• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.25-34
• /
• 2016

From 1990's, a study on the development of exothermic concrete, a concrete which electro-conductive material is mixed, has been proceeded. However, due to the difficulty of exothermic reproducibility of concrete specimen, the study has been unable to continuously carried out. Accordingly, this study was focused on developing an exothermic concrete for the purpose of snow-melting material. Cement paste and mortar specimens mixed with graphite, conductive metal powder and chemical admixture were made. The evaluation of exothermic performance and reproducibility was conducted under $-2^{\circ}C$ of low temperature. In addition, micro-chemical analysis was carried out to investigate a cause of exothermic reproducibility. As a test result, the specimen mixed with graphite and superplasticizer with air entrained showed the best exothermic performance and reproducibility. Through micro-chemical analysis, it is judged that polymer or methacrylic acid (MAA), the contents inside the superplasticizer with air entrained, gave exothermic reproducibility by generating the electrochemical reaction with graphite.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.131-132
• /
• 2014

In this study, an experiment was carried out using graphite, conductive nickel powder, copper bar, carbon fiber for evaluate the exothermic properties and heating reproducibility of the cement mortar containing conductive material. As a result, the conductive materials that interfere with heating reproducibility are present, and the optimal conductive materials exist in each input voltage.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2018

Purpose : This study aims to seek out the risk of low-temperature burns and fire. Method : Hot vests are connected by higher voltage than walking voltage. Results : Accordingly, the possibility of low-temperature burns and fire was proved high. It was also shown that hot vests with relatively lower resistance on heat rays reached a higher temperature as the same voltage was applied. Conclusion : There are some problems with hot vests because they do not have any safety devices like a thermostat or a timer to prevent temperature increasing rapidly. For the purpose of reducing the risk of low-temperature burns and fire, setting the standard of the minimum resistance temperature and regulating the use of heat rays with lower resistance are necessary.

• Bulletin of Food Technology
• /
• v.15 no.2
• /
• pp.107-111
• /
• 2002

초고압 가공처리는 별동의 화학 보존제를 사용하지 않고도 저온에서 식품유래 미생물을 사멸시킬 수 있기 때문에 식품분야에서 주목받는 새로운 가공기술이다. 이러한 초고압 처리의 장점 덕분에 관능적 특성이 우수하고 영양성분이 그대로 보존되는 고품질 식품의 제조도 가능하다. 고압 조건에서의 미생물 사멸정도를 측정하기 위해서는 흔히 실험실 규모의 장비(그림 1)을 사용하여 소량의 미생물 접종액을 처리함으로서 대량 처리시(그림 2)의 양상을 예측할 수 있다. 초기에 개발된 실험실 귬의 초고압 처리장비에는 일반적으로 고압용기 내부에 온도감지 장치가 부착되어 있지 않아, 압력 조건 하에서의 압축발열 및 순간 감압냉각 효과가 제대로 보고되지 않았다. 그러나 가열효과를 고려하지 않으면 초고압 처리기 특유의 가압 특성 대문에 실험 결과의 재현성을 얻기가 힘들고, 특히 대용량 생산설비의 경우 더욱 그러하다. 이론적으로 초고압 처리는 매우 예측 가능한 공정이다. 즉 고압요기 내부에서는 어느 지점이던 간에 압력이 고르게 분포되고, 가열 확산에 근거한 처리공정과는 달리 압력이 모든 지점에 순간적으로 공정상 불균일이 야기될 소지가 있는 부분은 오직 압축에 다른 발열과 열 전달에 의한 온도 편차에 기인한다. 실제로 처리 대상 제품과 압력 전달매체의 압축시 발열정도 차이와 시료, 매체, 고압용기 간의 열 손실 또는 열 흡수 대문에 고압처리 공정에서 온도가 일정하지 않을 수 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.29-34
• /
• 2024

