• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.313-319
• /
• 2019

The A-KRS (Advanced Korean Reference Disposal System) is the disposal concept for pyroprocessed waste, which has been developed by the Korea Atomic Energy Research Institute. In this disposal concept, the amount of high-level radioactive waste is minimized using pyrochemical process, called pyroprocessing. The produced pyroprocessed waste is then solidified in the form of monazite ceramic. The final product of ceramic wastes will be disposed of in a deep geological repository. By the way, the decay heat is generated due to the radioactive decay of fission products and raises the temperature of buffer materials in the near field of radioactive waste repository. However, the buffer temperature must be kept below $100^{\circ}C$ according to the safety regulation. Usually, the temperature can be controlled by variation of the canister interdistance. However, KAERI has modelled thermal analysis under the boundary condition, where the waste canisters are in direct contact with each other. Therefore, a reliable temperature analysis in the disposal system may fail because of unknown thermal resistence values caused by the spatial gap between waste canisters. In the present work, we have performed thermal analyses considering the gap between heating elements and canisters at the beginning of canister loading into the radioactive waste repository. All thermal analyses were performed using the COMSOL software package.

• Pediatric Infection and Vaccine
• /
• v.30 no.1
• /
• pp.33-38
• /
• 2023

A case of persistent Ralstonia mannitolilytica bacteremia in the neonatal intensive care unit prompted source investigation due to its rarity. After an extensive investigation, a contaminated ultrasonic nebulizer was identified as the source, and the infection was controlled by removing the source. This study emphasizes the importance of further investigations, even in single cases of rare pathogens.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.455-466
• /
• 2020

In this study, we built a thermal model for SNIPE 6U nano-satellite which has scientific mission for measuring science data in near Earth space environment and described thermal design based on the thermal model. And the validity of the thermal design was verified through the on-orbit thermal analysis. The thermal design was carried out mainly on the passive thermal control techniques such as surface finishes, insulators, and thermal conductors in consideration of the characteristics of the nano-satellite. However, the components with narrow operating temperature range and directly exposed to the orbital thermal environments, such as a battery and thrusters, are accomodated with heaters to satisfy the temperature requirements. On-orbit thermal analysis conditions are based on the basic orbital conditions of the satellite, and thermal analysis was performed for Normal mode, Launch & Early Orbit Phase (LEOP), Safehold mode, and Maneuver mode which are classified by the power consumption and the attitude of the satellite according to the mission scenario. The analysis results for each mode confirmed that every component satisfies the temperature requirement. In addition, the heater capacity and duty cycle of the battery and thruster were calculated through the analysis results of the Safehold mode.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.623-630
• /
• 2007

Grouting materials are used for the unification of superstructural and substructural body like bridge seat (shoe) or machinery pedestal and e.t.c by filling their intercalary voids. Accordingly, grouting materials have been developed and used mainly with products of high strength because those materials are constructed specially in a part receiving large or impact load. In this situation, the structural body constructed by grouting materials with high stiffness-centered (caused by high strength) products is apt to cause brittle failure when receiving over a limit stress and to cause cracks according to cumulative fatigue by continuous and cyclic load. In addition, grouting materials are apt to cause cracks by using too much rapid hardening agents that give rise to high heat of hydration to maintain high strength at early age. In this study, to overcome these problems, cement type grouting materials including powder of waste tire and resin as elastic materials which aim to be more stable construction and to be improvement of mother-body's unification are developed and endowed with properties of high toughness and high durability add to existing properties of high flowability, non-shrinkage and high strength. Besides, this study contribute to of for green construction materials for being possible recycling industrial waste like waste tire and flyash. On the whole, seven type mixing conditions are tested and investigated to choose the best mixing condition.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.185-190
• /
• 2018

