• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.109-115
• /
• 2004

Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in efficiency of cooling system. In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved 2) According as the cyclone inlet pressure increases the efficiency of separation is improved Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.

• Journal of Chest Surgery
• /
• v.36 no.1
• /
• pp.21-25
• /
• 2003

Video-assisted thoracoscopic surgery (VATS) for decortication or debridement in the management of empyema thoracis has increased the available treatment options but requires validation. We present and evaluate our technique and experience with thoracoscopic management of pleural empyema, irrespective of chronicity. Material and Method : VATS debridement or decortication was performed with endoscopic shaver system in 40 consecutive patients presented with pleural space infections. A retrospective review was performed and the effect of this technique on perioperative outcome was assessed. Result : VATS evacuation of infected pleural fluid and decortication was successfully performed in 35 of 40 patients. The mean duration of preoperative symptoms before referral was 23$\pm$1.8 days. The mean duration of hospitalization before transfer was 13.5$\pm$1.5 days. Blood loss was 250 to 200 mL. Intercostal drainage was required for 5$\pm$3 days. The postoperative hospital stay was 5 $\pm$0.7 days. There were no operative mortalities. Conclusion : Video-assisted evacuation of infected pleural fluid and decortication is an effective modality in the management of the fibropurulent stage of empyema. An organized empyema should be approached thoracosco-pically, but may require open decortication.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.215-226
• /
• 2010

The pig slurry leachate was dark brown-colored solution that leaches out of woodchip trickling filter. The purpose of this research was to investigate the effect of pig slurry leachate and byproduct on growth characteristics of leaf lettuce in hydroponics culture. The effects of addition of fish meal, bone meal and crab shell for the growth of leaf lettuce were investigated. Leaf lettuce were grown in each of six combination treatment solutions; slurry leachate, slurry leachate + fish meal, slurry leachate+bone meal, slurry leachate + crab shell and chemical hydroponic solution for lettuce based on EC content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The all of nutrient solution was adjusted 1.5 mS/cm in EC in hydroponics culture. 1. The pH level of leachate of trickling filter was increased and EC decreased gradually during treatment. Pig slurry leachate was low in suspended solids (SS), phosphorus (P), but rich in potassium (K). 2. The plot of slurry leachate (SL) was lowest in the growth characteristics of lettuce. The leaf length and width of lettuce treated with mixture plot of slurry leachate and fish meal (SL + FM) was higher compared with plot in slurry leachate. The chlorophyll reading was reduced in plot treated with slurry leachate, but that in plot of SL+FM was similar compared with control plot. 3. The fresh weight of lettuce showed lowest in the plot treated with slurry leachate. The addition of fish meal increased the yield of comparing plot of slurry leachate, but plots of bone meal and crab shell addition were not significantly difference. The fresh weight of leaf lettuce in plot of SL+FM was 87% as 400.0g compared with control. In conclusion, the mixture solution of pig slurry leachate and fish meal could be used as a nutrition solution of organic lettuce hydroponics.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.236-247
• /
• 1996

The main objective of this study was to evaluate the effectiveness of nutrient solutions, substrates, and nutrient solution concentrations in substrate culture of radish(Raphanus sativus L. var. sativus). Cooper's, Hoagland ＆ Arnon' 5, and Yamazaki's solution were used to determine the most suitable nutrient solution in deep flow culture(DFC). In result, Yamazaki's solution treatment showed better results than Hoagland's and Cooper's solution treatments in leaf length, leaf number, shoot and root fresh weights. Cooper's solution was much worse than others. Root shape index were low as 0.6 in all treatments. The selection of suitable was conducted among 14 kinds of substrates which were used commercially, such as sand, perlite and peatmoss, in substrates culture. Sand was the most proper in radish growth and shortened the growth periods. Sand also showed better results then others in leaf length, leaf number, shoot and root fresh weight. On the contrary, radish growth in peatmoss was the worst. Generally, root shape index was higher in substrate than in DFC. In order to investigate the suitable ionic strength in radish, Yamazaki's solution was treated with EC of 0.5, 1.0, 1.5, and 2.0 mS/cm. Generally radish growth above 1.0 mS/cm concentration was good, and the best result was shown in 1.5 mS/cm. Vitamin C contents were not significantly different in the roots of radish grown under 1.0 mS/cm or more. The highest vitamin C content was shown in 0.5 mS/cm, and so was thiocyanate content. Anthocyanin contents increased with the increase of the ionic strength in nutrient solution. Mineral nutrient contents had no significant statistical differences between the treatments, but potassium content was remarkably high in 1.5 mS/cm.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.283-289
• /
• 2017

