• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.392-397
• /
• 1998

PWR 원전의 냉각재 화학 및 체적제어 계통(CVCS) 정화 탈염기는 핵연료에서 방출된 핵분열 생성물질과 방사성 부식생성물을 제거하여 계통 내 방사능 준위를 낮추고, 부식을 유발하는 불순물을 제거하여 계통의 건전성을 유지하며, pH 조절제인 리튬($^{7}$ Li$_3$)의 농도조절을 통해 냉각계 수화학 환경을 최적으로 유지시킨다. 이를 위해 CVCS에는 정화용 혼상 탈염기와 $^{7}$ Li$_3$ 조절용 양이온 탈염기가 설치되었으며, 각각의 탈염기는 독립적인 기능을 수행한다. 이는 원전 운전 중 중성자와 붕소($^{10}$ B$_{5}$ )의 핵반응으로 생성된 $^{7}$ Li$_3$3 의 회수가 불가능하기 때문에 정화 탈염기에는 값비싼 $^{7}$ Li$_3$ 포화형 수지를 충전하여야 한다. Pn 원전은 연료교체를 위해 주기적으로 연료계장전 기간을 갖으며 이에 따라 원자로 기동 수화학, 운전중 B/Li 농도조절에 의한 pH 화학, 원자로 정지화학 등의 주기적인 냉각재 수화학 관리를 해오고 있다. 본 연구에서는 효율적인 정화탈염기의 운영방안을 제시함으로 운전중 붕소의 핵분열로 생성되는 $^{7}$ Li$_3$ 의 회수가 가능하고 수지의 사용량 절감으로 수지폐기물 발생량 저감화를 이를 수 있을 것으로 기대된다.

• Journal of Software Engineering Society
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2012

Characteristic of decommissioning target facility investigate and understand is very important. because radioactive materials occurs in the decommissioning and dismantling, so it is difficult to use a general dismantling method. Decommissioning nuclear facilities, the characteristics of the target of research to predict the amount of decommissioning waste, decommission projects costing is largely utilized. For this purpose, we developed DEFACS(Decommissioning Facility Characterization DB System) that manage characteristic of decommissioning target facility. But nuclear facility decommissioning takes long time. so we inevitably developed system during decommissioning works, it occurs many system changes. For this reason, it is difficult to apply general development process, so we take CBD process that divide CD(Component Development) and CBSD(Component Based Software Development) for handling change of requirement. it make Component of the overall system for changes to minimize changes by strengthening the independence of components and processes due to changes in requirements were to minimize stopping of the process.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.115-122
• /
• 2018

In this paper, the feasibility of recycling concrete waste as a method to reduce final disposal amount of wastes generated through decommissioning of nuclear power plant has been analyzed based on experimental results of existing literature. When recycled concrete waste was used as recycled aggregate, it was investigated through literature that the concrete strength decreased by 30~40% depending on the mixing ratio. It was also investigated that concrete with recycled aggregate can be used as a structural material when the quality of recycled aggregate is well managed since no significant problem was found. When recycled cement produced from concrete waste was used, the strength of concrete or mortar decreased considerably as the recycled cement content increased. Therefore, it can be concluded that concrete or mortar with recycled cement can be used as a filling material for final disposal of large radioactive waste rather than for structural use. This paper is expected to be useful for reduction on disposal volume and decommissioning cost for nuclear power plants such as Kori 1.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.339-350
• /
• 2007

Status on the spent nuclear fuel management policy and R&D plan of the major countries is surveyed. Also the prospect of the future R&D plan is suggested. Recently so-called fuel cycle nations, which have the reprocess policy of the spent fuel, announced new spent fuel management policy based on the advanced fuel cycle technology. The policy is focused to transmute highly radioactive material and material having a very long half-life, and to recycle the Pu and U contained in the spent fuel. In this way the radio-foxily of the spent fuel as well as the amount of the high level waste to be eventually disposed can greatly be reduced. Most of countries selected the wet process as a primary option for the treatment of the spent fuel since the advanced wet process, which is based on the existing PUREX process, looks more feasible as compared with the dry process. The wet process, however, is much more sensitive in terms of proliferation-resistance compared with the dry process. The pure Pu can easily be obtained by simply modifying the process. On the other hand the pure Pu can not be extracted in the dry process based on the high temperature molten salt process such as a pyroprocess. Even though the pyroprocess technology is very premature, it has a great merit. Thus it is necessary for Korea to have a long term strategy for pursuing a spent fuel treatment technology with a proliferation resistance and a great merit for the GEN-IV fuel cycles. Pyroprocess is one of the best candidates to satisfy these purposes.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.3
• /
• pp.179-189
• /
• 2014

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. An electrolytic reduction of the pyroprocessing is a process to reduce oxides into metals using LiCl as an electrolyte and requires a post-treatment process due to the inclusion of residual salt in porous metal products. A vacuum distillation has been adopted for various molten salt systems and could be applied to the post-treatment process of the electrolytic reduction. The residual salt in the metal products includes LiCl, alkali chlorides, and alkaline earth chlorides. In this paper, vapor pressures of chlorides have been estimated and the composition changes on the residual liquid during the vacuum distillation process have been calculated. A model combining a material balance and vapor-liquid equilibrium relations has been proposed under a constant vapor discharging flow rate and liquid composition changes have been calculated using the vapor pressures with respect to a dimensionless time. The behaviors have been compared with temperature and molten salt composition changes to simulate the process condition variation. The distillation of the residual salt has been dominated by LiCl which is the main component of the salt and CsCl of which vapor pressure is higher than that of LiCl would be readily removed. RbCl exhibits similar vapor pressure with LiCl and maintains its composition. However, $SrCl_2$ and $BaCl_2$ of which vapor pressures are much lower than that of LiCl are concentrated with time and expected to be possibly precipitated during the distillation when the initial compositions are increased.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.309-322
• /
• 2007

