• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.760-767
• /
• 2005

The goal of this study was to find an application method of the waste soda-lime glass as the feed material for foamed glass by foaming of hydrated waste glass. The proper conditions for the foaming of hydrated waste glass were found to be: temperature of $92.5^{\circ}C$; reaction time of 10~20 min; particle size of -325 mesh as the unhydrated glass starting materials; and graphite weight to the hydrated glass ratio of 0.003 as the foaming agent. The resulting formed glass made from hydrated mixed waste glass under above mentioned conditions had the characteristics of density less than $0.2g/cm^3$ and thermal conductivity of $0.05kcal/mh^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.30-35
• /
• 2020

In this study, polyurethane-silica composite foams were synthesized to analyze thermal insulation characteristics and mechanical properties. In order to synthesize polyurethane-silica composite foams, polyester-silica composite polyols were first synthesized via a polymerization reaction with silica sol, dicarboxylic acid and glycol in monomer state. Physical properties of polyurethane-silica composite foams synthesized using the composite polyols were analyzed. From the thermal conductivity analysis, no significant differences among HPUF0, HPUF1, HPUF3 and HPUF5 were found. The compressive strength of polyurethane-silica composite foams increased as the silica content increased. The mechanical property of HPUF5 was also about 25% higher than that of HPUF0.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.402-406
• /
• 2006

New antibacterial Polyurethane foams for car seat with Urushiol extracted from a natural lacquer were prepared. Influences of antibacterial agent's concentration on the reactivity with isocyanate and the mechanical properties of foams were investigated. It was observed that the urethane formation reaction was delayed a little when the amount of Urushiol was increased. However, the foams made using Urushiol showed similar property to the neat polyurethane foam. In terms of antibacterial property, the foams prepared with Urushiol showed better performance than the neat polyurethane foam.

• Journal of Adhesion and Interface
• /
• v.17 no.1
• /
• pp.21-28
• /
• 2016

Foam-type biodegradable polyurethane adhesives were developed as a non-lethal weapon against illegal fishing boats. The adhesives were prepared from a hardener of polymeric methylene diphenyl diisocyanate (MDI) and a base composed of polyester and/or polyether polyols. In order to accelerate biodegradability, starch, dextrin, and amylase were added into the base, and which present about 34% degradability within 4 weeks confirmed by OECD 301C method. For proper mixing and corresponding prompt foam reaction, viscosities of hardener and base compositions were investigated in the temperature ranges from 0 to $50^{\circ}C$. For fast completion of the foam forming and corresponding adhesion, rising time was recorded in the same temperature range, and the rising time of the adhesive was varied within around 1 minute. T-peel adhesion tests with cotton fabrics were performed which showed 20.78 N/cm and 11.95 N/cm as the maximum and the average values, respectively.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.77-80
• /
• 1999

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2002

For the preparation of high resilience polyurethane (PU) foams with polyether type cell openers which have different ethylene oxide (EO) content, molecular weight and chain structure, the influences of tell opener structure on the kinetics, rheology, structural stability, open cell content and mechanical properties of the obtained foam were investigated. It was observed that urea formation reaction was delayed with the increase of EO content and incorporation of ester linkage in cell opener molecule and was relatively independent on the molecular weight. With the rheological studies, the decreases of viscosity and storage modulus were confirmed for the increase of EO content and molecular weight, so that the resulted foam had low structural stability and high open cell content. The cell opener having ester linkage in molecule exhibited the lowest values of viscosity and storage modulus and the obtained foam has high open cell content. However, the structural stability increased due to the larger intermolecular interaction of ester linkage. The hardness, tensile strength, tear strength and elongation of foam were deteriorated with increase of EO content and molecular weight of tell opener. On the other hand, the cell opener having ester linkage in molecule improved the values of tensile strength, tear strength and elongation.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.67-72
• /
• 2001

