• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.215-221
• /
• 2020

Navigation lights used in supersonic aircraft are used to identify the direction and location of the aircraft. The color of the navigation lights and location of installation are defined by aviation law as red for the left wing, green for the right wing, and white for the tail. Navigation lights operate in BRT and DIM modes. BRT is the brightest mode, and DIM is an output with dimmed brightness. Navigation lights serve to prevent aircraft collisions and are very important for stability and location identification. One phenomenon is that the inlet and tail navigation lights flicker abnormally. In this study, fault tree analysis was performed in two stages. The first step was derived from three causal factors, the second step developed five improvements, and the optimal improvement plan was drawn. The navigation lights confirmed that the initial input power was unstable as the main cause of abnormal flickering. As an improved method, the circuit was adjusted to stabilize the initial power, and it was confirmed that flickering did not occur as a result of the tests under the same conditions.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.291-294
• /
• 2014

본 논문에서는 Android를 기반으로 NFC(Near Field Communication) 스티커를 태그 하는 행위를 통해 별도의 터치 없이 자신이 원하는 여러 작업들을 실행할 수 있는 NFC의 장점을 이용하여 운전 중/ 강의 중 등의 특정 상황에서 사용자가 원하는 작업을 빠르고 간단하게 할 수 있도록 하는 맞춤 NFC 태그 애플리케이션을 개발하였다. 본 애플리케이션의 기능은 한 번의 태그만으로 운전 중에 필요한 작업(구글지도, 뮤직플레이어 등), 강의에 필요한 작업(모바일 학생증, 화면밝기 최대, 진동모드 등)을 동시에 적용할 수 있으며 자신의 연락처 정보를 상대방의 단말기에 저장 시킬 수 있고, 제공되는 작업 이외에 사용자가 원하는 작업을 정의할 수 있도록 하였다.

• Journal of radiological science and technology
• /
• v.38 no.1
• /
• pp.7-15
• /
• 2015

A ultrasonic probe is very important in medical ultrasonic image, but the frequency of probe defects are often. Therefore practical tools for probe based ultrasonic QA should be developed. Advanced research on the effects of the probe defects on the quality of ultrasonic images is required. This study has investigated the effects of the defects in the probe elements influence Doppler images in the medical ultrasonic scanners. Especially the defects in a set of adjacent elements(SAE) electrically disconnected influence Doppler images were tested. The results show Doppler brightness and velocity became rapidly reduced as the defected elements is located centrally, as the defected elements is activated. The more the defected elements increased, the more Doppler brightness and velocity increased. As a set of the element disconnected moved, it appeared Doppler velocity starting to decrease and then was followed by brightness. The strength is not consistent with the velocity in the number and location of the defected elements. The defects in the probe elements influence Doppler velocity when the defected elements got out of the elements activated at Doppler mode.

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.213-218
• /
• 2017

Recently, as the number of high-risk pregnancies increases, the use of new techniques such as Doppler, which have higher acoustic power than in the past, has been increasingly used in prenatal diagnosis and guidelines have been set up by various organizations to prevent excessive exposure. Therefore, in this study, we tried to investigate the temperature change of the body surface for each test mode according to the long time ultrasound examination and to examine the exposure time which is not influenced by the thermal effect. B mode, C mode, and PD mode according to time, and the temperature difference between exposed and unexposed sites were compared. As a result, the B mode showed a significant difference in the temperature change from 10 minutes, 50 minutes after exposed, 20 minutes from the C mode, and 30 minutes from the PD mode (p<0.01). In all three modes, the temperature difference was different (p<0.000), and PD mode was the most sensitive to temperature change. Also, it was found that the temperature rise time was shortened with the increase of the ultrasonic exposure time. Therefore, it is recommended that ultrasonography to observe the embryo or fetus should be used only for diagnostic purposes, avoiding excessive test time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.48-56
• /
• 2006

This paper introduces design and implementation of digital photo kiosk system, digital photo printing system, with auto color correction module that considers gamut between touch screen and output device, digital photo printer, to provide user-preferred media. This module performs media correction function to service high quality contents for image captured by digital camera and mobile phone camera. Since it is implemented as LUT for real-time processing, the system offers one-touch interface to user. As a result of implementation, this kiosk system provides user-favorite photo because of black and white mode, sepia mode, and brightness and contrast adjustment. Also it can gives smooth tone transition and photos of similar color to captured image due to auto color correction module.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.40-42
• /
• 2010

최근 3DTV 등의 3D 디스플레이의 공급으로 기존의 입체 콘텐츠뿐만 아니라, 일반 2D 영상도 자동적으로 입체 콘텐츠로 변환하여 3D로 시청할 수 있다. 이러한 콘텐츠를 시청할 때에 주로 사용하는 3D 디스플레이에는 자체적인 UI를 내장하고 있는데, 입체 모드에서의 이러한 UI를 3D로 변환하여 사용할 수 있는 3D UI기술에 대한 관심이 높아지고 있다. 본 논문에서는, 3D UI의 관심도 증가에 따라 좀 더 편리하고 이해도가 높은 3D UI의 개발 방법에 대하여 제안한다. Directshow를 이용하여, 문자와 UI 배경을 합성한다. 여기에 UI의 투명도, 시차, 밝기 등을 조절 가능하게 하여 사용자의 편의에 따라 선택할 수 있게 한다. 사전에 입체로 제작된 실험 영상을 실행하여 그 위에 메뉴 화면, 메뉴 글씨 등을 띄워 입체감 있는 3D UI를 제작, 증강을 체험할 수 있는 3D UI 플레이어를 구현한다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.77-77
• /
• 2003

