• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.149-155
• /
• 2018

In this paper, we used ET(Electrical Tomography) for earth resistivity image reconstruction of vertical multi layer underground model. The earth resistivity is analyzed generally as the parallel multi-layer model, however possibly there happens vertical layer model. Here to find the best electrode array in case of vertical layer underground model, Wenner, Schlumberger, and Dipole-dipole electrode arrays, which are well known electrode arrays used in ET, have been tested. And Gauss-Newton algorithm is used in ET inversion. RMS error analysis shows that Wenner electrode array is best in imaging.

• Journal for History of Mathematics
• /
• v.31 no.6
• /
• pp.273-289
• /
• 2018

The KaiFangFa開方法 of traditional mathematics was completed in ${\ll}$JiuZhang SuanShu九章算術${\gg}$ originally, and further organized in Song宋 $Yu{\acute{a}}n$元 dinasities. The former is the ShiSuoKaiFangFa釋鎖開方法 using the coefficients of the polynomial expansion, and the latter is the ZengChengKaiFangFa增乘開方法 obtaining the solution only by some mechanical numerical manipulations. ${\ll}$SanHak JeongEui算學正義${\gg}$ basically used the latter and improved the estimate-value array by referring to the written-calculation in ${\ll}$ShuLi JingYun數理精蘊${\gg}$. As a result, ZengChengKaiFangFa was more refined so that the KaiFangFa algorithm is more consistent.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.185-192
• /
• 2002

We made a study of 3-D migration which could precisely image data of GPR (Ground Penetrating Radar) applied to NDT (Non-Destructive Test) field for the inspection of structural safety. In this study, we obtained 3-D migrated images of important targets in structuresurvey (e.g. steel pipes, cracks) by using 3-D Kirchhoff prestack depth migration scheme developed for seismic data processing. For a concrete model consisting of steel pipe and void, the targets have been well defined with opposite amplitude according to the parameters of the targets. And migrated images using Parallel-Broadside array (XX configuration) have shown higher resolution than those using Perpendicular-Broadside array (YY configuration) when steel pipes had different sizes. Therefore, it is required to analyze the migrated image of XX configuration as well as that of general YY configuration in order to get more accurate information. As the last stage, we chose a model including two steel pipes which cross each other. The upper pipe has been resolved clearly but the lower has been imaged bigger than the model size due to the high conductivity of the upper steel.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.121-131
• /
• 2009

In recent years, microtremor array observations have been used for estimation of shear-wave velocity structures. One of the methods is the conventional spatial autocorrelation (SPAC) method, which requires simultaneous recording at least with three or four sensors. Modified SPAC methods such as 2sSPAC, and linear array methods, allow estimating shear-wave structures by using only two sensors, but suffer from instability of the spatial autocorrelation coefficient for frequency ranges higher than 1.0 Hz. Based on microtremor measurements from four different size triangular arrays and four same-size triangular and linear arrays, we have demonstrated the stability of SPAC coefficient for the frequency range from 2 to 4 or 5 Hz. The phase velocities, obtained by fitting the SPAC coefficients to the Bessel function, are also consistent up to the frequency 5 Hz. All data were processed by the SPAC method, with the exception of the spatial averaging for the linear array cases. The arrays were deployed sequentially at different times, near a site having existing Parallel Seismic (PS) borehole logging data. We also used the imaginary part of the SPAC coefficients as a data-quality indicator. Based on perturbations of the autocorrelation spectrum (and in some cases on visual examination of the record waveforms) we divided data into so-called 'reliable' and 'unreliable' categories. We then calculated the imaginary part of the SPAC spectrum for 'reliable', 'unreliable', and complete (i.e. 'reliable' and 'unreliable' datasets combined) datasets for each array, and compared the results. In the case of insufficient azimuthal distribution of the stations (the linear array) the imaginary curve shows some instability and can therefore be regarded as an indicator of insufficient spatial averaging. However, in the case of low coherency of the wavefield the imaginary curve does not show any significant instability.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.353-356
• /
• 2002

