• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.3
• /
• pp.255-261
• /
• 2018

High power trends in the diesel engines due to engine downsizing do not provide noise attenuation that can be satisfied with the performance of the existing silencer on account of high frequency increases in the exhaust noise. This study improves the attenuation performance of the exhaust silencer of the diesel engine and suggests silencer structure that performs best attenuation performance, especially at the high frequency range in the exhaust noise. It proposes dual silencer structure with an average attenuation performance of 6.4 dB and a maximum of 10.7 dB in the high frequency range (over 500 Hz), and analyzes its characteristics compared with the existing silencer. The performance analysis is performed according to 'Measurements on silencers in situation-ISO 11820:1996 Acoustics' and describes the results of comparative analysis with the existing silencer.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.1049-1058
• /
• 1997

To verify the Finite Element Method(FEM) model of an Exhaust System, Frequency Response Function(FRF) is utilized. Up to now, generally, comparisons of natural frequencies and mode shapes of the Exhaust System between numerical analysis and experimental results are adopted to prove completion of the FEM model. However, the comparisons of natural frequencies and mode shapes are not sufficient to have the perfect FEM model of the Exhaust system. Instead of these comparisons. FRF method is introduced for the more accurate FEM model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.5
• /
• pp.42-51
• /
• 2000

The performances of the simple expansion, perforated tube, and conical-connector type as an exhaust muffler are shown in this study. Applying a model in which the method of four-pole parameter is used makes theoretical estimation of the insertion loss. Experiment is performed for the measurement of the insertion loss under four cases according to the variation of the tail pipe length. By comparing the theoretical prediction with the experimental results, the validity of the modeling using the method of four-pole parameter is verified. The personal computer simulation programs for the above mentioned theory on the muffler design have been developed and exhaust sound level measurements have been carried out for simple expansion muffler, conical-connector muffler, perforated tube mufflers and the combined type of conical-connector and simple expansion muffler. The measured results for attenuation characteristics of noise for each muffler are compared with the computed theoretical results to verity the confidence and applicable limits of the theoretical equation derived.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1148-1150
• /
• 2002

The exhaust system could be a dominant acoustical source in the passengers vehicle. It would be very important to obtain the acoustically good exhaust system, in order to control the cabin interior sound in automotive. In order to obtain the acoustically good exhaust system in automotive, many kinds of exhaust system should be measured, and simultaneously those results should be compared by the sound quality parameters. In this paper, in order to develop the methodology determining sound quality parameters, acoustic simulator is introduced, combining the time domain analysis and convolution analysis. As an example to verify the reliability of this method, several kinds of measurements are carried out, and the acoustically good exhaust system is selected, based on this proposed method.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.21-26
• /
• 1984

내연기관은 일찍이 군용과 특수용도는 물론, 최근 서민생활에 직결되어 널리 사용되고 있으며, 일상생활의 필수기계가 되어 놀랄만한 수의 엔진이 생산, 사용되기에 이르렀다. 그러나 한편으 로는 그것을 사용함으로서 사람들에게 해를 준다는 문제가 발생하였다. 특히 주위 사람들의 건 강을 해칠 우려가 있는 유해성분을 포함한 가스의 배출, 또는 소음의 발생이 큰 사회적 문제가 되어 그 방지대책이 종래의 성능향상에 대신하여 지상명제로서 연구 개발되고 있다. 이에 대한 대책은 일반적으로 엔진의 가격과 성능을 희생시키는 것은 불가피하지만, 그것은 최근 세계적인 위기로 불리는 에너지와 기타 자원의 절약과 상용할 수 없으므로 이러한 공해와 자원이 양 립할 수 있는 방향으로의 새로운 내연기관 연구가 강력하게 요망되고 있는 것이 현상태이다. 엔진이 인체에 해를 줄 가능성이 있다는 것은 이전부터 알고 있던 바이다. 예를 들면 좁은 실 내나 터널중에서 운전하면 많은 량의 산소를 소비하기 때문에 단시간에 산소가 부족하게 될 뿐만 아니라, 일산화탄소 함유량이 많은 배기를 배출하게 되어 인체에 중대한 해를 준다. 그러나 이와 비슷한 일이 전도시적인 문제가 되어 법규제가 된 것은 최근의 일이고, 배출가스에 대하여서는 미구에 의하여 약 10년 전부터 자동차의 배기규제가 계획되어 금일 진행중이다. 또 소음에 대 하여서는 오히려 극히 초근부터 법규제화가 진행되고 있으나 어느 쪽도 사회의 요구를 완전히 만족시킬만한 대책기술은 용이하지 않다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.304-308
• /
• 2006

