• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.55-55
• /
• 2013

중금속이 함유되지 않은 친환경 방청코팅제 개발을 위해 현재 국내 시장을 잠식하고 있는 외산 무기 아연말 피막기술의 국산화 상용기술 방안과 경쟁력 확보를 위해 다양한 연구방법을 시도하였으며, 외산 기술에 상응하는 SST 1,000시간이상의 고내식성 확보 기술을 제안하고자 한다.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.212-216
• /
• 2005

Benzotriazole which is used as a corrosion inhibitor for the zinc coated steel was intercalated into Na-MMT. X-ray diffraction experiments on intercalant/silicate composite samples demonstrated that the intercalation of intercalant leads to an increase in the spacing between silicate layers. Water soluble poly(ethylene-co-acrylic acid) (PEA) nanocomposites, to use as a coating agent, were prepared with these modified MMT. We found that mono-layered silicates were dispersed in PEA matrix and those resultants were exfoliated nanocomposites. From the result of salt spray test, we found that this coating agent prepared with water soluble poly(ethylene-co-acrylic acid) (PEA) nanocomposite provided good corrosion protection. These results were caused by decreasing the rate of oxygen permeation from silicate layers dispersed homogeneously in PEA matrix and the effect of corrosion inhibitor from benzotriazole.

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.143-155
• /
• 2020

Hydrophobic Organic-Inorganic (O-I) hybrid materials prepared by sol-gel process have been widely used at functional coating fields such as coatings for anti-corrosion, anti-icing, self-cleaning, anti-reflection. The key point for fabricating hydrophobic surface is to optimize the surface energy and roughness of the coating films. There are typical processes to control the surface energy and roughness which are 'In situ fabricating', 'Pre-fluorinating/Post-roughening', 'Pre-roughening/ Post-fluorinating'. In this study, particle-binder process was used for in-situ fabrication of hydrophobic coating films. Various O-I hybrid compounds prepared using several kinds of alkoxysilane compounds were used as a binder for silica nanoparticles at particle-binder process. To study effect of fluorine content and weight ratio of particle : binder on the hydrophobicity and surface morphology, Hydrophobic coating films were prepared onto glass substrate at various content of fluorine content of O-I hybrid binder and weight ratio of particle : binder. The coating films prepared using O-I hybrid binder (GPTi-HF10) having 10 wt% of fluorine content showed the highes water contact angle (107.52±1.6°). The coating films prepared at 1:3 weight ratio of GPTi-HF10 : silica nanoparticle exhibited the highest water contact angle (130.84±1.99°).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.107-108
• /
• 2009

This is an experimental study on using the Honeycomb System show you the method of increasing ability of ductility and shear strength seismic performance to reinforced concrete column and masonry waist-high wall.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1117-1123
• /
• 2002

Coating ceramic balls activate water molecular in water as radiate far-infrared radiation of high efficiency, and then prevent formation of scale and corrosion of pipe. Therefore, but only keep away drop of heat exchange efficiency of boiler, not also remove formed scale. As a result, pipe of boiler has clean and has form thin protection film in inner of pipe. Also, the water treated by rust preventing system using the ceramic balls, that is harmless, tasteless, odorless, and non-toxicity in the human body, and it can use drinking water. This rust preventing system can save energy and protect environment.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.358-359
• /
• 2019

철교나 석유비축기지 탱크저판 및 각종 매설관로 등 대부분 철 성분 골조는 시간이 경과하면 주변의 환경에 따라 부식이 급격히 일어난다. 이러한 철강재가 부식되는 철강재가 시설물의 주요 구성물이 되고 있는 시설물의 수명을 크게 단축시키는 주요원인이 되고 있다. 이에 대한 대비책으로 방청도료나 코팅을 이용하는 방법과 달리, 전기적으로 전위차를 같게 하여 부식을 방지하는 전기방식법을 적용함에 있어 방식전류가 불균일한 경우 양극 소모가 불균일함에 따라 교체시기 문제를 극복하기 위해 회로 등가 임피던스 추정 및 RF 릴레이 장착한 TB를 이용한 방식전류제어장치를 개발하였다.

