• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.437-445
• /
• 2018

IMO (International Maritime Organization) has been strengthening the regulations of ship emission gas such as sulfur oxides (SOX), nitrogen oxides (NOX) and carbon dioxides (CO2) to protect the marine environment. Especially, ECA (Emission Control Area) has been set and operated in the USA and US. As a countermeasure against these environmental regulations, the demand for environmentally, friendly and highly efficient vessels has led to a growing interest in technology related research with respect to electric propulsion systems capable of reducing exhaust gas. Container ships were excluded from the application coverage of the electric propulsion systems for reasons of operation at economical speed. However, in the future, the need for electric propulsion system is expected to rise, because it is easy to monitor and control so that it can be an applicate to smart ship which are represented by fourth industrial revolution technology. In this study, research was carried out to design a generator and battery capacity through the load analysis of the 6,800TEU container ship to apply the electric propulsion system of the container ship. A capacity design based on the load analysis has an advantage that the generator can be operated in a high efficiency section through the load distribution control using the battery.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.397-404
• /
• 2012

In this research, a numerical study was carried out on the mixing and flow characteristics of a vane-type static mixer for the reduction of $NO_x$ in the SCR systems from the diesel exhaust environments. The mixer was located at a distance of 57 times the pipe diameter away from the inlet. The analyses were performed by changing various parameters such as vane angles, blockage ratio, and location of the vane. Flow characteristics through the mixer were characterized by the uniformity index, swirl number, and pressure drop. The results show that uniformity index, pressure coefficient and swirl number are substantially influenced by the vane angle, blockage ratio and position of the vane of the mixer. In particular, the swirl number was increased when the vane was located near the pipe wall, or the vane angle was increased or scale was extended.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.23-28
• /
• 2011

The engine ground and altitude tests were carried out to investigate the effect of jet fuel alteration on the performance of a small turbojet engine. JP-S was supplied 8% higher than JP-8 by fuel metering system at the same command. The employment of JP-S showed the similar starting characteristic to that of JP-8, however, difference in the ignition time and acceleration rate of engine speed due to the difference of fuel flow rate by fuel metering system was observed. In spite of jet fuel alteration, the test results yield the similar steady-state engine performance in net thrust, air flow, exhaust gas temperature, etc. On the other hand, the fuel consumption of JP-S increased by 5 % compared with that of JP-8. In point of specific fuel consumption (SFC), SFC of JP-S was approximately 1.1~2.6 %, 5 % higher than that of JP-8 in ground and altitude tests respectively at the same thrust.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.613-619
• /
• 2016

A pneumatic control valve performs a major role in controlling the flow of a system or the level of a key tank in many power plants, and its performance should be guaranteed during the plant's lifetime. Its operation starts by supplying air to the pneumatic actuator or by exhausting the air from the actuator. To control the valve position, the amount of air supply or exhaust is adjusted by a control loop where various accessaries are equipped. In this paper, air leakage in the air supply line, changes in the valve packing force, and false adjustments of zero and the span of the positioner are simulated and analyzed using a 2-in pneumatic valve with a position control loop including an I/P converter and positioner, where the valve position is controlled within ${\pm}2%$ of the control pressure at 67% opening position.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.410-415
• /
• 2010

The engine ground and altitude tests were carried out to investigate the effect of jet fuel alteration on the performance of a small turbojet engine. JP-S was supplied 8% higher than JP-8 by fuel metering system at the same command. The employment of JP-S showed the similar starting characteristic to that of JP-8, however, difference in the ignition time and acceleration rate of engine speed due to the difference of fuel flow rate by fuel metering system was observed. In spite of jet fuel alteration, the test results yield the similar Steady-State engine performance in Net thrust, Air flow, Exhaust Gas Temperature, etc. On the other hand, the Fuel consumption of JP-S increased by 5 % compared with that of JP-8. In point of Specific Fuel Consumption (SFC), SFC of JP-S was approximately 1.1~2.6 %, 5 % higher than that of JP-8 in ground and altitude tests respectively at the same thrust.

• Smart Media Journal
• /
• v.12 no.3
• /
• pp.120-128
• /
• 2023

There are various ICT technologies continuously being developed to reduce damage by industrial accidents. And research is being conducted to minimize damage in case of industrial accidents by utilizing sensors, IoT, big data, machine learning and artificial intelligence. In this paper, we propose a design method for a smart device capable of multilateral communication between devices and smart repeater in the communication shaded Areas such as closed areas of industrial sites, mountains, oceans, and coal mines. The proposed device collects worker's information such as worker location and movement speed, and environmental information such as terrain, wind direction, temperature, and humidity, and secures a safe distance between workers to warn in case of a dangerous situation and is designed to be attached to a helmet. For this, we proposed functional requirements for smart devices and design methods for implementing each requirement using sensors and modules in smart device. And we derived evaluation items for performance evaluation of the smart device and proposed an evaluation environment for performance evaluation in mountainous area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.232-232
• /
• 2023

