• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1025-1028
• /
• 2008

Using of maintenance system for gate bridge algorism, We made out algorism and engine for prediction of life cycle by neutralization, freezing-thawing and damage from sea wind. To objective of this system, user can use easily with maintenance system for gate bridge. Also, to improve of maintenance efficiency, web-program made out by superannuated evaluation and analysis of field exposure data. To develope web-program, we framing structure design of database, which is adapted to method of maintenance, repair, and reinforcing

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.41-50
• /
• 1995

In situ clay soils with Ko condition have anisotropic characteristics, varying the response according to the principal stress direction upon loading. But because of their practicality and simplicity, consolidated isotropic undrained compression tests are commonly used in practice to determine the behavior of cohesive soils. In this study to investigate the anisotropic characteristics and the effects of consolidation stress states on the response of normally consolidated clay soils during shearing, triaxial compression and extension tests after consolidating the undisturbed clay soil samples, which are obtained as a block sample to normalized consolidation states under isotropic or Ko state, were carried out. As a result of tests, the anisotropy of the undrained strength was confirmed. Comparing the soil responses between isotropic and Ko consolidation, the undrained strength by isotropic consolidation is overestimated because of its higher mean consolidation pressure. And isotropic consolidation reduces the anisotropy of soil response and influences on the stress-strain behavior and pore pressure response because the animotropic soil structure is partially collapsed during isotropic consolidation process. Also, OCR in overconsolidated soils is decreased by isotropic consolidatiorL Friction angle in eztension is higher than that in compression, but regression analysis shows that friction angle with cohesion in extension is almost the same as that without cohesion in compresslon.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.4
• /
• pp.90-100
• /
• 2003

본 연구는 기존 건축물 옥상녹화에 이용 가능한 저토심 옥상녹화 시스템 을 연구하고 개발하고자 수행되었다. 연구목적을 달성하기위해서 시스템의 개념적 모델이 선행 연구로부터 유추되었고 개념적 모델로부터 실험을 위한 시스템들이 제안되었다. 건축물 옥상 위에 설치된 이 시스템들에서 기린초의 생육에 대하여 인공배지 종류, 토심, 그리고 배수 형태의 효과들이 2002년 4월 3일부터 10월 18일까지 연구되었다. 인공배지 종류는 단용과 혼용이고, 토심은 5cm, l0cm,그리고 15cm이며, 배수 형태는 저수$.$배수형과 배수형으로 하였다. 여기서, 인공배지 단용은 폐유리 미분 100에 발포제를 1∼2정도 첨가하고, 착색제를 1정도 첨가한 후, 6∼8$^{\circ}C$/min로 승온하여 750∼85$0^{\circ}C$의 온도에서 발포시킨 다공질 유리를 수냉식으로 급랭하고, 분쇄기로 이송하여 l0mm이하로 분쇄하고 입도를 조절하여 얻어진 다공질 유리 파쇄물과 수피를 부피 비 6:4로 혼합하여 조성된 것이며 인공배지 혼용은 인공배 지 단용에 양토(모래 46%, 미사 40%, 점토 14%)를 부피비 5:5로 혼합하여 조성된 것이다. 피복면적, 지상부와 지하부의 생체중과 건물중, 그리고 시각적 질을 조사하였다. 각 변수들은 던칸의 다중범위 검정으로 통계처리 하였으며 처리들간의 유의수준은 5%였다. 그리고 기존 건축물 옥상에 대한 과부하의 위험을 피하기 위해서 각 시스템의 중량이 평가되었다. 그 결과를 요약하면 다음과 같다. 실험기간 중에 피복면적에 대한 배수 형태의 효과는 유의성 있는 차이를 나타내지 않았다. 인공배지 혼용의 피복면적은 인공배지 단용의 것보다 통계적으로 유의성 있게 높았다. 토심 5cm처리의 피복면적은 나머지 처리들의 피복면적보다 통계적으로 유의성 있게 낮았다. 토심 l0cm처리와 토심 15cm처리는 통계적으로 유의성이 없는 것으로 나타났다. 지상부와 뿌리의 생체중 및 건물중과 시각적 질에 대한 처리들의 효과는 피복면적에 대한 것과 유사하거나 동일하였다. 결과적으로, 기린초의 생육은 인공배지 단용보다 인공배지 혼용에서 더 높았고, 토심 10∼15cm에서 더 높았으며, 배수 형태에서는 뚜렷한 차이를 나타내지 않았다. 이 결과를 토대로, 기존 건축물 옥상에 적용 가능한 시스템의 허용하중과 기린초의 생육을 동시에 고려해볼 때, 저토심 옥상녹화 시스템 은 인공배지 종류에서는 혼용이, 토심은 10cm, 그리고 배수형태는 배수형이 적합하다고 보았다. 제안된 조건으로 조성된 시스템은 인공배지가 포장용수량상태일 때 그 중량이 약 115kg/$m^2$정도로 나타났다.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.173-182
• /
• 2018

The precipitation and phase transformation processes of iron minerals in acid mine drainage have a great influence on the behavior of trace elements in drainage. However, it is not easy to accurately trace these processes in natural environments, and therefore, most studies have carried out in the laboratory to obtain the information on the precipitation and transformation of those minerals. In this study, the precipitation of minerals and the changes of trace elements in drainage water were investigated at different pH values in actual acid mine drainage collected from the Dalsung mine. The amount of some precipitated minerals was not enough for the mineral identification. However, from the minerals identified, amorphous minerals were formed first, and then goethite was precipitated probably from schwertmannite. When the pH of the sample was high (10), amorphous phases of minerals were still observed at even high pH (pH 10). With increasing time, the pH values decreased by precipitation and transformation of minerals. All the elements showed low concentrations at high pH (8, 10), which might be due to the precipitation of minerals at high pH and the effect of surface charge, and the concentrations of elements gradually increased with time. In the case of sulfur, it also increased in water due to the transformation of schwertmannite to goethite.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1989.07a
• /
• pp.163-172
• /
• 1989

