• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.217-240
• /
• 2023

For a while, Functional cosmetics, Cosmeceutical cosmetics, and Derma cosmetics have gained trust and become popular due to the consumers' strong interest in ingredients & efficacy. It's remarkable that Clean or Vegan brands are growing fast because they are emphasizing on different values from the other cosmetic brands. It's needed to attempt to analyze the influence relationship between consumer lifestyle and social value in these changes, and to find out whether the consumption of vegan cosmetics is related to satisfying the need for self-expression in a social atmosphere where ESG is emphasized on. This study analyzed the effect of lifestyle types and self-expression needs on the purchase intention of vegan cosmetics by mediating social values for cosmetics consumers. Lifestyle types were classified into appearance-oriented, health-oriented, and fashion-oriented. For empirical analysis, 321 questionnaires collected from cosmetics consumers living across the country were used. SPSS v26.0 and PROCESS macro v4.2 were used to analyze based on a single mediating model as a single mediator. As a result of the analysis, first, lifestyle types and self-expression needs, excluding appearance-oriented types, were found to have a positive (+) effect on social values. Second, it was found that social value had a positive (+) significant effect on the purchase intention of vegan cosmetics. Third, appearance-oriented, health-oriented, trend-seeking lifestyle types and self-expression needs were all found to have a positive (+) effect on the purchase intention of vegan cosmetics. Fourth, social values were found to mediate lifestyle types, self-expression needs, and purchase intentions, except for appearance-oriented types. Appearance-oriented consumers do not directly affect social values but affect purchase intentions, suggesting that appearance-oriented consumers may not be significantly affected by product-related social values. In a comparison of the relative influence size using standardization coefficients, self-expression needs had the greatest impact on the purchase intention of vegan cosmetics when mediating social values, and health-oriented ones had the least impact. The academic implications of this study include contributing to consumer behavior research by providing insights, mediation mechanisms, and consideration of the niche consumer sector, and directing further research into the cosmetics industry beyond forming marketing strategies and sustainable business practices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1880-1892
• /
• 2010

The purposes of this study were to: a) provide evidence concerning the effects of emotional intelligence on job outcomes, b) examine the impacts of emotional intelligence on employee-related variables such as 'job satisfaction', 'organizational commitment', 'organizational performance', and 'turnover intention' c) identify the conceptual framework underlying emotional intelligence. A survey was conducted to collect data from foodservice managers (N=231). Statistical analyses were completed using SPSS Win (16.0) for descriptive analysis, reliability analysis, factor analysis, t-test, correlation analysis, cluster analysis and AMOS (16.0) for confirmatory factor analysis and structural equation modeling. The concept of emotional intelligence (EI) has been on the radar screens of many leaders and managers over the last several decades. The emotional intelligence is generally accepted to be a combination of emotional and interpersonal competencies that influence behavior, thinking and interaction with others. The main results of this study were as follows. The four EI (Emotional Intelligence) dimensions correlated significantly with age. The means of job satisfaction score were above the midpoint (3.04 point) scale. The organizational commitment score was above the midpoint (3.41 point) scale and was higher at 'loyalty' factor than 'commitment' factor. The means of organizational performance score were above the midpoint (3.34) scale. The correlations among the four EI (emotional intelligence) factors were significant with job satisfaction; organizational commitment, organizational performance and turnover intention. The test of hypothesis using structural equation modeling found that emotional intelligence produced positive effects on job attitude and job performance. Emotional intelligence enhanced organizational commitment, and in turn, managers' attitude produced positive effects on organizational performance; emotional intelligence also had a direct impact on organizational performance. This study has identified the effect of emotional intelligence on organizational performance and attitudes toward one's job.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1986

