• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.77-81
• /
• 2005

본 논문은 열차제어시스템의 고장률을 정량적으로 예측하고 입증하기 위한 방안을 제시한다. 고장률의 정량적 예측은 시스템 개발단계에서 하부시스템별 고장발생확률을 예측하여 목표 고장률과 비교하고, 고장률이 높은 하부시스템의 설계를 보완하기 위함이다. 시제품이 완성된 후에는 예측된 고장률의 입증을 위해 시운전을 통한 고장데이터를 분석하거나 신뢰성시험을 통해 고장률의 예측치를 입증한다. 본 논문에서 제시하는 열차제어시스템 고장률예측과 입증은 철도신호시스템 신뢰성, 가용성, 유지보수성, 안전성관련 규격인 IEC62278의 시스템 수명주기별 신뢰성활동을 근거로 하며, 전자부품으로 구성된 시스템고장률예측은 미국방부 전자부품 고장률예측 지침인 MIL-HDBK-217을 기준으로 사용하였다.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.52-62
• /
• 2009

This research was carried out to formulate environmentally friendly wood preservatives with okara and to investigate the effects of the acid concentration used for the hydrolysis of okara and salt type on the decay resistance of the preservatives. Okara-based preservatives were formulated with okara hydrolyzates, which were prepared with 0, 1%, and 2% sulfuric acid at $25^{\circ}C$ for 1 hr, and salts such as copper chloride and/or sodium borate. The preservatives were treated into wood blocks by vacuum-pressure method, and then the treated wood blocks were leached in $70^{\circ}C$ hot water for 72 hrs. The fungal treatments of the leached wood blocks were conducted by brown-rot fungus, Tyromyces palustris, and white-rot fungus, Trametes versicolor, to examine the decay resistance of the preservatives. As the acid concentration used for hydrolysis of okara increased, the treat-ability and decay resistance of the preservatives were improved, which the leachability was decreased. Wood blocks treated with the okara/copper or okara/copper/borax, showed very good decay resistance against T. palustris and T. versicolor. However, wood blocks treated with the okara/borax and okara-free preservative solutions, were observed the fungal decay by T. palustris. The optimal conditions for the preparation of okara-based wood preservatives were formulated with okara hydrolyzed with 1% sulfuric acid, copper chloride and borax.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.126-132
• /
• 2001

This research is carried out to investigate the formation and preservative effectiveness of inorganic substance, calcium carbonate($CaCO_3$), in wood. The specimens were prepared by the impregnation with saturated solutions of potassium carbonate($K_2CO_3$) into the wood followed by precipitation in saturated solutions of calcium chloride($CaCl_2$) for 24h, 72h and 120h, and then they were leached in instrument flowing with water for 24h. The weight percent gains of $K_2CO_3$ solution impregnated specimens reached approximately a maximum value (108.1%) by 72h precipitation in $CaCl_2$ solutions. Inorganic substances were observed to he produced in the lumina of tracheids of specimens. From these inorganic substances filling in the tracheids, characteristic X-rays of calcium(Ca-$K_{\alpha}$) were detected by energy dispersive X-ray analyzer. Moreover, it was shown from a leaching treatment that these substances could not he leached easily from the specimens. Therefore, they were could he considered to be insoluble calcium carbonates. The weight losses of the prepared specimens were hardly occurred by test fungi attacks. Thus inorganic substances in specimens can be said to have preservative effectiveness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.745-748
• /
• 2003

HLA-RTI is Middleware for the distribute simulation that developed in the US Department of Defense. This provides fast accomplishment speed and reliability than distribute simulation Middleware by transfer. However, DDM(Data Distribution Management) service is used as data filtering technology in the existing HLA-RTI. As for this, the problem that network traffic increases in data exchange between the mobility simulation objects is generated. it proposes applying agent technology to the mobility simulation object in order to solve these problems in this paper in this. And this paper applies that to practical simulation and analyzes performance between each data filtering technology with comparison.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1171_1172
• /
• 2009

전자부품으로 구성된 제어기의 신뢰성에 대한 연구는 미국방부를 중심으로 1960년대부터 연구되었으며, 철도에서는 유럽을 중심으로 1990년대부터 연구되었다. 특히, 한국에서는 2000년대 이후부터 신호설비 신뢰성에 대한 연구가 시작되어 과거 신뢰성 정보가 없는 노후 신호설비를 대상으로 효율적인 유지보수를 위한 수명평가가 요구되고 있다. 본 연구에서는 부품단위 고장률 또는 운영시 발생된 고장정보와 같이 신호설비의 신뢰도가 지속적으로 모니터링 및 분석정보가 존재하지 않고 장기간 사용된 노후신호설비에 대한 수명을 예측하기 위한 방안을 제시한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.271-284
• /
• 2013