강우로 인한 급경사면의 흐름 해석은 지배방정식인 연속방정식과 운동량 방정식에 의해 수치적으로 해석된다. 이에대한 해석 방법에는 수문학적인 방법과 수리학적인 방법이 있는데, 본 연구에서는 세인트 베난트 방정식을 초기 및 경계조건에 맞게 푸는 수리학적인 방법을 이용하였고, 일반적인 완경사면에서 그 영향이 작아 무시되었던 경사의 영향을 고려한다. 수치해석 과정은 지배방정식에 무차원 매개변수를 도입하여 6점 음해법을 이용하여 해석하였다. 수치실험은 마닝(Manning)의 조도계수 n을 변화시키면서, 각각 검사에서 강우에 의한 평형상태에 도달한 이후의 수심과 유량, kinematic flow 수, 후르드 수, 평형상태 도달시간등 변수 상호간의 관계를 고찰하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1997.10a
• /
• pp.86-89
• /
• 1997

해안의 자연지형은 흐름의 변화에 대해서 자신의 특성을 조절하는 능력을 가지고 있다. 흐름의 변화는 자연적 변화와 인위적 변화로 구분할 수 있다. 자연적 변화는 해일, 조류, 취송류 등에 의한 변화가 있다. 또한, 댐 방류량 조절 및 온배수 제트 등은 해안 흐름의 변화를 야기하며, 항만 등 수공구조물의 건설에 의해 흐름이 인위적으로 변화된다. 흐름이 변화하게 되면 이전의 동적 평형상태에 있던 해안은 수리학적 혹성, 유사특성의 변화를 초래하여 평형상태는 깨지게 된다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.173-175
• /
• 2000

도시기상의 원인으로는 지표면 상태의 변화, 인공구조물과 인공열 방출을 들 수 있으며 그 외 오염물질 또한 하나의 원인이다. 도시의 낮은 함수률의 지표면 증가는 증발산 영역을 감소시켜 결과적으로 잠열방출을 감소시키고 현열을 증가시킨다(Tapper, et. al., 1981). 또한 도시의 배수시설은 유입된 강수의 흐름을 시골보다 짧은 기간 머무르게 하여 도시에서 낮은 절대 습도를 가지게 한다. (중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.421-431
• /
• 2023

Sewer deterioration models can offer important information on prediction of future condition of the asset to decision makers in their implementing sewer pipe networks management program. In this study, Markov chain model was used to estimate sewer deterioration trend based on the historical structural condition assessment data obtained by CCTV inspection. The data used in this study were limited to Hume pipe with diameter of 450 mm and 600 mm in three sub-catchment areas in city A, which were collected by CCTV inspection projects performed in 1998-1999 and 2010-2011. As a result, it was found that sewers in sub-catchment area EM have deteriorated faster than those in other two sub-catchments. Various main defects were to generate in 29% of 450 mm sewers and 38% of 600 mm in 35 years after the installation, while serious failure in 62% of 450 mm sewers and 74% of 600 mm in 100 years after the installation in sub-catchment area EM. In sub-catchment area SN, main defects were to generate in 26% of 450 mm sewers and 35% of 600 mm in 35 years after the installation, while in sub-catchment area HK main defects were to generate in 27% of 450 mm sewers and 37% of 600 mm in 35 years after the installation. Larger sewer pipes of 600 mm were found to deteriorate faster than smaller sewer pipes of 450 mm by about 12 years. Assuming that the percentage of main defects generation could be set as 40% to estimate the life expectancy of the sewers, it was estimated as 60 years in sub-catchment area SN, 42 years in sub-catchment area EM, 59 years in sub-catchment area HK for 450 mm sewer pipes, respectively. For 600 mm sewer pipes, on the other hand, it was estimated as 43 years, 34 years, 39 years in sub-catchment areas SN, EM, and HK, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.704-710
• /
• 2012

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. This study was conducted to evaluate soil physical characteristics by drainage improvement in poorly drained sloping paddy field. The results showed that subsurface drainage by Pipe Drainage improves the productivity of poorly drained soils by lowering the water table and improving root zone soil layer condition. In an Pipe drainage plot, soil moisture drained faster as compared to the other drainage methods. Infiltration rate showed high tendency to Piper Drainage method about $20.87mm\;hr^{-1}$ than in Open Ditch method $0.15mm\;hr^{-1}$. And Similarly soil water and degree of hardness and shear strength phase of soil profile showed a tendency to decrease. From the above results, we found that when an subsurface drainage was established with at 1m position from the lower edge paddy levee of the upper field in sloping poorly drained paddy fields Pipe Drainage was the most effective drainage system for multiple land use.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.61-75
• /
• 2003

Comprehensive review on the determination of critical state parameters in sandy soils from standard triaxial testing was performed to facilitate the application of critical state soil mechanics to the shear behavior of sandy soils. First, semantic differences in literature were clarified, inferring that critical state should be considered as the ultimate state at large deformation. Second, the characteristics of critical state parameters were discussed, and also the uniqueness of critical state line and the sensitivity of quasi-steady state condition were verified in relation to initial state, fabric, loading condition, and drainage condition. Third, as an example, the critical state soil mechanics was applied to evaluate the post-liquefaction shear strength, i.e. the reliable ultimate shear strength in liquified soils, in terms of critical state parameters.