• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.45-49
• /
• 1999

본 논문은 전력전자 시스템의 방열판 시스템에 대한 이론과 실제 시스템을 고찰하고 있다. 본 논문에는 공냉식과 수냉식 방열 시스템에 관한 내용이 있다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.487-488
• /
• 2011

본 논문에서는 풍력발전용 전력변환기 내부 소자의 방열에 사용되는 수냉식 방열판의 관 형상을 제안한다. 최근 대용량 전력변환기는 소형화 및 효율성이 중요시 되고 있으며, 이에 따라 기구의 안정적이고 장기적인 운영을 위한 수냉식 방열설계가 필수적이라 할 수 있다. 수냉식 방열판는 다수의 원형관으로 구성되며, 이 원형관의 형상은 방열판의 열전달 성능에 직접적인 영향을 주게 된다. 따라서 본 논문에서는 열전달 촉진을 위한 방열판의 관 형상들을 모델링하고 열해석 시뮬레이션을 진행하여 모델링된 방열판들의 방열특성을 비교/분석하였다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.261-266
• /
• 2020

When a KW-class power control unit is installed in an aircraft installation, a heat dissipation design for a large amount of heat generated during power conversion should be considered. Failure to provide adequate heat dissipation can lead to equipment malfunction and fire, which can be a fatal factor in aviation operations. This paper describes the heat dissipation design of a KW-class power control unit installed in aircraft installation. The design and manufacturing test were conducted through computerized analysis, and the analysis model was corrected by confirming the rapid heat generation phenomenon of the heating element due to high power control. After the model revision, the design was improved, and the high-temperature operation test of the US military standard MIL-STD-810G was performed to confirm the feasibility of the improved design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.76-83
• /
• 2011

This paper focuses on the thermal design of a signal processor in Micro-Wave Seeker. High temperature environment and ESS(Environmental Stress Screening) test condition should be considered in designing a signal processor. First, we performed the thermal analysis to know conditions under which a signal processor is thermally reliable. As a result of thermal analysis, we found that adopting heat transfer block to the thermally fragile components is most efficient, because the heat transfer block can control the thermal loads of the individual components. Next, we verified this solution by numerical simulation and experiment and concluded that thermal reliability of a signal processor can be achieved. Maximum temperature difference between numerical simulation and experiment is about $2^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4398-4404
• /
• 2012

This thesis was conducted a numerical analysis on the radiant heat performance according to factors of design of heat sink for cooling of the automotive LED head lamp. The heat sinks were designed with 5 different types to fit the limited internal space by formula based on an existing product (Type 1). Designed heat sinks of five types were analyzed by ANSYS CFD V12.1, and the analysis results were compared with the existing type. The results of simulation were analyzed temperature distribution and average temperature, air flow characteristic, heat flux etc. This thesis was researched on the correlation of the cooling performance according to the heat sink structure and the fin shape. Through numerical analysis, could be confirmed heat sink Type 2 as the best results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2243_2244
• /
• 2009

본 논문에서는 알루미늄 재질로 된 방열판과 PCB에 1[W]급 LED 14개를 모듈 방열 설계 하여 COMSOL Multiphysics로 시뮬레이션을 통한 결과, 경계면 온도는 약 $80^{\circ}C$, Max.온도$141^{\circ}C$, Min.온도$20^{\circ}C$까지 변화로 실 제작에 근접한 온도 확인이 가능함을 확인 할 수 있었다.

• KIPE Magazine
• /
• v.25 no.4
• /
• pp.35-38
• /
• 2020

• KIPE Magazine
• /
• v.25 no.4
• /
• pp.28-34
• /
• 2020

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.641-648
• /
• 2023

Recently, the rapid growth of artificial intelligence among the 4th industrial revolution has progressed based on the performance improvement of semiconductor, and circuit integration. According to transistors, which help operation of internal electronic devices and equipment that have been progressed to be more complicated and miniaturized, the control of heat generation and improvement of heat dissipation efficiency have emerged as new performance indicators. The DUT(Device Under Test) Shell is equipment which detects malfunction transistor by evaluating the durability of transistor through heat dissipation in a state where the power is cut off at an arbitrary heating point applying the rating current to inspect the transistor. Since the DUT shell can test more transistor at the same time according to the heat dissipation structure inside the equipment, the heat dissipation efficiency has a direct relationship with the malfunction transistor detection efficiency. Thus, in this paper, we propose various method for PCB configuration structure to optimize heat dissipation of DUT shell and we also propose various transformation and thermal analysis of optimal DUT shell using computational fluid dynamics.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.170-172
• /
• 2008

본 논문은 LED조명기구의 상용화에 문제가 되고 있는 방열설계에 관한 논문으로서, CF-design을 이용한 방열해석을 통하여 문제해결의 방법을 제시한다. 해석 결과 시뮬레이션 값과 시작품 제작 후 측정 온도와의 차이가 6[$^{\circ}C$]이하로 도출되었으며 주어진 제 요소들을 잘 활용하면 실제작품의 목표치에 근접하는 결과를 얻을 수 있다.