• Title/Summary/Keyword: 발진기

Search Result 943, Processing Time 0.03 seconds

A study on design and implementation of oscillator with intermediate synchronized coupling in the X-Band (X-대역에서 중간동기결합 발진기의 설계 및 제작에 관한 연구)

  • Kim, Hee-Gon;Seo, Kyung-Hwan
    • KSCI Review
    • /
    • v.15 no.1
    • /
    • pp.11-16
    • /
    • 2007
  • 본 논문에서는 X-Band용 두 개의 발진기를 사용하여 중간결합을 통한 위상잡음 특성을 개선할 목적으로 중간동기결합 구조의 발진기를 제안하였다. 제안된 구조는 각각의 발진기는 Hai-Pin을 이용한 발진기로 설계를 하였으며, 두 발진기가 중간결합을 위해 갖는 위상차는 발진기들의 바이어스를 이용하여 조정을 한다. 제안된 구조의 수치계산을 통한 설계, 하드웨어 구현 및 실험을 통해 측정된 결과를 제시하였으며, 측정 결과로 위상잡음 특성이 약 100dBc/Hz 개선됨을 보였다.

  • PDF

Wide Tuning Range Varactor Diodeless LC-tank VCO (Miller 커패시터를 이용한 넓은 가변 범위의 LC-tank 전압 제어 발진기)

  • Ryu, J.Y.;Ryu, S.T.;Jung, S.H.;Cho, G.H.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07d
    • /
    • pp.2579-2581
    • /
    • 2001
  • 넓은 가변 범위를 가지는 LC 탱크 전압 제어 발진기에 관해 본 논문에서 소개하고자 한다. LC 탱크 전압 제어 발진기의 발진을 소멸시키는 밀러 증폭기의 ESR을 제거함으로써 넓은 가변 범위를 얻을 수 있다. LC 탱크 전압 제어 발진기는 발진기 코어와 버퍼, 밴드갭(bandgap) 기준 전압 발생기 그리고 드라이브 증폭기로 구성되어 있다. 발진기 코어는 1.3mA의 전류를 소모하고 약 1GHz의 가변 범위를 가진다. 출력주파수의 가변 범위내에 발진기의 출력 전력은 3dBm 이내로 변한다. 이러한 LC 탱크 전압 제어 발진기는 BiCMOS 공정을 이용하여 제작되었고 2.7V 단일 전원에서 31.5mW의 전력을 소모한다.

  • PDF

DEVELOPMENT OF WIDEBAND TUNABLE E-BAND(60-70 GHz) GUNN OSCILLATOR (광대역 특성을 갖는 E-band(60-70 GHz) Gunn 발진기 제작)

  • 김현주;한석태;김태성;김용기
    • Journal of Astronomy and Space Sciences
    • /
    • v.17 no.2
    • /
    • pp.221-232
    • /
    • 2000
  • A Gunn waveguide-oscillator, mechanically tunable from 60 to 70 GHz, has been developed for use as a local oscillator(LO) is millimeter radio telescope. Disc size, post size and characteristics of Gunn diode have an effect on the frequency tuning characteristics of Gunn oscillator. In this paper we report experimental results and design criteria for a wideband tunable Gunn oscillator. The developed Gunn oscillator has been used in the 100/150 GHz band dual channel receiver for the Taeduk Radio Astronomy Observatory.

  • PDF

Analysis of Tank Oscillation Voltages of Sub-1V Series Tuned Varactor-Incorporating Balanced Common-Gate and Common-Drain Colpitts-VCO (서브-1V 직렬공진 바렉터 통합형 평형 공통 게이트와 공통 드레인 콜피츠 전압제어 발진기의 탱크 발진전압에 대한 해석)

  • Jeon, Man-Young
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.7
    • /
    • pp.761-766
    • /
    • 2014
  • This study performs the analytical investigation of the oscillation voltages at the tanks of the series tuned varactor incorporating balanced common-drain, and common-gate Colpitts VCO which are able to work even at the sub-1V power supply voltages. The results the investigation predicts is verified by the simulation on the circuit behaviors of the two VCOs. The analytical investigation finds that the series tuned varactor incorporating balanced common-gate VCO generates greater oscillation voltage at the tank than the series tuned varactor incorporating balanced common-drain VCO does, which in turn is more suitable for generating the low phase noise oscillation signal from the sub-1V supply voltage than the series tuned varactor incorporating balanced common-drain VCO.

Analysis of Phase Noise Characteristics of Voltage-Control Microwave Oscillator (전압제어 마이크로파 발진기의 위상잡음 특성 분석)

  • 강진래;이승욱;김영진;이영철
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.10a
    • /
    • pp.242-245
    • /
    • 2001
  • 본 논문은 디지털 위성용 하향변환기에 적용되는 고안정 전압제어 마이크로파 발진기의 위상잡음 특성을 분석하였다. 전압제어 마이크로파 발진기는 능동소자의 비선형 등가모델과 궤환회로의 영향을 고려하여 유전체 공진 마이크로파 발진기를 위상잡음과 출력 전력에 절충(trade-off)하여 설계하였고, 13.25GHz의 발진주파수에서 출력이득은 12dBm이고, 위상잡음은 옵셋 주파수 100KHz 에서 -107.91dBc를 보였다. 바렉터 다이오드 동작에 의한 튜닝 범위는 2MHz/V로 위상동기 발진기에 응용할 수 있음을 보였다.