The heating element utilizing the Joule heating generated when current flows through a conductor is widely researched and developed for various industrial applications such as moisture removal in automotive windshield, high-speed train windows, and solar panels. Recently, research utilizing heating elements with various nanostructures has been actively conducted to develop flexible heating elements capable of maintaining stable heating even under mechanical deformation conditions. In this study, flexible polyurethane possessing excellent flexibility was selected as the substrate, and silver (Ag) thin films with low electrical resistivity (1.6 μΩ-cm) were fabricated as the heating layer using magnetron sputtering. The 2D heating structure of the Ag thin films demonstrated excellent heating reproducibility, reaching 95% of the target temperature within 20 seconds. Furthermore, excellent heating characteristics were maintained even under mechanically deforming environments, exhibiting outstanding flexibility with less than a 3% increase in electrical resistance observed in repetitive bending tests (10,000 cycles, based on a curvature radius of 5 mm). This demonstrates that polyurethane/Ag planar heating structure bears promising potential as a flexible/wearable heating element for curved-shaped appliances and objects subjected to diverse stresses such as human body parts.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.88-94
• /
• 2011

Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in bookstore. In this report, burning behavior of typical combustible objects in bookstore are studied by measuring heat release rates of bookshelf with book. Based on the results, it has reviewed fire safety when a fire accident occurs on the large bookstore and suggested peak heat release rate per burning surface, fire growth rate, etc of the live fire load required for fire safety design in bookstore.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.367-374
• /
• 2002

Electrical characteristics of crystalline polymer composites filled with nano-sized carbon black particle were studied. The developed composite system exhibited a typical positive temperature coefficient resistance (PTCR) characteristic, where the electrical resistance sharply increased at a specific temperature. The PTCR effect was sometimes followed by a negative temperature coefficient resistance (NTCR) feature with temperature, which seemingly caused by the coagulation of nano-sized carbon black particles in the excessive quantity. The PTCR temperature was controlled by the carbon black content and the external voltage. The change of electric conductivity was shown as a function of carbon black content, and the resistance was constant when the carbon black content was over 20 wt%. The room-temperature resistance was maintained by a repeated heating and cooling. The excellent PTCR characteristic was demonstrated by the low resistance in the initial stage and the instantaneous heating capability.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2140-2141
• /
• 2011

본 논문에서는 생활공간에서 발생하는 모발건조기로 인한 전기화재의 화재 감정 기법에 관하여 알아보았다. 모발건조기의 전원장치, 제어장치, 발열장치, 송풍장치 등의 구조분석과 화재 재현 실험을 통한 각 요소의 화제 위험성 분석으로 모발건조기의 화재 현장 조사 및 감정 포인트에 대해 알아보았다. 그래서 모발건조기에서 발생하는 전기 화재의 정확한 조사 및 감정을 통해 앞으로 일어날 수 있는 전기화재를 예방하고자 한다.

• Fire Science and Engineering
• /
• v.25 no.5
• /
• pp.47-53
• /
• 2011

Fire load in buildings greatly contribute to the time and scale of fire according to the type and quantity of the fire load. Because bookstores have a large quantity of fire load compared with other buildings which may lead to large scale fires, however, their heat release characteristics have been hardly investigated. In this study, to obtain the data applicable for the performance-based fire safety design of bookstores, the specimens representing stacked fire loads were heated in a furnace in compliance with the standard heating curve of ISO834-1:1999 to investigate their heat release characteristics. From the experiment result, the combustion velocity and heat release rate required for performancebased fire safety designs are obtained.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1521-1522
• /
• 2015

선풍기는 모양과 용도에 따라서 탁상선풍기, 스탠드선풍기, 환기선풍기, 천장선풍기 등이 있으며, 최신식 선풍기에는 속도조절과 회전조절이 먼 거리에서도 가능한 리모컨식과 마이크로컴퓨터를 내장하여 자동적으로 바람의 속도를 조절하여 쾌적하게 잠이 들 수 있도록 프로그램이 갖추어진 것도 있다. 일반가정이나 사무실에서 흔히 사용되는 가전제품은 전기에 대한 비전문가가 사용하는 설비이기 때문에 관리소홀이나 취급상 부주의 등에 의해 화재가 종종 발생하는 실정이다. 특히 무더운 여름철이 지속되는 요즘 선풍기는 장시간 사용하는 제품으로 모터의 과열상태가 장시간 지속될 가능성이 높다. 본 연구에서는 선풍기에서 발생할 수 있는 화재위험성에 대하여 분석하고 정상조건에서 선풍기 자체 발열특성을 분석하는 실험과 모터가 과열될 수 있는 이상조건을 구현하여 가정용 회전기기에 발생할 수 전기화재 위험성을 고찰하였다.