최근 현대 무기체계는 최첨단 기술로 인한 무기체계 개발 속도 증가와 획득환경의 다변화와 더불어 이에 대한 위험도 동시에 증가하고 있다. 이에 따라 미국방부는 무기체계의 수명주기를 고려하여 시험평가를 지속 적용토록 강조하고 있다. 따라서 기존의 무기체계 시험평가 프로세스에서 다루는 시스템 설계에 대한 단계별 안전 활동의 강화의 필요성 역시 강조되고 있다. 그 중에서도 무기체계 개발의 핵심 활동에 해당하는 체계개발 단계는 양산에 들어가기 전의 최종 활동으로서 제대로 수행되어야만 초기에 의도한 무기체계 개발의 목적을 달성할 수 있을 것이다. 본 논문에서는 시스템 안전성 요소를 고려한 시험평가 프로세스의 개선사항 도출과 모델링을 통해 무기체계 시스템인 무기체계를 대상으로 적용 및 조정 구축에 대한 내용을 기술하고 있다. 본 연구의 결과를 토대로 향후 시험평가 기간의 단축 및 비용 절감과 데이터의 관리 및 추적 기능을 개선함으로써 무기체계 개발 후의 안전사고 발생 가능성을 줄일 수 있을 것으로 기대된다.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.77-84
• /
• 1992

The purpose of this study was to evaluate the diagnostic value of panoramic radiography for diagnosis of temporomandibular joint. Five dry skulls were selected for this study and artificial osteophyte was attached to four different areas of the mandibular condylar head. And then, the author had taken panoramic radiographs with the head in conventional position, 25㎜ forward position and reverse position in mouth opening state. Three dental radiologists evaluated the radiographic images of osteophyte in 60 panoramic radiographs. The results were as follows: In conventional position, osteophyte on the anterolateral and anterocentral area of the condylar head was best seen (p<0.01). In 25㎜ forward position, osteophyte on the anterocentral and anteromedial area was best seen (p<0.05). In reverse position, osteophyte on the anterocentral area was best seen (p<0.05). Osteophyte on anteromedial area was better seen in 25㎜ forward position than in conventional position (p<0.05).

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.7-18
• /
• 2016

This study evaluated the toxicity of the burning gas from the synthetic wood products used in housings or warehouses. The combustion products of five materials, viz. impregnated laminated board, MDF, Douglas fir plywood, core plywood, and Lauan retardant, were analyzed using SEM, FTIR and a Cone Calorimeter. For the Lauan retardant, 256,965 ppm of carbon dioxide ($CO_2$) and 1,475 ppm of sulfur dioxide ($SO_2$) were measured, which are 2.5 times and 3.6 times as high as their lethal concentrations of 100,000 ppm and 400 ppm, respectively. For the impregnated laminated board, 1,569 ppm of nitrogen dioxide ($NO_2$) was measured, which is 6 times as high as its lethal concentration of 250 ppm. For MDF, 795 ppm of ammonia ($NH_3$) was measured, which is higher than its lethal concentration of 750 ppm. As a result, most internal-finishes generated toxic combustion products at levels higher than their lethal concentrations, which underlines the importance of the selection and manufacturing of internal-finish materials.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.53-63
• /
• 2005

This study attempted to obtain the basic data of utilizable possibility of preservative treated wood as a material used in a marine ranch. To evaluate the leaching stability of CCA-, CCFZ-, and ACQ-treated woods in seawater, the specimens treated with 2% and 3% (w/v) of CCA, CCFZ, and ACQ were exposed to deionized water, synthetic seawater and natural seawater for 41 days and then each component released was periodically determined. There was little amount of copper and chromium released from CCA-treated wood exposed in both deionized and seawater. Although relatively large amount of arsenic was released from CCA-treated wood, the release rate in seawater was lower than that in deionized water. The release rate of chromium and zinc from CCFZ-treated wood were somewhat greater in deionized water, but lower in seawater than in deionized water. Retention level and salinity of synthetic seawater had little effect on the release rate of components. The ACQ-treated wood had greater copper release than CCA- and CCFZ-treated wood, and the amount of copper released did not affected by leaching media used.