• Title/Summary/Keyword: 방식특성

Search Result 10,043, Processing Time 0.045 seconds

막구조의 구조해석 및 구조설계

  • 권택진;서삼열
    • Computational Structural Engineering
    • /
    • v.4 no.3
    • /
    • pp.18-22
    • /
    • 1991
  • 막구조는 그 특유의 조형성과 구조적 특성으로 인하여 여러가지 용도의 건축물로 그 사용의 범위가 날로 증가하고 있다. 또한, 이 구조방식은 재료의 투광성 때문에 내부공간이 발고, 경량성, 시공성 등에서 이점이 있으며, 전통적인 다른 구조방식과 비교하여 동질의 안전성과 내구성을 인정받고 있다. 그러나, 막구조는 다른 구조 방식과는 상이한 구조적 특성을 가지고 있으므로 구조계획 및 설계는 이러한 사항을 충분히 인지하여, 구조적인 합리성, 경제성, 시공성 등을 고려하여 수행하여야 한다. 따라서 본 고에서는 막구조를 구조적 특성에 따라서 분류하고, 각 구조방식에 대한 구조설계시 고려사항을 기술하여 막구조설계에 대한 기초자료를 제공하고자 한다. 또한, 막구조의 특성상 반드시 수행되어야 하는 형상탐색(Shape Finding)과정을 설명하고 그 필요성을 논의하고자 한다.

  • PDF

Position Sensorless Starting of BLDC Motor for Compressor (압축기용 BLDC 전동기의 센서리스 기동)

  • Lee Kwang-Woon;Lee Joon-Hwan;Choi Jae-Young
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.10-12
    • /
    • 2006
  • BLDC 전동기와 같은 영구자석 전동기는 토크 각에 따라 출력 토크의 변화가 크기 때문에 원활한 기동 특성을 얻기 위해서는 회전자의 초기 위치 정보가 필수적으로 요구된다. 본 논문에서는 냉장고용 왕복동 압축기의 구동을 위해 사용되는 BLDC 전동기의 센서리스 구동장치에서 원활한 기동 특성을 얻기 위한 새로운 기동 제어 방식을 제안한다. 제안된 방식은 전동기의 전류 응답 특성으로부터 파악된 회전자 위치 정보를 이용하여 BLDC 전동기를 기동하는 방식으로, 압축기의 기동 부하 변동에 강인한 기동 특성을 가진다. 실험을 통하여 제안된 방식의 효과를 입증하였다.

  • PDF

Torque and Flux characteristics of The Direct Torque Control Method (직접토크제어 방식에서 전압 벡터의 토크 및 자속 특성 해석)

  • Kwak, YunChang;Park, Junhwi;Ahn, Jin-Woo;Lee, Dong-Hee
    • Proceedings of the KIPE Conference
    • /
    • 2014.07a
    • /
    • pp.251-252
    • /
    • 2014
  • 본 논문은 직접토크 제어에서 토크와 자속 오차에 따라 결정된 전압 벡터가 가지고 있는 자속 및 토크 출력 특성을 전압의 d-q 해석을 통해서 분석하고, 6섹터 방식과 12섹터 방식에서 각 전압에 의해 발생되는 토크 및 자속 특성을 회전자 위치에 따라 해석하였다. 또한, 전압벡터의 전압특성을 모의하기 위한 근사 전압함수를 제시하고, 근사전압함수를 통해 직접토크 제어 방식에서의 자속 및 토크 제어의 성능향상이 가능함을 실험을 통해 검증하였다.

  • PDF

A Study on the Drive Characteristics of SRM by 2-Phase Excitation Method (2상 여자방식에 의한 SRM의 운전특성에 관한 연구)

  • 문재원;오석규;안진우;이일천;황영문
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.3 no.4
    • /
    • pp.412-417
    • /
    • 1998
  • This paper suggests the drive characteristics of a Switched Reluctance Motor(SRM) by 2-phase excitation method. T This scheme excites 2 phases simultaneously, which is similar to 2-phase excitation method of a step motor. In this s scheme. the torque is produced by mutual inductances as well as self inductances. The abrupt change of a phase e excitation produces mechanical stresses and it results in vibration and noise. The acoustic noise is reduced remarkably t through the sequential phase excitation in the 2-phase excitation. Operational principle and characteristic comp없1son t to that of the conventional SRM show that this excitation scheme has some advantages including torque ripple and n noise reduction.