This study deals with the irradiation effects on some selected components which are being used in an Advanced Spent Fuel Conditioning Process (ACP). Irradiation test components have a higher priority from the aspect of their reliability because their degradation or failure is able to critically affect the performance of an ACP equipment. Components that we chose for the irradiation tests were the AC servo motor, potentiometer, thermocouples, accelerometer and CCD camera. ACP facility has a number of AC servo motors to move the joints of a manipulator and to operate process equipment. Potentiometers are used for a measurement of several joint angles in a manipulator. Thermocouples are used for a temperature measurement in an electrolytic reduction reactor, a vol-oxidation reactor and a molten salt transfer line. An accelerometer is installed in a slitting machine to forecast an incipient failure during a slitting process. A small CCD camera is used for an in-situ vision monitoring between ACP campaigns. We made use of a gamma-irradiation facility with cobalt-60 source for an irradiation test on the above components because gamma rays from among various radioactive rays are the most significant for electric, electronic and robotic components. Irradiation tests were carried out for enough long time for total doses to be over expected threshold values. Other components except the CCD camera showed a very high radiation hardening characteristic. Characteristic changes at different total doses were investigated and threshold values to warrant at least their performance without a deterioration were evaluated as a result of the irradiation tests.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.91-102
• /
• 2020

According to the Korea Radioactive Waste Agency's (KORAD's) medium and low level radioactive waste management implementation plan, the Domestic 3rd Step Landfill Disposal Facility has planned to accept a total of 104,000 drums (2 trenches) of very low level radioactive waste (VLLW), from the decommissioning site from April 2019 - February 2026 (total budget: 224.6 billion Won). Subsequently, 260,000 drums (5 trenches) will be disposed in a 34,076 ㎡. Accordingly, KORAD is preparing a waste acceptance criteria (WAC) for this facility. Every disposal facility for VLLW in other countries such as France and Spain, operate their WAC for each VLLW facility with a reasonable application approach, This, paper focuses on analyzing the WAC conditions in VLLW sites in the USA and discusses whether these can be met in domestic VLLW WAC. It also helps in the preparation of WAC for the 3rd Step Landfill Disposal Site in Gyeongju, since the USA has prior experience on decommissioning nuclear waste.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.191-197
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) has developed a safeguards technology for pyroprocessing based on the Safeguards-By-Design (SBD) concept. KAERI took part in a Member-State Support Program (MSSP) to establish a pyroprocessing safeguards approach. A Reference Engineering-scale Pyroprocessing Facility (REPF) concept was designed on which KAERI developed its safeguards system. Recently the REPF is being upgraded to the REPF+, a scaled-up facility. For assessment of the nuclear-material accountancy (NMA) system, KAERI has developed a simulation program named Pyroprocessing Material Flow and MUF Uncertainty Simulation (PYMUS). The PYMUS is currently being upgraded to include a Near-Real-Time Accountancy (NRTA) statistical analysis function. The Advanced Spent Fuel Conditioning Process Safeguards Neutron Counter (ASNC) has been updated as Non-Destructive Assay (NDA) equipment for input-material accountancy, and a Hybrid Induced-fission-based Pu-Accounting Instrument (HIPAI) has been developed for the NMA of uranium/transuranic (U/TRU) ingots. Currently, performance testing of Compton-suppressed Gamma-ray measurement, Laser-Induced Breakdown Spectroscopy (LIBS), and homogenization sampling are underway. These efforts will provide an essential basis for the realization of an advanced nuclear-fuel cycle in the ROK.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.3-12
• /
• 2008

Purpose: Contaminated clothes and bedclothes of patients by mouth or with excrement are produced after Radioisotope $^{131}I$ treatment. In this paper, patient's clothes and bedclothes contaminated by radioactivity measured and radioactive waste wish to calculate optimum storage period. Material and Methods: The whole area of patients' clothes and bedclothes measured 70 patients, 12 males and 58 females, who had radioisotope $^{131}I$ therapy between August 2005 and February 2006. Assuming contamination is evenly distributed, the radioscope used to measure up to social toleration level at 7 day intervals. Results: Each optimum storage period of control group of 60 case and non control group of 10 case were average $44{\pm}16$ days and $32{\pm}13$ days. Decontamination effect of surface contamination for radioactive waste was average $83.66{\pm}15.15%$. Conclusion: It is important that classify radioactive waste according to difference of surface contamination. Result of this research, handling radioactive waste in optimum storage period may be useful.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.139-144
• /
• 2009

The microseismic monitoring system with wide range of frequency has been operating in real time and it is remotely monitored at indoor and on-site for one year. This system was constructed and established in order to secure the safe and effective operation of the KAERI Underground Research Tunnel(KURT). For one year monitoring work, total 14 events were recorded in the vicinity of the KURT, and the majority of events are regarded as ultramicroseismic earthquake and artificial impacts around the tunnel. The major event is the magnitude 3.4 earthquake which was centered around Gongju city, Chungnam Province. It means that there is no significant evidence of high frequency microseismic event, which is associated with fracture initiation and/or propagation in the rock mass and shotcrete. Three components sensor was applied in order to analyze and define the direction of vibration as well as an epicenter of microseismic origin, and also properly designed and installed in a small borehole. This monitoring system is able to predict the location and timing of fracturing of rock mass and rock fall around an undreground openings as well as analysis on safety of various kinds of engineering structures such as nuclear facilities and other structures.