The water discharged from dental unit waterlines (DUWLs) is heavily contaminated with bacteria. The development of efficient disinfectants is required to maintain good quality DUWL water. The purpose of this study was to establish a DUWL biofilm model using well-plates to confirm the effectiveness of disinfectants in the laboratory. Bacteria were obtained from the water discharged from DUWLs and incubated in R2A liquid medium for 10 days. The bacterial solution cultured for 10 days was made into stock and these stocks were incubated in R2A broth and batch mode for 5 days. Batch-cultured bacterial culture solution and polyurethane tubing sections were incubated in 12-well plates for 4 days. Biofilm accumulation was confirmed through plating on R2A solid medium. In addition, the thickness of the biofilm and the shape and distribution of the constituent bacteria were confirmed using confocal laser microscopy and scanning electron microscopy. The average accumulation of the cultured biofilm over 4 days amounted to $1.15{\times}10^7CFU/cm^2$. The biofilm was widely distributed on the inner surface of the polyurethane tubing and consisted of cocci, short-length rods and medium-length rods. The biofilm thickness ranged from $2{\mu}m$ to $7{\mu}m$. The DUWL biofilm model produced in this study can be used to develop disinfectants and study DUWL biofilm-forming bacteria.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.233-239
• /
• 2006

This study was carried out to investigate the effect of intra-uterine infusion of lipopolysaccharides (LPS) on uterine involution in dairy cows with retained placenta. The LPS isolated from Bacteroides helcogenes and Fusobaoterium varium was infused at the rate of 100 ug (n=11) and 200 ug (n=11) with 30 ml of phosphate buffer saline in each cow at 20 days post-partum. The cows in conrol group (n=11) with retained placenta were infused with 30 ml phosphate buffer saline in each cow at 20 days postpartum. Cross-sectional ultrasonography was performed at days 40 postpartum to examine uterine involution and exudate in the all dairy cows in study. The cows in control group have shown 45.5, 27.3 and 27.3% gravid horn with less than 30 mm (normal), $31{\sim}50mm$ (medium) and more than 51 mm (large) in diameter. Respective average values of gravid horn diameter in cows treated with LPS 200 ug were noticed 72.7, 18.2 and 9.1%. However, the gravid horn diameter in all the cows treated with 100 ug of LPS was less than 30 mm. The 18.2, 63.6 and 54.6% cows in the control, LPS 100 ug and LPS 200 ug, respectively, have shown no exudate in uterine cavity. However, the respective rates of small amount of exudate retention in uterine cavity were 45.5, 0.0, and 9.1%. Approximately 36.4% cows in all 3 treated groups have shown minute quantity of exudate. In conclusion, the LPS intra-uterine infusion promoted postpartum uterine involution in dairy cows with retained placenta.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.619-624
• /
• 2012

In this study, we demonstrated the operation of an electroosmotic pump with cylindrical porous glass frits and evaluated its long-term operation. The performance of this electroosmotic pump was characterized in terms of maximum flow rate, current, and pressure using deionized water and 1 mM borate buffer. The maximum flow rate, current, and pressure linearly increase with voltage. The maximum flow rate is normalized by the pumping area and voltage for comparison of the performance between the electroosmotic pumps with cylindrical and planar frits. The normalized maximum flow rate of the cylindrical-type pump is higher than that of the planar-type pump because of their different geometries. The cylindrical-type electroosmotic pump has five times better performance than the planartype electroosmotic pump for a given pump package volume. It can operate stably for over 3 hours.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.183-188
• /
• 2017

