• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1556-1558
• /
• 1994

An air/quartz dielectric double barrier pulse discharge has been investigated to develop a novel si lent type ozone generator. It is found that there are very active pulsed coronas occurred in the airgap which are very useful for ozone generation. And, the corona onset voltage of the airgap of the air/quartz double barrier was enfluenced greatly by the airgap of the air/quartz dielectric double barrier, and depended greatly upon the airgap ranged of $0.0{\sim}3.0mm$ and by the quartz tube thickness ranged of $1.75{\sim}2.25mm$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.514-514
• /
• 2013

플라즈마와 혈액의 상호작용 특성을 파악하기 위해 혈액응고 실험을 하였다. 생체에 적용 가능한 바이오 플라즈마 소스를 개발하여 다양한 조건으로 혈액에 플라즈마를 조사하였다. 혈액 응고의 정량적인 측정 방법으로 혈액의 저항을 측정하였다. 본 실험에 사용된 플라즈마 제트 장치는 의료용 바늘과 유리관, 외부 접지로 이루어져 있다. 플라즈마 제트 장치는 고전압 전극이 유리관 안에 위치하고 접지 전극이 유리관 바깥에 위치한다. 의료용 바늘을 통해 Ar gas를 주입하며, 약 2 kV의 전압을 인가하여 방전시켰다. 자연적으로 혈액을 응고시킨 경우, 칼슘 클로라이드를 첨가하여 응고시킨 경우, Ar gas 및 온풍을 단독적으로 불어넣은 경우, 그리고 플라즈마 제트를 조사한 경우로 나누어 실험을 진행하였다. 두개의 떨어진 전극 사이에 일정량의 혈액을 배치시켜 저항을 측정하여 응고 정도를 파악하였다. 플라즈마 제트를 조사하였을 경우 아무것도 처리하지 않은 자연상태의 혈액보다 혈액이 응고되는 속도가 빠르게 나타났다. Ar gas와 온풍을 단독으로 불어넣어 준 경우와 혈액 표면이 응고되었으나, 약 20초가 지나면 다시 원래 상태의 혈액으로 돌아감을 확인하였다. 플라즈마 제트를 혈액에 조사했을 때는 혈액이 이전의 혈액 상태로 돌아가는 경향이 나타나지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.203.2-203.2
• /
• 2016

미생물이 스스로 생성한 고분자 물질에 싸이며 군집체를 형성한 바이오필름은 고체 표면에 부착되며 우리 생활 속에 다양한 형태로 발견할 수 있다. 바이오필름은 미생물에 적합하지 않은 외부 환경으로부터 미생물 스스로 보호하는 기능을 하며, 형성된 바이오필름은 오랜 기간 동안 생존하여 살균제나 항생제로부터 저항성을 가져 살균과정에서 제거되지 않고 2차오염을 야기할 수 있어 식품 가공 기계 및 수도관, 의료기기 등에 형성되었을 경우 식품 오염, 상처 감염 등의 원인이 된다. 이 때문에 위생과 바이오필름의 상관관계를 인지하고 이를 제어하기 위한 연구가 여러 방법으로 진행되고 있다. 대표적인 방법으로는 천연 향균제 개발, 쿼럼 센싱(Quoroum sensing)과 같이 미생물의 신호전달 체계를 차단하는 물질 개발 및 플라즈마 처리 등이 있다. 본 연구에서는 격자형식의 유전장벽방전(DBD) 형식의 플라즈마 소스를 개발하여 바이오필름의 효과적인 제어 가능성을 확인하고, 제어 방식의 관계를 파악하였다. 플라즈마 처리 대상의 화학적 분석을 위하여 유기물질 등을 사용해 플라즈마 처리수 내 화학물질 분석 시스템을 구축하여 이를 기반으로 플라즈마로 생성된 HNO2, NO2-, H2O2 등의 화학종이 가지는 바이오필름 제어 관계를 살펴보았으며, 화학적 방법인 제어효과와 비교하여 플라즈마의 바이오필름 제어 특성에 대해 살펴보았다. 본 발표에서 플라즈마의 바이오필름 제어효과에 대한 분석에 대해 더 자세한 결과가 발표될 예정이다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.339-341
• /
• 2009