In order to promote mechanization of corn harvesting in Korea, this study was conducted to find out the effect of moisture content on compressive properties such as force, deformation, energy and modulus of stiffness to the bioyield and the rupture point for Korean corn kernel. In this study, the loading positions of corn were flat, edge, longitude and the moisture contents were about 13, 17, 21, 25% in wet basis. The compression test was carreied out with flat plate by use of dynamic straingage for three varieties of Korean corn under quasi-static force when the loading rate was 1.125mm/min. The results of this study are summarized as follows; 1. When the moisture content of corn ranged from 12.5 to 24.5 percent, at flat position, the bioyied force was in the range of 13.63-26.73 kg and the maximum compressive strength was in the range of 21.55-47.65kg. Their values were reached minimum at about 17% and maximum at about 21% moisture content. The bioyield force was in the range of 13.58-6.70kg at edge position and the maximum compressive strength which was 16.42 to 7.82kg at edge position was lower than that which was 18.55-9.05kg at longitudinal position. 2. Deformation of corn varied from 0.43 to 1.37 mm at bioyield point and from 0.70 to 2.66mm at rupture point between 12.5 to 24.5% moisture content. As the moisture content increased, deformation was increased. 3. The moduli of resilience and toughness of corn ranged from 2.60 to 8.57kg. mm and from 6.41 to 34.36kg. mm when the moisture content ranged from 12.5 to 24.5 percent, respectively. As the moisture content increased, the modulus of toughness was increased at edge position and decreased at longitudinal position. And their values were equal each other at 22-23% moisture content. 4. The modulus of stiffness was decreased with increase in the moisture content. Its values ranged from 32.07 to 5.86 kg/mm at edge position and from 42.12 to 18.68kg/mm at flat position, respectively. Also, the values of Suweon 19 were higher than those of Buyeo. 5. It was considered that the compressive properties of corn at flat position were more important on the design data for corn harvesting and processing machinery than those of edge or longitudinal position. Also, grinding energy would be minimized when a corn was processed between about 12.5 to 17% moisture content and corn damage would be reduced when a corn was handled between about 19 to 24% moisture content in wet basis.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.155-166
• /
• 2002

Since 1990s. there has been an increasing number of traffic accidents at intersection. which requires more urgent measures to insure safety on intersection. This study set out to analyze the road conditions, traffic conditions and traffic operation conditions on signalized intersection. to identify the elements that would impose obstructions in safety, and to develop a traffic accident prediction model to evaluate the safety of an intersection using the cop relation between the elements and an accident. In addition, the focus was made on suggesting appropriate traffic safety policies by dealing with the danger elements in advance and on enhancing the safety on the intersection in developing a traffic accident prediction model fir a signalized intersection. The data for the study was collected at an intersection located in Wonju city from January to December 2001. It consisted of the number of accidents, the road conditions, the traffic conditions, and the traffic operation conditions at the intersection. The collected data was first statistically analyzed and then the results identified the elements that had close correlations with accidents. They included the area pattern, the use of land, the bus stopping activities, the parking and stopping activities on the road, the total volume, the turning volume, the number of lanes, the width of the road, the intersection area, the cycle, the sight distance, and the turning radius. These elements were used in the second correlation analysis. The significant level was 95% or higher in all of them. There were few correlations between independent variables. The variables that affected the accident rate were the number of lanes, the turning radius, the sight distance and the cycle, which were used to develop a traffic accident prediction model formula considering their distribution. The model formula was compared with a general linear regression model in accuracy. In addition, the statistics of domestic accidents were investigated to analyze the distribution of the accidents and to classify intersections according to the risk level. Finally, the results were applied to the Spearman-rank correlation coefficient to see if the model was appropriate. As a result, the coefficient of determination was highly significant with the value of 0.985 and the ranks among the intersections according to the risk level were appropriate too. The actual number of accidents and the predicted ones were compared in terms of the risk level and they were about the same in the risk level for 80% of the intersections.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.67-87
• /
• 1969