  • PDF

A Study on the Design of Microwave Oscillator Output Matching Circuit Using 3-dB Coupler Tuner (3-dB Coupler Tuner를 이용한 초고주파 발진기의 출력 정합회로 설계에 관한 연구)

  • 이석기;오재석;이영순;김병철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.9 no.2
    • /
    • pp.171-178
    • /
    • 1998
  • Generally, the output matching circuit has the most influence to the output power of oscillator and existing method for output matching has difficulty for making the optimum output matching circuit because the matching has to be done nearby the infinite impedance area of the Smith Chart. In this paper, it is studied for the output matching circuit of the microwave oscillator to get the maximum output power. The maximum output point can be found by adjusting the position of moving short in the Tuner while the oscillator is operating after connect the 3-dB coupler Tuner to the oscillator without output matching circuit. To design the oscillator for the maximum output power can be done easily with the microstrip line which is realized from the measured S-parameters of Tuner. In compare the oscillator by the existing method with another one by the suggested method in this paper, the first one has 6.45 dBm output power and second one has 9.71 dBm which is 3.26 dBm higher than the first one at the oscillation frequency 1.0338 GHz.

  • PDF

Research on Low Phase Noise Oscillator Using Microstrip Square Open Loop Resonator (Microstrip Square Open Loop Resonator를 이용한 저위상 잡음 발진기에 관한 연구)

  • Park Eun-Young;Seo Chulhun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.1 s.104
    • /
    • pp.17-23
    • /
    • 2006
  • This paper has presented a low phase noise oscillator using a square open loop with microstrip structure. A square open loop resonator has a large coupling coefficient value, which makes a high Q value, and has reduced phase noise. This oscillator has presented the oscillation frequency of 5.84 GHz, harmonics of -15.83 dBc and the phase noise of -111.17 dBc/Hz at the offset frequency of 100 kHz. In conclusion, the proposal structure has improved phase noise of 15 dB at the offset frequency of 100 kHz compared with the conventional structure of oscillator.

A Design and Construction of Phase-locked Dielectric Resonator Oscillator for VSAT (VSAT용 위상고정 유전체 공진 발진기의 설계 및 구현)

  • 류근관;이두한;홍의석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.10
    • /
    • pp.1973-1981
    • /
    • 1994
  • A PLDRO(Phase Locked Dielectric Resonator Oscillator) in Ku-band(10.95-11.70GHz) is designed with the concept of the feedback property of PLL(Phase Locked Loop). A series feedback type DRO is developed, and VCDRO(Voltage Controlled Dielectric Resonator Oscillator) using a varactor diode as a voltage-variable capacitor is implemented to tune oscillating frequency electrically. Then, PLDRO is designed by using a SPD(Sampling Phase Detector). This PLDRO is phase-locked voltage controlled DRO to reference source(VHF band) by SPD at 10.00 GHz for European FSS(Fixed Satellite Service). The PLDRO generates output power greater than 10dBm at 10.00 GHz and has phase noise of -80 dBc/Hz at 10 KHz offset from carrier. This PLDRO achieves much better frequency stability than conventional VCDRO.

  • PDF

A Technique to Induce Maximum Oscillating Voltage in BJT Clapp VCO's Resonator (BJT 클랩 전압제어 발진기의 공진기에서 최대 발진전압 도출기법)

  • Jeon Man-Young
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.1 s.343
    • /
    • pp.149-155
    • /
    • 2006
  • A technique used to induce maximum oscillating voltage in the BJT Clapp VCO is presented. The technique finds the optimal feedback capacitance values resulting in the largest oscillating signal swing across the resonator at a given bias state and the VCO's center frequency. By doing so, the presented technique attains the lowest phase noise which the BJT Clapp VCO can have. An analysis of the measurement results of the fabricated oscillators has verified that the VCO with the optimal feedback capacitance values actually exhibits the lowest phase noise.

Design of Engineering Model Oscillator with Low Phase Noise for Ka-band Satellite Transponder (위상잡음을 개선한 Ka-band 위성 중계기용 Engineering Model 발진기의 설계)

  • 류근관;이문규;염인복;이성팔
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2001.11a
    • /
    • pp.209-212
    • /
    • 2001
  • 본 논문에서는 Ka-band 위성 중계기용 국부 발진기에 사용하게 될 전압제어 발진기의 EM (Engineering Model)을 비선형 방법으로 설계하였다. 전압제어 발진기의 위상잡음을 개선하기 위하여 공진기로 사용되는 유전체 공진기와 결합하는 마이크로스트립 라인을 high impedance inverter로 구현함으로써 공진회로의 quality factor를 우수하게 유지하여 능동소자에 전달되도록 하였다. 개발된 전압제어 발진기는 0~12V의 제어전압으로 9.7965~9.8032GHz의 발진범위를 갖으며 공급전력은 8V, 17mA을 필요로 한다. 제작된 전압제어 발진기의 위상잡음은 -96.51dB/Hz @10KHz와 -116.5dBc/Hz @100KHz의 특성을 나타내며 출력전력은 7.33dBm을 얻었다.

  • PDF