심근 경색 및 뇌졸중 등 혈관과 관련된 질환들의 진단 및 치료의 목적으로 미세 크기의 원형 배열 초음파 트랜스듀서가 사용되고 있다. 원형 배열 초음파 트랜스듀서는 종래의 선형 배열 트랜스듀서에 비해 반경 방향의 입체적 진단을 가능케 하고 높은 감도 및 해상도를 구현할 수 있는 장점을 가진다. 본 연구에서는 이러한 원형 배열 초음파 트랜스듀서의 개발을 위하여, 유한요소법 및 이론적인 해석으로 트랜스 eb서의 방사특성을 분석함으로써 무지향성을 이루기 위한 트랜스듀서 내 진동자의 최적 규격을 설정하였다. 나아가 해석 결과에 따라 직경이 약 10mm정도가 되는 알루미나 $Al_2O_3$ 튜브에 32개의 진동자가 원형으로 배열된 트랜스 듀서 시작품의 제작 및 방사특성 측정 실험을 수행함으로써 설계 결과의 타당성을 검증하였다.

• Korean Journal of Environment and Ecology
• /
• v.21 no.4
• /
• pp.356-365
• /
• 2007

This study was conducted to evaluate the changed vegetational community structure according to vegetational succession in Chiaksan National Park of Korea by applying ordination and classification method of floristic composition along with the actual vegetation by correlation. As for the ratio of actual vegetation, Mongolian oak forest(33.1%) was the highest, followed by mixed forest(16.2%), Japanese larch forest(15.6%), deciduous broad-leaved forest(14.7%), red pine forest(11.1%), Korean pine forest(2.3%) and Pitch pine forest(0.1%), respectively. The vegetation was classified into Acer pseudosieboidianum-Quercus mongolica community, Cornus controversa-Carpinus cordata community, Quercus sonata community, Pinus densiflora community and afforestation. The Acer pseudosieboldianum-Quercus mongolica community-a subordinately ranked community-was divided into Carpinus laxiflora-Sassa borealis community, Fraxinus rhynchophylla community and Symplocos chinensis for. pilosa-Carex siderosticta community. The results of community classification using by ordination and classification method of floristic composition were similar to each other. The vegetational succession, with the combination of Quercus mongolica, Acer pseudosieboldianum and Rhododendron schlippenbachii, was predicted to form a climax forest from above the hillside.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.371-378
• /
• 2005

The objective or this paper is to measure the in-plane vibration intensity of a beam with a damped end that means the magnitude and direction of vibration power. Three experimental methods have been implemented to measure the in-plane vibration intensity over the beam. The first method is the accelerometer array method using two accelerometers. The second method is the frequency response function method using the only one accelerometer. The third method is the reference accelerometer method using a fixed reference accelerometer and another moving accelerometer. Those methods have been used to measure the spatial distribution of in-plane vibration intensity over the beam. The results obtained with those methods have been compared with each other. The results have been compared with an input power. It showed that the frequency response function method and the reference accelerometer method as well as the accelerometer array method can be effectively used to measure the in-plane vibration intensity in beams.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.51-61
• /
• 2012

In this research, we have analyzed the trend of radiation pattern variation in relation to the change of design variables such as source interval and source number for conformal array transducers arranged in equi-angle, equi-interval, and geodesic dome forms. Through statistical multiple regression analysis of the results, we derived functional forms of the side lobe level and the beamwidth in terms of the design variables. Futhermore, the structure of the array transducer was optimized to achieve the smallest side lobe level while satisfying the requirements on beam width by the GA (genetic algorithm) method. Based on the optimized results, we have determined the equi-interval form as the optimal array geometry among the three conformal array geometries.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.201-203
• /
• 1999

음성합성에서 자연스러운 합성음을 생성하기 위하여 표준 발음법을 페트리넷 근저행렬로 모델링하는 방법으로 표준 발음법을 음가 생성 규칙으로 만들 수 있다. 본 논문은 페트리넷으로 모델링된 음가 생성 규칙의 크기를 줄이는 방법을 제안하고 구현하였다. 압축하기 전의 음가 생성 테이블의 크기는 719*107의 2차원 배열이었으며 구현된 시스템으로 압축한 결과 41*40의 2차원 구조체 배열로 압축되었다.