1. Objectives and Importance. Many silkworms have been damaged by nuclear polyhedrosis virus diseases thoughout the country every year causing a decease in cocoon production by approximately ten per cent per year. The damage caused by the infections virus has occured in spite of complete disinfection. In this respect, it is well known it is impossible, at the present time, to protect the silkworm from these virus infections through chemical and physical control methods. Therefore, this author has attempted to solve this urgent problem from the view point of heredity and breeding, discovering the different resistances and heritabilities among 120 stains collected from throughout the country, and selecting the ones with highest resistance for the basic materials in the silkworm breeding. 2. Results of work 1) The strains with strong resistance to the nuclear polyhedrosis virus diseases are N$_4$, N$\sub$15/, N$\sub$48/, C$\sub$55/ and Em. the log ED$\sub$50/ values of them vary between 0.799 and 1.611. The susceptible strains are N$\sub$20/, C$\sub$62/, N$\sub$76/, N$\sub$79/ and C$\sub$108/, the log ED$\sub$50/ values of them vary between 5.159 and 7.258. (Reference Table 4) The Japanese strain with a log ED$\sub$50/, value of 3.770 is the strongest, followed by the Chinese strain with a log ED$\sub$50/ value of 3.564. The weakest is the European strain with a log ED$\sub$50/ value of 3.3381. The direction coefficient of the regression equation of the susceptibility varies between 0.1 and 0.6, the uniformness of the resistance of the preserved strains of this country is comparatively low. The hereditary henomena of the resistance of each strain and the conerete method of its application for silkworm breeding main the subjects for later studies. 2) The content of water and ash in silkworm has not been correlated with the capability for resistance to the virus diseases(Reference. Table 8). but it is very significantly correlated with mortality rate (in common reaning). In the case of the silkworms which have just completed the fourth moulting the content of water and ash is not related to the mortality rate. In the case of the silkworms which have just completed the third moulting, however, the water( +0.326) and ash (+0.362) registered a high significance. The ash content in the first ($\div$0.520) and second ($\div$0.386) moults is highly significant but water content in both cases is not significant (Reference Table 7). 3) The No. 205 strain proved to be the best in character among the various F$_1$ hybrids. No. 204 was very good in strength but a little lower in cocoon character than the control. No. 212 was a little low in coccon character and mortality was average, but the cocoon harvest was the best among all the varieties offered for (Reference Table 9). 4), In short, the above mentioned strains which are known to have strong resistance to the virus disease are expected to provide basic data for breeding strong varieties. It is proposed that continued research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.research should be conducted on the characteristics of various strains for a satisfactory preservation of various characteristics.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2949-2967
• /
• 1973

The purpose of this study is to find out and determine the minimum consumptive use of water for Korean cabbage and turmp, so that the minimum water requirement can be secured always for a stable cultivation of these vegetables regardless of weather conditions. The experiment was conducted in two periods; first one from May to July and second one from August to October, each experiment with two varieties of cabbage and two varieties of radish with 2 replicants and 15 treatments. The results found from the above are briefly as follows: 1. Since the mean soil moisture equivalent 64 days after the treatment was 28.5% and the soil moisture content at the time was 2.67% which is far less than that of the wilting point, the crop seemed to be extremely caused by a drought. 2. The rate of 51 days after the seeding, soil moisture content of plot No.2 where irrigation has been continuous was the highest or 21.3%, whereas the plot No.14 without irrigations was 11.2% and the lowest. Therefore, the soil moisture content for the minimum qrowth seemed to be 20%. 3. The consumptive coefficient of Blaney and Criddle on cabbage in two periods were K=1.14 and 0.97 respectively, and on radish in two periods were K=1.06 and 0.86 respectively, thus, cabbage was higher than radish. The consumptive coefficient in the first experiment (May-July) was 0.17 to 0.20 higher than the 2nd experiment(August-October). 4. Nomally, cabbage and radish germinate within one week, however, the germination ot these crops which were treated with a suspended water supply from the beginning took two full weeks. 5. When it elapsed 30 days after seeding, the conditions in plot 1,2 and 3 were fairly good however, the crops in the plops other than these showed a withering and the leaves were withered and changed into high green due to an extrem drought. Though it was about same at the beginning, the drought damage on cabbage was worse than that on radish period, and the reasos for this appears in the latter that the roots are grown too deep. 6. The cabbage showed a high affinity between treated plots and varieties. Consequently, it can be said that cabbage is very suseptive to drought damage, and the yield showed a difference of 35% to 56% depending on the selection oe varieties. 7. The radish also showed a high affinity between the treated plots, however, almost us affinity existed between varieties. Therfore, the yield of radish largely depends on the extent of drought, and the selection of variety does not affect at all. 8. The normal consumptive use on cabbage is $0.62{\ell}/sec$, while that on radish is $0.64{\ell}/sec$, and the minimum optimum water requirement that was obtained in this study is $4,000cc/day/m^3$ or $0.462{\ell}/sec/ha$.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.171-177
• /
• 2013

