The enhanced effects on the growth of beneficial intestinal bacteria with the hot water grain extract were verified using an indirect count method. Finally, a puffed snack was produced with the prebiotic effect and the quality was evaluated by checking the chromaticity and degree of hardness. As a result, L. acidophilus exhibited adhesive ability to whole-grain powders and growth of selected beneficial intestinal bacteria were improved significantly. The Hunter L value of the developed puffed snack increased when seasoning was added. The hardness of the puffed snack with seasoning was higher than that of the control. The results of a sensory evaluation showed that the puffed snack with seasoning was highly rated in the overall preference compared to the control.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.190-197
• /
• 2012

The purpose of this study was to evaluate thermal environment and heat budget of light thin layer green roof through an experiment in order to quantify its heat budget. Two concrete model boxes($1.2m(W){\times}1.2m(D){\times}1.0m(H)$) were constructed: One experiment box with Zoysia japonica planted on substrate depth of 10cm and one control box without any plant. Between June 6th and 7th, 2012, outside climatic conditions(air temperature, relative humidity, wind direction, wind speed), evapotranspiration, surface and ceiling temperature, heat flux, and heat budget of the boxes were measured. Daily maximum temperature of those two days was $29.4^{\circ}C$ and $30^{\circ}C$, and daily evapotranspiration was $2,686.1g/m^2$ and $3,312.8g/m^2$, respectively. It was found that evapotranspiration increased as the quantity of solar radiation increased. A surface and ceiling temperature of those two boxes was compared when outside air temperature was the greatest. and control box showed a greater temperature in both cases. Thus it was found that green roof was effective in reducing temperature. As results of heat budget analysis, heat budget of a green roof showed a greater proportion of net radiation and latent heat while heat budget of the control box showed a greater proportion of sensible heat and conduction heat. The significance of this study was to analyze heat budget of green roof temperature reduction. As substrate depth and types, species and seasonal changes may have influences on temperature reduction of green roof, further study is necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.334-340
• /
• 2003

This study was conducted to evaluate the effects of dietary herbal extracts mixture on the growth rate. carcass traits and serological changes in finishing pigs. For the Exp 1, eighty Duroc(Yorkshir(Landrace pigs(81.58$\pm$3.20kg average initial body weight) were used in a 45 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) NCM(NC diet added 0.1% of herbal plant mixture) and 4) PCM(PC diet added 0.1% of herbal plant mixture). Through the entire experimental period, ADG of pigs fed NCM and PCM diets was greater(P<0.08) than that of pigs fed NC diet. There was interaction of ADG(P<0.01) in pigs fed NC diet with herbal plant mixture compared to pigs fed PC diet with herbal plant mixture. ADFI and G/F tended to increase in PC and NCM treatments. However, there were not significantly differences among the treatments. Total protein of serum was improved by supplementation of the herbal plant mixture in NC diet(P<0.04). For the Exp 2. one hundred Duroc(Yorkshir(Landrace pigs(77.36$\pm$2.01kg average initial body weight) were used in a 28 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) PM0.1(NC diet added 0.1% of herbal plant mixture) and 4) PM0.2(NC diet added 0.2% of herbal plant mixture). Through the entire experimental period, ADG tended to increase in PC treatment. However, there was not significantly difference among the treatments. Carcass weight in NC was higher than other treatments(P<0.06). Backfat thickness was higher in pigs fed PC than other treatments. However, there was not significantly difference among the treatments. A grade appearances of carcass tended to increase in pigs fed PM(P<0.09). In conclusion, the results of the experiments suggest that pigs fed PM could be a beneficial growth performance and serogical immunity for finishing pigs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.375-382
• /
• 2006