Surge Protective Device(SPD) is installed by increasing information and communication equipments and home network equipments by individual home, and the amount of SPD used is increasing by revision industry regulations and strengthening equipotential grounding system. Parts of SPD installed in residential distribution board has ZnO varistor, voltage constraint type devices, but it is exposed to Temporary Overvoltage Characteristic. This thesis analyzes products through Thermal Stability test for SPD for general house and suggests the better method. As results of analysis, Gas Discharge Tube(GDT) to cut off from a leakage current and more than two kinds of safety devices to protect Thermal Runaway were needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1055-1061
• /
• 2002

This paper deals with a design and fabrication of an electronic ballast for 70[W] ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active power factor correction circuit (PFC), a half-bridge inverter, a LC resonant circuit and a microprocessor. The developed ballast also includes a specially designed time circuit which provides reignition signal of lamps. Running frequency of the ballast is .jet at 40[kHz] to avoid acoustic-resonance and flickering. From the experimental results, input power factor and efficiency of the ballast are estimated 99.8[%] and 93.1[%], respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.143-148
• /
• 2004

This paper shows property conversion of water and removing characteristics of Escherichia coli for discharge tube with $ZrO_2$ beads. At the result of the removal characteristic experiments of Escherichia coli using the discharge tube with $ZrO_2$ beads, because the electric field is also increased when input voltage is increased, the removal characteristic of Escherichia coli was appeared relation connection to input voltage. And if a passing number of test water in discharge tube with $ZrO_2$beads is increased, the removal ratio of Escherichia coli is to be increased because passing number of electric field section is increased. And if diameter of $ZrO_2$beads is increased, the removal time of Escherichia coli is to be decreased because dielectric polalization of $ZrO_2$beads. Also, the removal ratio of Escherichia coli of the discharge tube with $ZrO_2$beads. is appeared higher than the removal ratio of the discharge tube without $ZrO_2$beads. And a satulation punt of ozone and $H_2$ $O_2$generation density inner water was appeared near 60[min].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1119-1122
• /
• 2003

In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric in water was simulated. The reactor was made up of the spherical dielectric that is diameter 2.5[mm], ${\epsilon}_r$ : 5, 100, 1000, 5000 respectively and one glass plate being 2[mm] thickness, ${\epsilon}_r$ : 5 as electrode. The discharge gap was 7[mm]. As a result of the simulation, in case of being about the same value between the dielectric constant of spherical dielectric and water, when the reactor was applied to high voltage dielectric polarization characteristic was trending toward disappearance. To get more strong electric field, the dielectric constant should be higher comparatively, Increasing the spherical dielectric constant, the location of equippotential line was shifting from the interior to the exterior.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1143-1146
• /
• 2003

This paper was simulated the electric field distribution in dielectric tube with two layers and spherical dielectric in water. The reactor was made up of the spherical dielectric that is diameter : 2.5[mm], ${\epsilon}_r$ : 5, 25, 100, 1000, 5000 respectively and two glass plate being 2[mm] thickness, ${\epsilon}_r$ : 5 as electrode. The discharge gap was 9[mm]. As a result of the simulation, in case of being about the same value between the dielectric constant of spherical dielectric and water, when the reactor was applied to high voltage, dielectric polarization characteristic was trending toward disappearance. To get more strong electric field, the dielectric constant should be higher comparatively, Increasing the spherical dielectric constant, the location of equippotential line was shifting from the interior to the exterior.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.343-348
• /
• 2004

We report the design and basic operating characteristics of an radio frequency excited waveguide $CO_2$ laser. Four picecs of waveguide channels are placed in one laser cavity to increase a power per unit length with the form of a 2 ${\times}$ 2 matrix. Four independent optical outputs are measured from the front of output coupler, and these beams are combined to a Gaussian mode beam far from the output coupler. A 12 W output power has been obtained with $CO_2$ : $N_2$ : He : Xe = 1 : 1 : 3 : 0.2 of the gas mixture and 200 W of radio frequency.