고속도로 및 편의시설 건설로 불투수층의 면적이 증가하여 강우 시 고속도로 및 편의시설에서 발생하는 오염원에 의한 하천의 수질 영향도 커지고 있다. 특히 휴게소에서는 자동차의 급가속, 급감속으로 더욱 많은 분진과 오염물질이 발생할 수 있으며 타이어 마모 입자, 자동차 배기가스, 중금속 및 오일류 등이 휴게소나 도로 지표에 집적되어 있다. 이렇게 발생한 오염물질은 우기에 강우와 함께 불투수면을 침투하지 못하고 배수로를 통해 유출되어 인근 하천의 수생태 및 토양의 주요 오염원으로 작용하고 있다. 이에 따라 고속도로 및 인근 휴게소의 비점오염 저감대책이 필요하며 효율적인 비점오염원 저감을 위해 장기적인 모니터링, 지속적인 자료 수집 및 분석이 필요하다. 본 연구에서는 강원지역 고속도로 및 인근 휴게소에서 강우 시 강우유출수 모니터링을 통해 강우유출수 유량가중평균농도 (Event Mean Concentration) 산정하고 강우유출수 수문곡선 (hydrograph)을 작성하였다. 또한 강우사상에 따른 분석항목별 초기세척효과(First Flush Effects)와 오염부하량을 산정하였다. 추가적으로 차량 기인 입자를 확인하기 위해 μ-FT-IR 현미경 분석 실험을 하였다. 모니터링 장소는 휴게소 및 고속도로 일원이며, 모니터링은 선행무강우일수 2일 이상, 강우량 10mm 이상일 때 실시하였으며 2022년 6월부터 10월까지 총 4회 실시하였다. 모니터링 결과 타이어 및 브레이크 패드 마모와 관련된 중금속인 Zn, Cu, Pb 등의 중금속이 높게 분석되었으며 이러한 중금속의 오염부하량 역시 높게 산정되었다. 강우유출수 수문곡선에서 강우 초기 오염물질의 세척효과가 나타났다. MFFn 산정 결과 강우 30% 구간에서 초기세척효과를 보였다. μ-FT-IR 현미경 분석 결과 PE (Polyethylene)가 가장 많이 검출되었고 PP (Polypropylene), PS (Polystyrene) 순으로 검출되었다. 이러한 강우유출수 모니터링 데이터는 향후 고속도로 휴게소 및 고속도로 주변 오염저감 시설 설치 및 사회적 동참을 위한 타당한 근거 확보를 위한 기초자료로서 제공될 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.962-969
• /
• 2013

This study used Computational Fluid Dynamics(CFD) to assess the properties of the air current inflow and the flow velocity distribution in the fume hood. In order to verify the effect of improvement, it was also predicted the characteristics of the flow pattern in case the hood face is structurally improved. The assessment of the capture velocity with the existing fume hood confirmed maximum 23 to 30% difference as compared to the root mean square (RMS). And the hood face showed great difference in flow velocity, with the flow velocity in the upper part is 58 to 68% faster than that in the lower part of the hood. So, as a result of the improvement of the hood designed to maintain a steady exhaust at the hood face (that is, installing a baffle on the inner wall and designing the slot type face), a difference of maximum 7% as compared to RMS appeared while maximum 12% differentiation in flow velocity through sections was predicted, showing mitigation of much of the difference in control velocity as compared to the previous structure.

• Journal of Aquaculture
• /
• v.22 no.1
• /
• pp.100-104
• /
• 2009

This study was conducted to evaluate the effect of dietary supplementation of paprika powder as carotenoid source with three different zooplankton on carotenoid deposition and skin pigmentation of rose bitterling Rhodeus ocellatus. Two replicate groups of fish (initial average weight 0.8 g) were fed the five experimental diets containing 5% paprika (P5) and mixture of 5% paprika with 3% three zooplankton of water flea Moina macrocopa (P5M3), Artemia nauplius Artemia sp. (P5A3) and rotifer Brachionus plicatilis (P5R3) and without supplementation of carotenoid source (Con) for 10 weeks. Survival of fish among the treatments was not affected by dietary supplementation. Total carotenoid contents of whole body in fish fed the diets containing 3% zooplankton was higher than that of fish fed other diets. Especially, the highest total carotenoid contents of whole body was observed in fish fed the P5A3 diet. Similarity, Lightness, $a^*$ and $b^*$ values of the fish fed the diets containing 3% zooplankton tended to be higher than that in fish fed control and P5 diets. The apparent color intensity of skin and fin in fish fed the diets containing paprika with Artemia nauplius and rotifer was better than those of fish fed other diets. The results of this study suggest that dietary supplementation of paprika with Artemia nauplius and rotifer can improve skin pigmentation of rose bitterling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.35-42
• /
• 2019

Risk assessment and analysis for a medium-to-small sized chemical plant that manufactures a polyester resin by the process of batch-type condensation reaction was conducted using K-PSR technique which is one of the risk assessment methods used to implement the Process Safety Management System (PSM). K-PSR is a risk assessment technique developed by KOSHA to compensate for difficulties caused by the lack of infrastructure of medium-to-small sized chemical plants in the re-evaluation. To apply the K-PSR technique, the entire process of a selected chemical palnt was classified in two review sections, i.e., the condensation reaction process and the dilution/filtration process, and the potential risks of the process about these review sections were identified and classified based on the four guide-words (release, fire.explosion, process trouble, and injury). As the results of the research, refer to recommend of risk rating has been confirmed that non-destructive testing of old facilities and the preparation of LOTO procedures for the electrical equipments are necessary as specific measures to prevent the risk of release and fire.explosion. It was also shown that pressure gauges and thermometers should be installed on the hot-oil supply piping to minimize the process trouble, and exhausting hood should be installed to prevent potential injury.