• The monthly packaging world
• /
• s.262
• /
• pp.94-104
• /
• 2015

환경부는 '화학물질의 등록 및 평가 등에 관한 법률(화평법)'과 '화학물질관리법(화관법)' 시행규칙을 공포하고 지난 달부터 시행했다. 환경부에 따르면 두 법안은 화학물질의 체계적인 관리로 사전에 안전사고를 예방하고 국민건강과 환경을 보호하기 위해 제정됐다. 화학물질의 생산 유통 등 모든 과정의 안전관리를 강화하는 것이 골자다. 우선 화평법 시행에 따라 모든 신규 화학물질과 연간 1톤 이상 제조 수입되는 기존 화학물질에 대한 등록이 의무화되고 등록 신청 기준도 강화된다. 다만 제조 수입량이 연간 1톤 미만일 경우 등록 신청 제출 자료를 정식 등록 9개보다 적은 4개로 간소화하고 등록기간도 30일에서 3~7일로 줄였다. 또 유해물질 함유제품으로 인한 피해를 예방하기 위해 생활화학 제품 15종을 우려제품으로 지정해 안전 표시기준을 준수하도록 했다. 관리대상 품목은 세정제 합성세제 표백제 섬유유연제 코팅제 접착제 방향제 탈취제 방청제(금속부식 방지제) 김서림방지제 물체염탈색체 문신용염료 소독제 방충제 방부제 등이다. 화관법에서는 유해 화학물질 취급 때 공통 적용되는 46개 준수사항을 규정하고 물질별로 구체적인 취급기준을 고시하도록 했다. 취급시설의 설치 관리기준도 시설 종류별로 구체화했다. 새로 도입되는 장외 영향평가는 취급시설 설치자가 화학사고 발생 시 사업장 주변지역 사람이나 환경에 미치는 영향을 사전에 평가해 시설을 안전하게 설계 설치하도록 규정했다. 과징금과 행정처분 기준도 구체화했다. 행정처분은 2년 내 위반 횟수에 따라 경고 개선명령 영업정지 허가취소로 차등화하고 사고가 일어나면 사상자와 사업장 밖 피해액을 기준에 따라 산정해야 한다. 본 고에서는 두 법률의 주요 내용과 함께 주요 문의 사항을 살펴봄으로써 이해를 도우고자 했다.

• Corrosion Science and Technology
• /
• v.17 no.1
• /
• pp.30-36
• /
• 2018

The high rate of corrosion of magnesium alloys makes it limited for industrial applications. Therefore, surface treatment is required to enhance their corrosion resistance. In our study, a chemical conversion coating for protecting the corrosion of the magnesium alloy, AZ31B, was prepared by using a phosphate-permanganate solution. The chemical conversion coating had a limited protection ability due to defects arising from cracks and pores in the coating layer. The sol-gel coating was prepared by using trimethoxymethylsilane (MTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) as precursors, and aluminum acetyl acetonate as a ring opening agent. The corrosion protection properties of sol-gel and conversion coatings in 0.35wt% NaCl solution were measured by the electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test. The EIS results indicated that the resistance of the chemical conversion coating with the sol-gel coating was significantly improved through the sol-gel sealed phosphate-permanganate conversion coating. The results of the potentiodynamic polarization test revealed that the sol-gel coating decreased the corrosion current density ($I_{corr}$). The SEM image showed that the sol-gel coating sealed conversion coating and improved corrosion protection.

• Korean Journal of Metals and Materials
• /
• v.47 no.10
• /
• pp.652-659
• /
• 2009

Many ancient and historical artifacts were made by copper and its alloys. In the case of outdoor exposure artifacts, the surface could be suffered from corrosion and tarnish by the reaction with its environment. In order to preserve the artifacts, surface treatment would be needed and BTA coating has been usually applied to tin-bronze. This paper dealt with the evaluation of the properties of BTA coated film using a linear polarization method and AC impedance measurement. On the base of corrosion rate and film resistance for the specimen formed by coating process, optimum coating conditions are as follows; 3 cycles brushing or 3 cycles spraying coatings for natural dried process and 1 cycle brushing coating or 5 cycles spraying coating for hot-air dried process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.92-100
• /
• 2017

The Helicopter MRA Control Rod System has the important function of controlling the speed, height, and direction of helicoptersby adjusting the main rotor disc. However, the ingress of water into the inner control rod can cause ice damage in the rod during winter operation and also corrosion;these defects need to be rectified. The water flowed into the control rod through the upper side space, and the rod was cracked during icing expansion occurring at low temperature. The corrosion occurred due to the lack of coating process during the manufacturing process. To resolve these problems, the upper rod was sealed to prevent water inflow and a coating process was added to prevent corrosion. These solutions were verified by awaterproof test and a salt fog test. The phenomena, causes and measures were reviewed and the methods of improvement were established and proven. This proposed technology to prevent water infiltration and corrosion will contribute to the safety of rotary wing aircraft.