• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.321-326
• /
• 2006

Thermal degradation of styrene dimer fraction (SDF, main compound: 47 wt% of 1,3-diphenylpropane), 5~15% of total products produced during decomposition of waste expanded polystyrene (WEPS) was investigated. Reaction condition of $360^{\circ}C$, and 152 kPa to 202 kPa was an optimum for high pressure degradation. Under this operating condition, the yield of oil was 73.8% and the selectivities to Ben, Tol, EB, SM, and AMS were 0.4, 30.9, 15.0, 19.6, and 4.2%, respectively. Non-catalytic fixed bed continuous degradation was conducted at reaction temperatures of $510{\sim}610^{\circ}C$ and contact time ranges of 2~24 min, where the yield was increased by increasing of reaction temperature and contact time. A $Cr_2O_3$ catalyst showed the highest activity and SM yield among acid, base, and redox catalysts. The conversion of 74.6% and the yield of Ben, Tol, EB, SM, and AMS were 0.4, 21.6, 9.7, 17.9, and 3.5%, respectively at $560^{\circ}C$ and contact time of 24 min. It is thought that styrene is converted to EB and other secondary products throughout the formation of diradicals of styrene.

• Geotechnical Engineering
• /
• v.12 no.3
• /
• pp.99-108
• /
• 1996

The physical and chemical properties of polyurethane-yieding twofomponent liquid injection mixture and those of the resulting polyurethane solid foam for chemical grouting are investigated. The chemical experiments on the factors influencing the properties of polyurethane show that the behaviors of polyurethane-yielding liquid material and those of the produced polyurethane solid foam are greatly affected by the ground conditions such as temperature, water content and density of soil. The ground reinforcing and water -blocking effects of polyurethane grouting are examined through field case history of tunnel ericavati on of the subway under construction.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.31-35
• /
• 2016

For reaction injection molding (RIM) polyurethane was mixed in the mixing head by impingement mixing, injected into the mold, and cured quickly, as soon as the mold is filled. The shape of the nozzle in the mixing head is critical to improve the quality of polyurethane. To achieve homogeneous mixing, an intensive turbulence energy in the mixing nozzle is essential. In this study, a mixing nozzle for RIM was designed, and mixing efficiency was investigated based on experiment. Experiments were conducted with different combinations of nozzle tips and exit diameter to measure the mixing efficiency by measuring jet force and investigating mixing image with high speed camera. Jet force increased gradually and reaches steady state conditions. The jet force depended on shape of nozzle tip and outlet sizes. These results suggest that optimized nozzle configurations are necessary for high efficiency mixing with RIM.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.554-554
• /
• 2009

지구온난화는 범지구적 환경문제로 매우 빠른 속도로 진행되면서 그 심각성을 더해가고 있다. 특히 해수면 상승이나 대형 태풍, 홍수, 가뭄 등의 이상기후가 빈번하게 발생되며 생태계에도 심각한 타격을 주고 있다. 이러한 지구온난화를 유발하는 물질들에 대해 도쿄의정서(Annex A)에 6대 온실가스($CO_2$ (이산화탄소), 메탄($CH_4$), $N_2O$(아산화질소), PFC(불화탄소), HFC(수소화불화탄소), $SF_6$(육불화황))로 정의 하여 규제대상으로 분류하고 있다. $CO_2$를 제외한 Non-$CO_2$ 온실가스들은 배출량이 $CO_2$에 비해 매우 낮지만 GWP(지구온난화지수)가 매우 커 지구온난화에 미치는 영향이 상당하다. 최근 이산화탄소 이외에 지구온난화 문제를 일으키는 온실가스에 대한 많은 관심으로 대상가스의 처리 또는 재활용을 위한 신기술 및 신공정 개발에 박차를 가하고 있다. 온실가스 중 HFCs는 GWP가 1300으로 미량의 배출로도 심각한 기후변화를 일으킬 수 있는 물질로, 우리나라의 경우 1990년 이후 HFCs 배출량 증가율은 연 평균 4.9% ~ 13.8%이다. 국내외 온실가스 처리기술은 대부분 CO2에 대한 연구개발 및 실증화가 지배적이고, non-CO2에 대한 처리기술 개발수준은 미흡할 뿐만 아니라 본 연구 대상인 HFCs 의 경우에는 처리기술 연구개발이 전무하다. 특히 HFCs는 냉매 또는 발포제로 사용되는데 일반적으로 사용 후 특별한 처리과정 없이 대기중으로 배출된다. 본 연구에서는 non-CO2 가스인 HFC-134a 를 대상으로 혼합가스에서 분리 회수를 위해 하이드레이트 기술을 접목시켜 경제적, 친환경적인 기술개발을 목적으로 한다. kinetic 반응장치와 고압반응기 및 magnetic drive system 을 이용하여 stirring speed와 driving force에 따른 HFC-134a 하이드레이트 형성속도의 상관관계를 제시하고자 한다.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.363-370
• /
• 2016