  • PDF

A Propose of the Extended AODV Ad Hoc Routing Protocol using the Heterogeneties of Const ituent Nodes (구성노드의 이질적 특성을 활용한 확장된 AODV Ad-Hoc 라우팅 프로토콜 제안)

  • 유환석;박준희;김상하
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.04a
    • /
    • pp.127-129
    • /
    • 2002
  • 인터넷에는 다른 하드웨어적 특성을 갖는 다양한 형태의 이동노드가 존재한다. 이러한 특성이 무선통신 과정에 반영되어 다양한 문제가 발생한다. 이동 노드로만 구성된 무선 ad-hoc 네트웍은 이와 같은 특성에 큰 영향을 받게 된다. 기존의 ad-hoc 네트웍 라우팅 프로토콜은 목적 노드에 도달하기 위한 경로의 발견과 관리에 연구가 집중되었으며, 최근 이동노드의 특성을 라우팅 과정에 반영하기 위한 연구가 시작되고 있다. 본 논들은 ad-hoc 라우팅 프로토콜에서 이동노드가 갖는 이질적 특성을 라우팅에 반영하고, 이를 AODV 라우팅 프로토콜에 적용하기 위한 메커니즘을 제안한다. 본 메커니즘은 이동노드의 특성을 이용한 Proactive 방식의 노드가 추가되어 일반 이동노드에게 다중 홉의 경로에 대한 패킷 전송을 대신하며 주변 이동 노드에게 다중 홉의 라우팅 정보를 제공한다. Reactive 방식의 노드는 Proactive 방식의 노드를 발전하고 이용하기 위해 기능을 확장하였다. 이를 통하여 안정적인 경로를 선택 할 수 있으며 ad-hoc 네트워크 망의 확장이 가능하다.

  • PDF

Optimum Design and Analysis of Property of Perpedicular Type Single Pole Write Head (수직 기록용 Single Pole Tipe Head의 최적화 설계와 Write Field 분석)

  • Won, Hyuk;Park, Gwan-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2003.04a
    • /
    • pp.47-49
    • /
    • 2003
  • 수직 기록 방식은 그 기록 방식의 차이로 인하여 수평 기록 방식에서 쓰여 오던 Write Head의 Design을 적용하였을 경우 기록 밀도를 높이는데 많은 문제점과 낮은 기록 밀도 상승률을 동반하게 된다. 따라서 수직 기록 방식의 자기 기록에서는 수직 기록 방식에 적합한 Write Head의 Design을 적용하여야만 한다. 본 논문에서는 3차원 유한요소법을 이용하여 수직 기록용 Write Head의 한 종류인 SPT Head(Single Pole Tip Head)를 최적 설계하여 그 Write Field의 특성을 분석 제시하였다. 또한 기록 Media의 차이에 따른 기록 특성을 분석하기 위하여 기존 Single Layer 방식과 SUL (Soft Magnetic Under layer)를 사용한 Double Layer 방식을 이용하였을 경우 SUL이 자기 기록에 미치는 영향에 대한 내용을 연구 분석하여 제시하였다.

  • PDF

Quality characteristics of clean rice with the processing system (클린라이스 제조방식에 따른 백미의 품질 특성)

  • Kim, Oui-Woung;Kim, Hoon;Lee, Hyo-Jai;Ahn, Jae Hwan
    • Food Science and Preservation
    • /
    • v.23 no.4
    • /
    • pp.522-529
    • /
    • 2016
  • Clean rice is useful to save time and labor force against washing rice in the household. Nevertheless the quality characteristics of the rice were not established well since the quality characteristics of the rice depend on types of the processing system. The aims of the current study were to understand the quality characteristics of clean rice prepared from the dry, semi-dry, and wet types of processing systems, and to suggest the appropriate processing system for production of clean rice. Here, we found that the quality of clean rice was improved with the increasing whiteness of rice by the dry type, although the whiteness of rice should be below 42 to satisfy 16.0 NTU of the turbidity for higher head rice ratio. Also, both the semi-dry and wet type systems showed higher ratio of head rice than the dry type system at below 16.0 NTU of the turbidity. These results imply that the wet type is more suitable for the place where rice is consumed fast, and the semi-dry type is more proper for long term storage of rice.

