• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.174-180
• /
• 2015

In this paper, we propose the passive sonar signal processing technique for estimating target information using proximity sensor. This algorithm is performed by single sensor which is constituted underwater sensor network and has a hierarchical structure. The estimated parameter is the velocity, the depth, the distance and bearing at CPA situations and we can improve the accuracy of signal processing techniques through having a hierarchical structure. We verify the performance of the proposed method by computer simulation and then we check the result that 20% error can be occurred in maximum detectable range. We also confirm that proposed method has the reliability in the actual sea environment through the sea experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.95-102
• /
• 2016

Geomagnetic sensors are widely utilized for sensing heading direction of quadrotors. However, measurement from a geomagnetic sensor is easily corrupted by environmental magnetic field interference and roll/pitch directional motion. In this paper, a measurement method of a quadrotor heading direction is proposed for application to yaw attitude control. In order to eliminate roll/pitch directional motion effect, the geomagnetic sensor data is compensated using the roll/pitch angles measured for stabilization control. In addition, yaw-directional angular velocity data from a gyroscope sensor is fused with the geomagnetic sensor data using a complementary filter which is a simple and intuitive sensor fusion method. The proposed method is applied to experiments, and the results are presented to prove validity and effectiveness of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3161-3167
• /
• 2010

Hall sensors of BLDC(brushless DC) motor are used to detect a position information for a control mechanism, which implements an algorithm for velocity and position control. Actual azimuth and altitude were measured to evaluate a control precision. The measurement revealed comparatively good accuracy that the measured values were $2.02^{\circ}$ and $1.01^{\circ}$ respectively, and the maximum error falls within $1.86^{\circ}$. The developed monitoring system of photovoltaic generation plants is a LCU(Local Control Unit) based on an integrated monitoring system which supports 1:N method for multiple simultaneous connections, remote control and real-time system state monitoring.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1421-1431
• /
• 2005

There are two methods in 3-D sound reproduction: a surround system, like 3.1 channel method and a binaural system using 2-channel method. The binaural system utilizes the sound localization principle of a human using two ears. Generally, a crosstalk between each channel of 2-channel loudspeaker system should be canceled to produce a natural 3-D sound. To solve this problem, it is necessary to trace a head movement. In this paper, we propose a new algorithm to correctly trace the head movement of a listener. The Proposed algorithm is based on the detection of face and eye. The face detection uses the intensity of an image and the position of eyes is detected by a mathematical morphology. When the head of the listener moves, length of borderline between face area and eyes may change. We use this information to the tracking of head movement. A computer simulation results show That head movement is effectively estimated within +10 margin of error using the proposed algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.562-572
• /
• 2003

A matched-target model inversion method was developed for a passive sonar to estimate the position of moving targets. Based on the well known matched-field processing in underwater acoustics, the method finds target position by matching the measured target directions and frequencies with the corresponding values of the proposed target model. For the efficient and accurate estimations, the parameter searching was accomplished using a hybrid optimizing method, which first starts with a global optimization such as generic algorithm or simulated annealing then applies a local optimization of a simple down hill algorithm. The suggested method was testified using simulations for three different moving scenarios. The simulation results showed that the method is robust in convergence, even under the situation of over 5 times standard deviation of Gaussian distribution of measured error, and is practical in calculation time as well.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.53.1-53.1
• /
• 2016

국립대구과학관 천체 관측 핵심시설인 1m 반사망원경을 개발하고 설치 완료하였다. 본 발표에서는 국립대구과학관 1m 망원경의 시스템 사양과 개발 및 설치과정을 전반적으로 기술하고 앞으로의 활용계획에 대해 소개하고자 한다. 이번에 도입된 주망원경은 지난 2014년 11월부터 광학계 및 마운트 설계를 시작으로 2016년 5월까지 약 1년 6개월의 개발기간을 거쳐 설치 완료되었다. 순수 국내기술로 개발된 주망원경은 주경 1,000mm(부경 300mm)의 유효구경을 가지며 후방초점거리가 700mm인 초점비 F/8의 리치-크레티앙 방식의 광학계로 설계되었다. 레이저 간섭계를 이용하여 거울면 전체의 형상 오차를 정밀하게 측정한 결과 주경면 PV < ${\lambda}/4$, RMS < ${\lambda}/20$, 부경면 PV < ${\lambda}/10$, RMS < ${\lambda}/50$의 형상 정밀도를 가진다. 포크형태의 경위대식 마운트 구조로 방위각, 고도 양축과 디로테이터에 각각 모터가 장착되어 움직이는 다이렉트 드라이브 방식으로 구동된다. 최대 구동속도는 $2^{\circ}/s$이상, 포인팅 정밀도는 2'이하, 10분간 추적 정밀도는 3"이하(10분간 오토가이더 추적 정밀도는 1"이하)의 구동 성능을 가진다. 제어용 컨트롤 시스템은 JTCS(Justek Telescope Control System)를 사용한다. 성능 평가를 위해 시험 관측된 10~13등급 사이 10개의 별들에 대한 FWHM 측정결과는 4~5" 범위에 있다. 앞으로 지속적인 성능 평가와 업그레이드를 통해 향후 정밀도를 높여 학술 연구용으로 공개할 예정이다. 이번 국립대구과학관 1m 주망원경의 도입으로 지역 천문교육 프로그램이 한 단계 더 도약할 수 있을 것으로 기대한다.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.41-49
• /
• 2014

Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1973-1980
• /
• 2017

In the case of a small UUV operating an active synthetic aperture sonar, various velocity disturbances may occur on the path due to the influence of external underwater environment, and this causes phase errors in coherent synthetic aperture processing, which has a large influence on the detected image. In this paper, when a periodic sinusoidal velocity disturbance is generated in the traveling direction, the phase generated by the round trip slope range at each position is estimated the cross correlation coefficient for multiple received signals and compensated the position variation in the overlapped DPC by the average value within the maximum allowable width. Through simulations, it has been confirmed that the images degraded by the velocity disturbance amplitude and fluctuating frequency of the UUV are removed from the false targets and the performance of azimuth resolution is improved by the proposed phase compensation method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.251-257
• /
• 2012

The flight controller should meet the flying qualities, stability margins, and time response requirement according to the class of a target aircraft or UAV. Classical design process of PID controller is a very time consuming process and needed trial and erros. The best way is to apply the multi-disciplinary optimization algorithm to meet the numerous constraints of controller requirements. This paper presents how multi-objective parameter optimization (CONDUIT) can be used to determine many design parameters of lateral stability and augmentation system for roll and heading controller of the small UAV. To verify the effectiveness of applying the optimization method, designed controller using optimization are compared with the baseline controller that is designed only considering the time responses.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2017

In this study, novel approximate form of the square-root operator of three dimensional acoustic Parabolic Equation (3D PE) is proposed using a rational approximant for two variables. This form has two advantages in comparison with existing approximation studies of the square-root operator. One is the wide-angle capability. The proposed form has wider angle accuracy to the inclination angle of ${\pm}62^{\circ}$ from the range axis of 3D PE at the bearing angle of $45^{\circ}$, which is approximately three times the angle limit of the existing 3D PE algorithm. Another is that the denominator of our approximate form can be expressed into the product of one-dimensional operators for depth and cross-range. Such a splitting form is very preferable in the numerical analysis in that the 3D PE can be easily transformed into the tridiagonal matrix equation. To confirm the capability of the proposed approximate form, comparative study of other approximation methods is conducted based on the phase error analysis, and the proposed method shows best performance.