This study deals with $de-SO_X$ and $de-NO_X$ process of a wet scrubber for small size ship engines. The experiment was conducted according to the E3 mode of the $NO_X$ technical code. In order to discharge the sulfur containing flue gas, ditertiarybutyldusulfide was added to the diesel fuel to increase the sulfur content. NO gas, which occupies most of the nitrogen oxides in the exhaust gas, was oxidized into $NO_2$ and absorbed by a wet scrubber. The developed equipment of this work achieved 100% of removal efficiency for highly soluble $SO_2$ gas in an aqueous solution.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.63-71
• /
• 2017

In this study, washing parameters such as washing time, agitation velocity, and cycles were optimized for high surface area of the activated carbon (AC) by KOH activation. Even though AC with high surface area showed at higher washing efficiency, over 90% on washing efficiency was regulated by the intra-particle diffusion due to high tortuosity of the pore structures on AC. In addition, we can obtain $K_2CO_3$ through the evaporation from the wastewater and use it for chemical activation of AC. The AC with $K_2CO_3$ activation has specific surface area values of $2,219m^2/g$ equally that of KOH activation. Considering that $K_2CO_3$ is an effective alternative as a KOH, our results demonstrated that the process by recycling wastewater on AC production could be applicable for near-zero wastes.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.21-21
• /
• 2012

수송용 산업의 하나인 국내 조선업계는 2008년 말 이후 세계 조선경기 불황 속에서도 2009년 451억달러, 2010년 491억달러의 사상최대 수출액을 달성한 바가 있고 세계 조선사 순위에서는 1위에서 5위까지 한국 조선소 등이 우위를 차지하고 있다. 그러나 개별 기업 경쟁력은 우위에 서있지만 중국과의 격차가 많이 좁혀지고 있어 안심할 수 없는 상황이다. 특히 최근에는 탄소배출량이 적은 친환경 선박의 제조가 선박업계 전반의 화두로 대두되고 있다. 이를 위해 다양한 시도가 시도되고 있는데 그중에 하나가 선박의 경량화이다. 금속외장 전선은 선박 무게의 10~13%를 차지하고 있고 전체 사용 전선의 30~40%를 차지하고 있어 선박에서의 금속외장 전선의 무게를 줄이기 위한 연구가 필요한 실정이다. 또한 조선산업 뿐만 아니라 자동차 분야에서도 금속 외장전선이 많이 사용되고 있으며, 자동차의 연비 향상을 위한 경량화 연구가 더욱 절실한 상황이다. 본 연구에서는 수송용으로 사용되는 전선의 금속외장을 경량 고강도 섬유를 활용한 하이브리드 wire로 대체하기 위한 편조 기술 및 편조 장치를 개발하기 위한 설계 및 기초연구를 수행하였다. 초경량 고강도 섬유 Armor의 제조기술 및 최적 공정 개발을 위한 연구로서 경쟁사 샘플에 대한 분석을 실시하였고, 사용된 섬유의 성분 분석 및 물성시험을 수행하였다. 또한 원형직기 개발을 위한 구조부 설계를 위해 ANSYS해석을 수행하고 저신율 고강도인 아라미드의 이징모션 시스템 개발을 위한 연구를 수행하였으며 개구 형성방법을 설계하였다. 그리고 초경량 고강도 hybrid 케이블 아라미드 편조 표면 및 내부 가교에 의한 가공 기술을 연구하였다. 아라미드 섬유의 발수성 향상을 위한 코팅재료 선정을 위한 연구를 수행하였고, 자외선 경화공정에서 조건별 데이터를 정립하여 솔루션을 제공하고자 한다.