The purpose of this study is to find a scheme to scale down the KMA (Korea Meteorological Administration) digital precipitation maps to the grid cell resolution comparable to the rural landscape scale in Korea. As a result, we suggest two steps procedure called RATER (Radar Assisted Topography and Elevation Revision) based on both radar echo data and a mountain precipitation model. In this scheme, the radar reflection intensity at the constant altitude of 1.5 km is applied first to the KMA local analysis and prediction system (KLAPS) 5 km grid cell to obtain 1 km resolution. For the second step the elevation and topography effect on the basis of 270 m digital elevation model (DEM) which represented by the Parameter-elevation Regressions on Independent Slopes Model (PRISM) is applied to the 1 km resolution data to produce the 270 m precipitation map. An experimental watershed with about $50km^2$ catchment area was selected for evaluating this scheme and automated rain gauges were deployed to 13 locations with the various elevations and slope aspects. 19 cases with 1 mm or more precipitation per day were collected from January to May in 2013 and the corresponding KLAPS daily precipitation data were treated with the second step procedure. For the first step, the 24-hour integrated radar echo data were applied to the KLAPS daily precipitation to produce the 1 km resolution data across the watershed. Estimated precipitation at each 1 km grid cell was then regarded as the real world precipitation observed at the center location of the grid cell in order to derive the elevation regressions in the PRISM step. We produced the digital precipitation maps for all the 19 cases by using RATER and extracted the grid cell values corresponding to 13 points from the maps to compare with the observed data. For the cases of 10 mm or more observed precipitation, significant improvement was found in the estimated precipitation at all 13 sites with RATER, compared with the untreated KLAPS 5 km data. Especially, reduction in RMSE was 35% on 30 mm or more observed precipitation.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2003

In this study, muscle activity was measured using surface EMG (sEMG) during a voluntary maneuver (ankle dorsiflexion) in the supine position was compared pre and post gait training. Nine patients with incomplete spinal cord injury participated in a supported treadmill ambulation training (STAT), twenty minutes a day, five days a week for three months. Two tests, a gait speed test and a voluntary maneuver test, were made the same day, or at least the same week, pre and post gait training. Ten healthy subjects' data recorded using the same voluntary maneuvers were used for the reference. sEMG measured from ten lower limb muscles was used to observe the two features of amplitude and motor control distribution pattern, named response vector. The result showed that the average gait speed of patients increased significantly (p〈0.1) from 0.47$\pm$0.35 m/s to 0.68$\pm$0.52 m/s. In sEMG analysis, six out of nine patients showed a tendency to increase the right tibialis anterior activity during right ankle dorsiflexion from 109.7$\pm$148.5 $mutextrm{V}$ to 145.9$\pm$180.7 $mutextrm{V}$ but it was not significant (p〈0.055). In addition, only two patients showed increase of correlation coefficient and total muscle activity in the left fide during left dorsiflexion. Patients' muscle activity changes after gait training varied individually and generally depended on their muscle control abilities of the pre-STAT status. Response vector being introduced for quantitative analysis showed good Possibility to anticipate. evaluate, and/or guide patients with SCI, before and after gait training.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.82-93
• /
• 2000

Purpose: We characterized the signals obtained from the components of a small gamma camera using Nal(Tl)-position sensitive photomultiplier tube (PSPMT) and optimized the parameters employed in the modules of the system. Materials and Methods: The small gamma camera system consists of a Nal(Tl) crystal ($60{\times}60{\times}6mm^3$) coupled with a Hamamatsu R3941 PSPMT, a resister chain circuit, preamplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a personal computer for control and display. The PSPMT was read out using a resistive charge division circuit which multiplexes the 34 cross wire anode channels into 4 signals (X+, X-, Y+, Y -). Those signals were individually amplified by four preamplifiers and then, shaped and amplified by amplifiers. The signals were discriminated and digitized via triggering signal and used to localize the position of an event by applying the Anger logic. The gamma camera control and image display was performed by a program implemented using a graphic software. Results: The characteristics of signal and the parameters employed in each module of the system were presented. The intrinsic sensitivity of the system was approximately $8{\times}10^3$ counts/sec/${\mu}Ci$. The intrinsic energy resolution of the system was 18% FWHM at 140 keV. The spatial resolution obtained using a line-slit mask and $^{99m}Tc$ point source were, respectively, 2.2 and 2.3 mm FWHM in X and Y directions. Breast phantom containing $2{\sim}7mm$ diameter spheres was successfully imaged with a parallel hole collimator. The image displayed accurate size and activity distribution over the imaging field of view Conclusion: We proposed a simple method for development of a small gamma camera and presented the characteristics of the signals from the system and the optimized parameters used in the modules of the small gamma camera.