Lightweight geopolymers are more readily produced and give higher fire resistant performance than foam cement concrete. Lowering the density of solid geopolymers can be achieved by inducing chemical reactions that entrain gases to foam the geopolymer structure. This paper reports on the effects of adding different concentrations of aluminum powder on the properties of cellular structured geopolymers. The apparent density of lightweight geopolymers has a range from 0.7 to $1.2g/m^3$ with 0.025, 0.05 and 0.10 wt% of a foaming agent concentration, which corresponds to about 37~60 % of the apparent density, $1.96g/cm^3$, of solid geopolymers. The compressive strength of cellular structured geopolymers decreased to 6~18 % of the compressive strength, 45 MPa of solid geopolymers. The microstructure of geopolymers gel was equivalent for both solid and cellular structured geopolymers. The workability of geopolymers with polyprophylene fibers needs to be improved as in fiber-reinforced cement concrete. The lightweight geopolymers could be used as indoor wall tile or board due to fire resistance and incombustibility of geopolymers.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.115-122
• /
• 2012

Polyurethane foams were synthesized with different contents and kinds of catalysts to know change of properties under various NCO index. UTM(universal testing machine), DSC(differential scanning calorimetry), SEM(scanning electron microscope) and FT-IR(Fourier transform spectroscopy) were used for studying the PUF's physical properties change. Compressive strength of PUF increased with increasing contents of catalyst. Glass transition temperature(Tg) and compressive strength of PUF using PC-8 and 33LV catalyst, increased with increasing NCO index at the aging. According to the results of Infrared spectral analysis, reduction of NCO peak was found in gelling catalyst, because unreacted NCO reacted with polyurethane. Although Tg and compressive strength of PUF using TMR-2, unchanged with increasing NCO index at the aging, because trimerization of isocyanate.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.7-13
• /
• 2020

In this study, water glass was applied as a coating material to a rigid polyurethane foam to improve the flame-retardant properties of the foam. The heat release rate of the cone calorimeter of the urethane foam, in which the inorganic water-glass coating layer was applied, decreased rapidly. The water glass coated on the polyurethane surface formed a glassy foam by foaming with water, which did not escape during the vitrification reaction when the foam or glass was heated. The glassy foam formed on the polyurethane foam became a fire-resistant insulation layer that inhibited the combustion of the polyurethane foam for more than 10 min. Water glass was found to improve the flame-retardant properties of the rigid polyurethane foam.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.117-123
• /
• 2018

The increase in energy efficiency has became a significantly important issue for building construction and maintenance. The energy efficiency is known to be achieved by using a material with lower thermal conductivity, and the best method is to increase the internal porosity of the material. Typical ways to increase internal porosity within cementitious composite are to use foaming agents or to use reactive powder such as aluminum. However, in this work, hydrogen peroxide was chosen as an alternative material to make lightweight cement mortar. The volume expansion of fresh cement mortar and unit weight, compressive strength and thermal conductivity of 28 day old cement mortar were measured. According to the experimental results, the incorporation of hydrogen peroxide increased internal porosity, and thereby reducing the compressive strength and thermal conductivities of cement mortar. It was found that hydrogen peroxide can be successfully used to produce lightweight mortar for thermal insulation purposes of buildings.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.115-120
• /
• 2004

A Gram (-), rod-shaped bacterium in size of 1.3∼$1.8{\times}0.35{\mu}m$ inhibiting the growth of cyanobacterium (Ana-baena cylindrica) was isolated and designated NG-2 in this manuscript. This isolate showed positive reactions for catalase and oxidase, and optimal growth conditions of 35∼TEX>$40<^{\circ}C$ and pH 9.0. In a mixed-culture of A. cylindrica and the isolate, each microorganism grew inverse-proportionally, and the cyanobacterial vegetative cells almost completely disappeared within 24 hours. NG-2 lysed A. cylindrica only under light, which means that lytic activity of NG-2 was dependent on the photosynthetic activity of host. When observed under phase contrast microscope, the isolate lysed vegetative cells of A. cylindrica in scattered state in a liquid medium, whereas het-erocysts have not been lysed. When cyanobacterial cell walls have been lysed partly, NG-2 attatched around A. cylindrica filament and formed colony, then encouraged complete lysis of cyanobacterial cells. The isolate showed similar lytic activity in natural water as in an artificial medium. And lytic activity of NG-2 was enhanced when attached on expandable polystyrene bead.