A Study on the Determinants of Downsizing Method in Small Manufacturing Firms (중소제조기업의 다운사이징 방식의 결정요인에 관한 연구)

  • Park, Kwang-Seo;Chung, Hee-Kyun
    • Management & Information Systems Review
    • /
    • v.30 no.2
    • /
    • pp.133-159
    • /
    • 2011
  • This study was conducted about the various forms of downsizing in small manufacturing firms such as lay-offs, honorary retirement, wage cuts, reduction of assets, merging of organizations with similar functions. Specially the study was conducted among small manufacturing companies to investigate which factors play a role in deciding which method to use. As result, the study found out the form of downsizing varies according to the characteristics of the small manufacturing companies. In other words, it is the size and the growth form of the company which influences the form of downsizing, rather than the management experience of the company. Based on the result of the study, small firms tend to prefer form of downsizing which will have short term or immediate effect, depending on the condition of their organization. Also, this kind of slim down on workforce has positive effect on the management achievement. However, there is also a negative effect on the moral of the members of the organization and the level of concentration in the work field. Therefore, it is better for small manufacturing companies to seek other long term means to increase its' productivity and renovation in management, and avoid method which will have direct effect on the moral of the members.

  • PDF

Physicochemical and Sensory Characteristics of Beef-bone Broths Prepared under Atmospheric Pressure and Overpressure (상압과 가압조건에서 제조한 소뼈 용출액의 이화학 및 관능 특성)

  • Moon, Sang Ha;Kim, Jaecheol;Hwang, Keum Taek;Cha, Yong Bum
    • Korean Journal of Food Science and Technology
    • /
    • v.47 no.6
    • /
    • pp.725-732
    • /
    • 2015
  • This study was conducted to compare the physicochemical and sensory characteristics of beef-bone broths prepared under atmospheric pressure (BBAP) and overpressure (BBOP). Beef-bone was boiled in water (bone/water=1:2, w/w) for 1, 2, 4, 6, and 12 h under atmospheric pressure and overpressure ($121^{\circ}C$, 1.25 atm). The BBOP broth samples were found to contain significantly higher amounts of solid, crude protein, crude ash, collagen, and chondroitin sulfate than the BBAP broth samples for a given boiling time (p<0.05). In addition, the Ca and Mg contents in the BBAP samples were higher than those in the BBOP samples, whereas the P, Na, and K contents were higher in BBOP than BBAP. The L value of BBAP was also significantly higher than that of BBOP (p<0.05). Further, as the boiling time increased, turbidity increased in the BBAP samples. In the quantitative descriptive analysis, the BBOP samples exhibited stronger brownness, transparency, meaty off-odor, meaty off-flavor, and sulfuric odor than the BBAP samples.

New Chaos Map for BER Performance Improvement in Chaos Communication System Using CDSK (상관지연편이변조 방식의 혼돈(Chaos) 통신 방식에서 비트오류율 성능 향상을 위한 새로운 혼돈 지도)

  • Lee, Jun-Hyun;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38A no.8
    • /
    • pp.629-637
    • /
    • 2013
  • Chaos communication systems have the characteristics such as non-periodic, wide-band, non-predictability of signals and easy implementation. There have been many studies about chaos communication systems because of these advantages. But, chaos communication systems have low BER(Bit Error Rate) compare to general digital communication system. Existing researches on chaos communication systems only analyze BER performance according to various chaos maps. There are no studies on analysis of BER performance according to PDF(Probability Density Function) of chaos maps. In this paper, we analyze the BER performance according to changing parameter, equation, and initial values of chaos map's PDF. In addition, we propose new chaos map to improve BER performance. Simulation results show that BER performance of CDSK(Correlation Delay Shift Keying) is changed when PDF of chaos map changed. And the proposed chaos map has a better BER performance compare to previous chaos maps such as Tent map, Logistic map, and Henon map.