• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.311-317
• /
• 2019

We first numerically analyzed the characteristics of a silicon-based grating structure for beam steering. The analysis includes the basic principle of the grating structure according to the wavelength, peak radiation angle, radiation efficiency, and full-width at the half maximum(FWHM) of the radiation angle. Based on the analysis, we propose a silicon-based grating structure integrated with distributed Bragg reflector(DBR) to obtain a high radiation efficiency and narrow beam width simultaneously. We performed the numerical optimization of the radiation efficiency and FWHM of the radiation angle according to the DBR position. By the design optimization using the proposed grating structure compatible with the complementary metal-oxide semiconductor(CMOS) process, we achieved a maximum radiation efficiency of 87.1% and minimum FWHM of radiation angle of $4.68^{\circ}$.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.10a
• /
• pp.269-270
• /
• 2016

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.7-15
• /
• 2007

This study aim to investigate image characteristics due to focus-grid and head phantom decentering from the armorphos silicon thin film transistor detector the fixed focus-grid is applied, wish to propose right use method of digital medical equipment. Acquired image according to focus-grid and head phantom position decentering using head phantom on armorphos silicon thin film transistor detector the fixed focus-grid is applied. acquired image evaluate pixel value, histogram, plot profile, surface plot using NIB (Image J) image analysis program and compared decentering image with standard image. Mean value and standard deviation value of focus-grid lateral decentering and duplex decentering of focus-grid and head phantom decreased by ratio, consequently increase of horizontality, diagonal decentering. also, deteriorated contrast of image because frequency of high pixel value decreases fairly. according increases decentering, image distortion phenomenon was increase, by next time, pixel mean value of head phantom decentering was no big change but horizontality, diagonal, mean value and standard deviation value of pixel decreased by ratio. Even if increase pixel noise of image because wide latitude and post processing ability of digital detector, radiotechnologist can not recognize. Therefore, radiotechnologist must recognize correctly the photographing factors which increases pixel noise on the grid system installation digital detector and should exam.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.11a
• /
• pp.192-193
• /
• 2009

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.2 s.12
• /
• pp.99-105
• /
• 2004

The structure systems with non-rigid member were classified by the composition type of line and surface members. As a result of the classification, there are 1-way cable structure, cable net and radial cable net structure in the line member system. And there are pneumatic structure and suspension membrane structure in surface member system. In addition, when the line and surface members are composed together, there is the hybrid membrane system which are divided into hanging type and supported type. In this paper, the Korean terms of structure systems with non-rigid member are recommended through this classification.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.1
• /
• pp.117-123
• /
• 2008

When it comes to clothing design, after the mid 20th century some internationally renowned designers began to recognize the pivotal role clothing materials play in attracting the hearts of customers. Accordingly, they started to take advantage of new clothing materials in the sector of clothing design. While the theme of fashionable clothing products shifts from style and color to clothing materials, fashion designers place the quality of materials at the center of clothing designs. Fashion designers also realize that good quality of materials should be used to boost the value of products as well as to satisfy the conditions of creativity, practicality and aesthetics. In particular, as the non-apparel industry in which clothing materials are the most important aspect between fashionable color, silhouette and details is enhancing their attention to develop various materials in order to meet the needs of customers, the fashion industry places a high premium on textile design which is the pinnacle of expressing emotion on clothing materials. In addition, the industry raises awareness of developing more sophisticated and differentiated materials. Our thesis covers the way how to apply $moir{\acute{e}}$ pattern to clothing design on the basis of research. In order to put that research into practical use, we produced textiles which effectively display $moir{\acute{e}}$ pattern. Before this process, we tried to ensure that radial grating created $moir{\acute{e}}$ pattern effects. To this end, the weaving process was applied, depending on whether light can penetrate textiles or not. Then, we manufactured test-products using $moir{\acute{e}}$ pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.550-557
• /
• 2003

In this paper, two dualband internal antennas for GPS/PCS handset are proposed. At first, the monopole antenna with parasitic dipole element is designed to print PCB of handset directly. At second, the antenna with bended loop structure is designed to bend to use internal space of handset maximumly. The proposed dualband internal antennas provide a 2:1 VSWR bandwidth of over 19.1 % which are possible to cover two bands at once. the antennas have a gain between -0.4 and 3.33 ㏈i at all bands and they have almost omni-directional patterns.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1923-1932
• /
• 2013

In order to solve the problem of severely distorted images from a wide-angle camera, we propose a calibration method which corrects a radial distortion in wide-angle images by estimation and validation of camera model. First, we estimate a camera model consisting of intrinsic and extrinsic parameters from calibration patterns, where intrinsic parameters are the focal length, the principal point and so on, and extrinsic parameters are the relative position and orientation of calibration pattern from a camera. Next we validate the estimated camera model by re-extracting corner points by inversing the model to images. Finally we correct the distortion of the image using the validated camera model. We confirm that the proposed method can correct the distortion more than 80% by the calibration experiments using the lattice shaped pattern images captured from a general web camera and a wide-angle camera.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.302-314
• /
• 2001

많은 비전 응용에서 카메라의 광축은 영상 평면과 직교한다는 가정을 한다. 그러나 가정아래 전통적인 왜곡 영상 보정 방법은 렌즈의 방사(radial) 왜곡과 이탈(decentering) 왜곡만을 고려하고 있다. 그러나 렌즈의 광축(optical axis)과 영상 켈리브레이션 평면이 직교하지 않을 경우는 평면 투명 변환과 카메라 자체의 렌즈 왜곡이 복합되어 나타나게 되므로 기존 방법만으로는 이러한 복합왜곡을 보정할 수 없다. 본 논문에서는 일방 방사왜곡 뿐만 나이라 평면 투명변환과 렌즈왜곡이 동시 존재하는 영상 시스템에서도 적용 가능한 왜곡 영상 자동 보정 방법을 제한한다. 제안한 복합 왜곡 모델은 평면 투명 변환 모델과 렌즈의 방사 왜곡 모델로부터 유도하고, 계수 추출 알고리듬은 비 선형 최소화 기법인 Levenberg-Marquart 방법에 기반을 둔다. 실험은 이상형 격자 영상에 임의 왜곡 계수를 적용한 영상과 WebCam 카메라의 실제 왜곡 영상을 가지고 실시하였고, 기존 방법과 제안한 방법의 보정율을 비교 평가하였다. 실험결과 제안한 방법은 렌즈 왜곡만 있는 경우에도 기존 방법보다 우수하였으며, 복합왜곡 환경에서도 97% 이상의 보정율로 아주 견고하게 적용 가능한 것으로 나타났다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.80-85
• /
• 2012

In this paper, a new planar folded UHF band RFID reader antenna is suggested. For the antenna suggested in this paper, 4 PIFA (Planar Inverted F Antenna) micro-strip structures are adopted. The size is $50mm{\times}50mm{\times}6.2mm$. The gain of the antenna is 1.1 dBi, the VSWR is 1.2:1, and the efficiency is 63.3 %. The radiation pattern is designed as upper direction. Identification distance for the RFID tags is improved by minimizing hand effects with properly integrating 4 PIFAs.