오랜 동안의 경험으로부터 조건설정이 표준화되어 있는 석유화학공업과는 달리 정밀화학공업에 있어서는 대상이 되는 공정의 반응조건 등을 제조자 스스로 결정해야 하는 경우가 많다. 또한, 취급하는 화학물질의 열분해 또는 반응위험성에 대한 위험성평가는 물론 물질안전자료(MSDS)도 확보되지 않은 상태에서 취급되는 경우가 많아 폭발ㆍ화재로 인한 중대재해의 잠재적 위험성이 매우 높은 상태이다.(중략)

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.335-338
• /
• 2008

2단발포에서 금형시간이 천연고무(NR) 스폰지의 팽윤에 미치는 효과를 검토하였다. Kneader와 Rollmill을 사용하여 NR컴파운드를 제조하고 높은 압력조건의 1차금형에서 부분가교시킨 후 대기압의 2차 금형에서 발포와 가교를 완성시켰다. NR스폰지의 겉보기밀도를 측정하고 주사전자현미경을 사용하여 셀구조를 관찰하였다. 얻어진 스폰지에 대하여 실온에서 톨루엔, 이소옥탄, 항공유에 의한 팽윤거동을 조사하였다. 1차금형시간이 증가하면 NR스폰지의 겉보기밀도가 증가하고 팽윤비가 감소하였다. 2차금형시간이 증가하면 NR스폰지의 겉보기밀도가 감소하고 팽윤비가 증가하였다. 용매의 접촉에 의한 NR 스폰지의 부피팽윤비를 높이기 위하여 금형에서 동시에 발생하는 발포제의 분해반응과 NR의 가교반응을 적절히 조절하는 것이 중요하다.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.190-199
• /
• 1997

단열용도의 폴리우레탄 미세포 포움의 가공에 대한 연구를 수행하였다. 미세포 구조 를 얻기 위해서는 핵생성율을 증진시키고 균일한 분포의 기포를 생성시켜야 한다. 이를 위 해 이산화탄소 기체를 풀리올과 이소시아네이트에 각각 과포화시키고 충돌혼합하여 초음파 가진을 적용하였다. 이산화탄소 기체가 수지 내부에서 기포 내부로 확산함에 따라 기포의 성장이 조절된다고 가정하고 금형이 충전되는 동안에 금형 내부에서의 기포성장기구를 이해 하기 위하여 수치적인 방법으로 이론적 연구를 수행하였다. 경화 시간과 확산 경계를 고려 하여 최종적인 기포의 크기를 계산하였으며 반응속도론을 고려하여 중합반응동안의 폴리우 레탄의 점도의 변화를 예측하고 경화 시간을 결정하였다. 실험적으로 결정된 기체 분자수를 기준으로 하여 이론적으로 확산경계를 예측하였다. 화학적 발포제인 물과 함께 물리적 발포 제인 이산화탄소를 각각 1,2,3기압의 포화압력으로 변화시키면서 폴리올과 이소시아네이트에 포화시켜 폴리우레탄 포움을 제작하고 제작된 포움의 밀도, 열전도도, 및 기포의 수와 지름 을 측정하였다. 측정된 결과로부터 이산화탄소의 포화압력과 초음파 가진이 포움의 기포핵 생성에 미치는 영향을 살펴보았다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.555-559
• /
• 2004

Ceramic foams were prepared by a self-blowing process of a polysiloxane with A1$_2$O$_3$ as a filler. The release of water and ethanol vapor during the condensation reaction of the polymer triggered the pores in the polymer melt. The size. interconnectivity and shape of the pores in the ceramic foams were strongly dependent on the viscosity of the polymer melt, which could be varied by the content and size oi the filler. When the content of the filler inceased and the size of the filler decreased. the size of the pores were decreased and the thickness between the pores were increased. In the addition, the viscosity of polymer melt increased by the pretreatment at 130$^{\circ}C$ for Ire intermolecular cross linking thereby stabilizing the foam structure. The density and compressive strength of the ceramic foams were affected by the heating rate during the blowing process.