The dimer of bicyclo [2.2.1] hepta-2,5-diene (norbornadiene) can be used as a high-energy-density fuel. The purpose of this study is to investigate the effect of Co loading on the acid properties of HY zeolite catalyst and the catalytic activity in norbornadiene dimerization. When the cobalt was loaded on the HY zeolite catalyst, the amount of acid sites did not change, but the acid strength weakened. This can be attributed to the decrease in $Br{\ddot{o}}nsted$ acid site and the increase in Lewis acid site. The norbornadiene conversion and yield of norbornadiene dimer over the Co/HY catalyst showed higher than those over the HY zeolite catalyst. The higher activity of the Co/HY catalyst can be ascribed to the higher amount of Lewis acid sites over the Co/HY catalyst. Density and calorific values of the norbornadiene dimer prepared by using the Co/HY catalyst agreed well with the known values in the literature. It was confirmed that the norbornadiene dimer prepared in this study can be used as a high-energy-density fuel.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1183-1189
• /
• 2002

In order to develope the porous alumina ceramics with high strength, the pore characteristics and compressive strength were investigated in terms of relation to the conditions of spark-plasma sintering and the contents of graphite as a pore precursor. Porous alumina bodies were successfully prepared by spark-plasma sintering and burning out graphite in air. High porous bodies were fabricated by sintering at 1000${\circ}C$ for 3 min under a pressure of 30 MPa, heating rate of 80${\circ}C$/min and on-off pulse type of 12:2. For example, alumina bodies prepared by the addition of 10∼30 vol% graphite showed high porosity of 50∼57%. Also, the open porosity increased with graphite content. The relationship between pore characteristics and graphite contents could be explained by percolation model depending on cluster number and size. Porous alumina bodies prepared by the addition of 10∼30 vol% graphite showed the high compressive strength of 55∼200 MPa. This great improvement in strength was considered to be mainly due to the spark-plasma discharges and the self-heating action between particles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.50-50
• /
• 2022

한국농어촌공사 산하의 농업용저수지 중 3786개소에 대한 수질조사를 '19년도에 실시한 결과, TOC 기준 4등급 초과 저수지 비율은 약 20%로써, 도심 근교 저수지에서 녹조현상 빈발로 인해 수질, 악취, 미관 등의 환경문제 개선 민원이 다수 발생하고 있다. 현재 녹조 발생 사후관리를 위해 주로 사용되고 있는 대형 조류제거선은 저수심 수변부에서의 적용성에 한계가 있고, Al 기반의 응집제를 사용하여 조류를 수거해서 폐기하고 있는 실정이다. (주)이엔이티는 농어촌연구원, (주)코레드, (주)삼호인넷과 함께 호소나 정체하천의 수변지역에 적용될 수 있는 저에너지형 유해조류 포집시스템 개발과, 수거된 조류부산물을 무독화하여 농업재료로 재활용하는 방안을 연구하고 있다. 저수지나 정체수역의 녹조는 바람, 수면유동 등에 의해 수변에 집적되는 특성이 있어, 인공지능 기술로 녹조현상을 감시하여 조류 밀집구간에 접근할 수 있는 자율이동식 수상이동장치를 개발 중이다. 수상이동장치는 조류포집장치를 탑재하기 위한 부력체, 원격 운전이 가능한 무인항법장치, 수변식생대 및 저수심지역 이동을 고려한 수차방식 추진체, 전체 장치의 전원 공급을 위한 고성능 배터리 등으로 구성하여 상세 도면 설계를 진행하고 있다. 조류포집장치에는 표층에 주로 분포하는 남조류를 선택 흡입하는 포집 부표를 적용하였고, Al계 응집제 사용을 배제한 분리막 실험을 통해 침지형 막분리조 및 가압형 농축조를 설계하였다. 유해조류 포집 및 농축은 수상에서 이동체에 탑재하여 이뤄지고, 육상에서는 자원 회수가 가능하도록 회분식 응집공정으로 구분하였다. 조류 밀집지역에서 수거된 조류의 무독화 및 농업재료 자원화 타당성 평가를 위해 특용 버섯균주를 활용한 시료별 분석항목을 선정하고 실험 매트릭스에 따라 실증실험을 수행하였다. 수거조류를 전처리하여 성분 및 발열량을 분석하고 버섯재배 전후의 마이크로시스틴 독소(LR, RR, LR)를 포함한 성분 분석을 수행하여, 고체연료, 비료 및 사료로 활용방안을 검토하였다. 무인자율이동 조류포집장치는 실증화 규모로 제작하여 기선정된 테스트베드에서 현장적용성 평가를 수행할 예정이다. 본 연구를 통해 개발된 유해조류 포집 시스템은 기존의 녹조제거 방안을 보완하여 정체수역의 생태계 복원 및 친수공간의 환경개선 등에 적용되며, 무독화가 입증된 유해조류의 농업재료 자원화 기술은 고부가 상품 개발 및 환경폐기물 감축에 활용될 것이다.