CT와 MRI의 단면 영상을 대상으로 영상분할 (Image segmentation)과 Image registration방법을 이용하여 인체 모델을 개발 하고자 한다. 우선 인체의 Head와 Neck부분의 CT와 MR 영상을 얻어 뼈, 근육, 인대, 그리고 그 밖의 장기의 해부학적 영상 특징을 분석하였다. 인체의 Head와 Neck 부분에 대한 CT와 MR 영상에 대해 각 부위별로 ROI(region-of-interrest)를 설정하였고, 각 volxel 마다 3차원 좌표를 계산할 수 있는 소프트웨어를 개발하였다. 특히 각 해부학적 영상에서 부위별로 CT 번호를 분석하고, pulse sequence에 따른 MRI 영상의 부위별 특정을 분석하였다. 이 분석한 자료를 바탕으로 영상 분할을 하였다. 영상 분할전에 각종 잡음(noise) 제거 및 영상 분할을 효과적으로 처리하기 위해 기본적인 영상처리 (filtering)를 구현하였고, 대조도(contrast) 및 밝기(brightness)를 조절할 수 있게 프로그램을 구현하였다. 영상 분할 방법 중 선(line) 및 에지(edge) 의 검출 방법, 문턱치화(threshold) 방법, 영역확대(region growing) 방법으로 영상 분할을 해봄으로써 우리의 인체 모델링 개발에 가장 적합한 영상 분할 알고리듬 방법을 찾도록 시도하였다. 결과적으로 말하면, 한가지 방법의 알고리듬을 쓰는 것보다는 인체의 부위에 따라 두 가지 이상의 알고리듬 방법을 쓰는 것이 원하고자 하는 부위를 영상 분할하는데 더 효과적이다는 것을 알게 되었다. 우리의 연구 과제에서는 영역확대(region growing) 방법과 문턱치화 방법, 모드법(피크니스, 밸리)의 알고리듬을 이용하여 영상 분할을 한 결과 우리가 얻고자 하는 인체 부위별 중 근육과 뼈를 구별하는데는 별 무리가 없었으나, 인대 및 기타 장기를 구별하는데는 어려움을 겪게 되었다. 이후에 좀더 알고리듬을 연구하여 이번 연구에서 구별하기 어려운 장기 부분도 구별 할 수 있도록 노력하겠다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.129-135
• /
• 2015

This study, in the operation of street lamp, suggests appropriate algorithm to extend the number of days of street lamp operation as much as possible if the number of sunless days continues and experimentally determines the value of Weather Factor necessary for this algorithm. This is conducted by reducing electricity consumption and securing battery remains through the use of standby power mode, in which maximum amount of light is maintained if there is a pedestrian, and constant brightness is maintained without utilizing maximum electric power if no pedestrians exist, with the application of WFactor value created by the algorithm considering weather forecast and amount of sunlight.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.504-513
• /
• 2009

This paper proposes the new type LED driver modularization for illumination LED driver. The proposed LED driver circuit insulates a hot GND of AC input power and a cold GND of LED driver part by using a fly-back converter. In order to control easily the current of the LED, the fly-back converter is operated in the discontinuous mode with excellent dynamic characteristics, and the characteristics of the LED are verified after the closed loop control is performed using a KIA2431. The LED driver module allows the wide AC power input ranges and realizes the burst dimming function which directly regulates a PWM control IC. This paper describes the operation principle of the LED driver module and it is proved the usefulness through the real model with experimentation. Besides, this paper proposes the multi-channel LED driver which the miniaturized and modularized LED driver module are connected by parallel, and verified its propriety by experiments.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.401-410
• /
• 2008

Multiview Video Coding contains a macroblock-based illumination compensation tool which can compensate the variations of illuminations according to view or temporal directions. Thanks to illumination compensation tool, the coding efficiency of Multiview Video Coding has been enhanced. However illumination compensation tool also generates additional subjective drawbacks of the blocking artifacts due to macroblock-based compensations of mean values. A deblocking filtering method for Multiview Video Coding which is the same as in H.264/AVC does not consider illumination difference between the illumination compensated blocks, thus it can not effectively eliminate the blocking artifacts. Therefore, this paper analyzes the phenomena of blocking artifacts caused by illumination compensation and proposes a method which can effectively eliminate the blocking artifacts with the minimum changes of the H.264 deblockding filtering method. In the simulation results, it can be easily found the blocking artifacts are clearly eliminated in the subjective comparisons, and the average bit-rate reduction is up to 1.44%.