The focus of this study is modeling technique for a bellows in vehicle exhaust system. Bellows was developed using tile finite element model by replacing with the equivalent beam. The equivalent beam model were studied in detail. Non-structural node in the cross section of original model is given to expressing their motion. Equivalent mass matrix and stiffness matrix calculated using Guyan reduction method. Material Properties of beam was obtained from the direct comparison between equivalent model and that of Timoshenko beam model. The calculated natural frequencies and mode shape are compared with the reference results and coincided well. The results were compared with the confirmed results, which were in good agreement.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.79-86
• /
• 1997

The need for an active exhaust moise controller has been growing as an reinforcement of exhaust noise regulation, high power output and improvement of average fuel economy. In this study, for development of this active exhaust noise controller, the implementation of a composition of realtime control algorithm for active exhaust noise control and the construction of simulator for realtime control algorithm for active exhaust noise control has been investigated. Also, in order to implement active exhaust noise control with this simulator, the feasibility model for control of vehicle exhaust noise control is suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.665-670
• /
• 2001

The purpose of this paper is to verify a finite element model of an automotive exhaust system using Modal testing. In general, a lot of finite element models are used in initial design step of automotive development. One of them is a finite element model of an exhaust system. Verification on the finite element model of an automotive exhaust system is indispensable. In this paper, a finite element analysis on the exhaust system using MSC/NASTRAN is carried out, and the results are compared with those obtained by modal testing. By comparing MAC values of the analytical modes with the experimental modes, the finite element model of the automotive exhaust system is verified.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.7
• /
• pp.679-684
• /
• 2009

Low frequency exhaust noise of marine diesel engine is one of the most important noise sources in vessels. However, conventional absorptive silencers are ineffective to control exhaust noise because of low absorption in the low frequency range. In the paper, exhaust noise control of marine diesel engine was studied by using the hybrid silencer, which was composed of virtually divided array of concentric hole-cavity resonators and conventional absorptive silencer. A series of tests including field tests were performed to investigate the acoustic performance of the hybrid silencer. Consequently, its high performance of 5${\sim}$10 dB noise reduction in the low frequency range was confirmed and it is expected to be very helpful in reducing the exhaust noise of marine diesel engine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.31-35
• /
• 1992

자동차 관련 소음 및 진동중 엔진과 관련된 것은 흡.배기계 소음과 엔진 자 체의 각 구동 부위 및 연소실 소음으로 대별하여 볼수 있다. 특히 연소실 소 음의 경우에는 엔진 내부에서 발생하는 진동과 압력파가 엔진을 진동시키고, 이러한 엔진의 진동이 방사음을 발생시켜 형성되는 만큼 그 해석 및 공학적 접근 방법이 용이하지 않다. 연소실 소음은 압력의 갑작스런 변화에 의한 폭 발소음과 피스톤과 실린더 벽면의 충돌에 의한 피스톤 슬랩(piston slap)으로 크게 구분할 수 있으며 압력이 높지 않고 압력의 변화가 빠르지 않을 경우 에는 피스톤 슬랩이 기계적 소음의 주 원인이 되는 것으로 알려져 있다. 본 고에서는 피스톤 슬랩에 의한 진동 현상을 예측하기 위한 이론적 접근 방법 을 제시하고 이의 타당성을 검증하기 위한 실험적 방법을 제시하고자 한다. 또한, 피스톤과 실린더의 간극 진단을 위해 슬랩 신호를 이용하는 방법에 대 해 살펴보고, 피스톤과 실린더의 충돌 속도를 통해 슬랩 신호를 줄이기 위한 엔진의 설계 방법에 대해 살펴보고자 한다.