This study was conducted to investigate the effects of dietary herbal plant mixture on growth performance, blood immunological parameters, fecal VFA and NH3-N concentrations in growing pigs. The dietary treatments were 1) NC (negative control; antibiotics-free diet), 2) PC (positive control; NC diet added 0.16% antibiotic), 3) NCK0.2 (NC diet added 0.2% herbal plant mixture (koppuul??)) and 4) PCK0.1 (PC diet added 0.1% herbal plant mixture (koppuul??)). Eighty crossbred (Landrace×Yorkshire×Duroc) pigs (16.35±0.05kg average initial body weight) were used for 42 days. The pigs were assigned to the treatments according to body weight and each treatment had 5 replicates of 4 pigs per pen in a randomized complete block design. During the whole experimental period, PCK0.1 and PC treatments had significantly higher ADG than NC treatment (P<0.05). Gain/feed of pigs fed PC diet was higher than that of pigs fed NC diet (P<0.05). For blood immunological parameters investigations, white blood cells (WBC) counts and IgG level increased in the pigs fed PC, NCK0.2 and PCK0.1 diets compared to pigs fed NC diet. In addition, higher (P<0.05) serum lymphocyte concentration was found in PCK0.1 treatment compared to NC treatment. NH3-N concentration in pigs fed NCK0.2% diet was lower than that in pigs fed PC and NC diets. There were no significant differences in DM and N digestibilities among the treatments. In conclusion, the results suggested that the dietary additions of herbal plant mixture or antibiotics increase ADG, the concentrations of WBC counts and IgG, lymphocyte, while decrease NH3-N concentration in feces.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.3
• /
• pp.267-274
• /
• 2010

The objective of this experiment was to investigate effects of total mixed ration (TMR) of different nutrition level on milk production in dairy goats (Sannen). Twenty four lactating goats were randomly assigned to one of four TMRs; medium energy-medium crude protein (CP) TMR (control), high energymedium CP TMR (T1), medium energy-high CP TMR (T2) and high energy-high CP TMR (T3). The content of total digestible nutrients (TDN) and CP in the control diet were 67.0% and 13.9%. The TDN content of the high energy TMR was 73.7% and the CP content of the high CP TMR was 15.3%. Milk yield was significantly (P<0.05) higher for T1 ($2,198{\pm}115 ml$) than for T2 ($1,742{\pm}52 ml$) and T3 ($1,984{\pm}90 ml$). But there were no significant differences in milk composition between the treatments. Daily body weight gain was increased in T1 and T3 but reduced in control and T2. The result of the present study showed that dietary energy level supplied more than that of NRC recommendation did not affect milk yield of dairy goats in early lactation but prevented body weight loss.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.12-16
• /
• 2015

This study was carried out to evaluate accurately physical characteristics of total mixed rations (TMR) by investigating the effects of physically effective neutral detergent fiber content on the growth performance and carcass characteristics in fattening steers. Twelve Hanwoo (Bos Taurus coreanae) steers aged 26 months were used in this trial. Steers were offered one of two total mixed ration (TMR) diets - High or Low physically effective neutral detergent fiber (peNDF) content groups-that were differentiated by mixing time. The carcass traits of the experimental animals were evaluated by Korea Institute for Animal Products Quality Evaluation (KAPE) after slaughter. Body weight gain during the experimental period was significantly higher (P<0.05) in the High group ($30.00{\pm}10.27kg$) compared with the Low group ($17.20{\pm}6.34kg$), and daily weight gain was also high in the former. Although there was no significant difference, the carcass weight was higher in the High group ($414.60{\pm}34.28kg$) compared with the Low group ($377.80{\pm}11.97kg$). However, the beef quality grade of the Low group ($1^{++}$) was higher than that of the High group ($1^+$). Increases in body weight gain, daily gain, and carcass weight for the High group were mainly influenced by a high level of dry matter (DM) intake and digestibility; consequently, back-fat thickness increased and the beef quality grade was lowered. Because growth performance and carcass characteristics were affected by the physical traits of the diet, we suggested that proper peNDF content is also needed for fattening steers.