• Clinical and Experimental Pediatrics
• /
• v.49 no.8
• /
• pp.875-881
• /
• 2006

Purpose : The aims of this study were to analyze the clinical characteristics of children with Kikuchi's disease(KD) at a medical center and to investigate the etiologic role of human herpesvirus 8(HHV 8) or Epstein-Barr virus(EBV) in children with KD. Methods : Twenty six children who were diagnosed as KD between Jan. 1998 and Dec. 2005 were included. Medical records were reviewed on the clinical characteristics of children with KD. Follow up data were collected by chart review and telephone contact. Polymerase chain reaction(PCR) was performed in order to detect HHV 8 DNA, and in situ hybridization(ISH) was perfomed in order to detect EBV RNA from 20 lymph node tissues. Results : There were 15 girls and 11 boys with a mean age of 13 years. Posterior cervical lymph nodes were involved in 72 percent(18/25) of the patients. Extracervical lymphadenopathy was associated in one patient. Fever was an associated symptom in 31 percent(8/26) of the patients. Leukopenia was observed in six (46 percent) patients. The cervical lymphadenopathy usually resolved spontaneously within 6 months. Only one patient had a recurrence of lymphadenopathy with fever during follow-up. No children with KD in our series developed systemic lupus erythematosus. HHV 8 DNA was not amplified by nested PCR in any of the cases, and all cases were negative for EBV RNA by ISH. Conclusion : KD should be differentiated as a cause of cervical lymphadenopathy in children. HHV 8 and EBV may not play major causative roles in KD in children.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.13 no.1
• /
• pp.30-35
• /
• 2010

Purpose: Infectious ileocecitis is an infection confined to the ileocecal area and one of the most common causes of pediatric abdominal pain. This study was performed to demonstrate the clinical features of infectious ileocecitis in children. Methods: The medical records and radiologic findings of 37 patients with ileocecitis diagnosed by ultrasonography and/or computed tomography, who were admitted to Pusan National University Hospital from January 2004 and July 2008, were reviewed retrospectively. Viral gastroenteritis and secondary ileocecitis were excluded. Results: The mean age of the patients was 4.8${\pm}$3.4 years. One-half of the patients were preschool children. The chief complaint was abdominal pain (75.7%), diarrhea (10.8%), and vomiting (8.1%). Accompanying symptoms were fever (56.8%), vomiting (21.6%), and diarrhea (16.2%). The mean duration of abdominal pain, fever, diarrhea, and vomiting was 3.8${\pm}$2.1, 3.0${\pm}$1.9, 3.4${\pm}$1.9, and 2.4${\pm}$2.3 days, respectively. The frequency of diarrhea and vomiting was 5.8${\pm}$2.2 and 4.0${\pm}$2.8 per day, respectively. Diagnosis was made by abdominal ultrasonography in 22 patients (59.5%), abdominal CT in 2 patients (5.4%), and both modalities in 13 patients (35.1%). Besides the radiologic finding of thickening of the bowel wall, mesenteric lymphadenitis (59.5%), ascites (5.4%), and both mesenteric lymphadenitis and ascites (16.2%) were revealed. The mean duration of illness was 7.5${\pm}$5.0 days. There were no specific laboratory findings, and culture studies with stool or blood were negative. All of the patients recovered completely without specific treatment. Conclusion: Infectious ileocecitis has acute appendicitis-mimicking symptoms, but is self-limited within a few days, thus unnecessary treatment and work-up is avoided. However, distinguishing infectious ileocecitis from appendicitis, inflammatory bowel disease, and mesenteric lymphadenitis is important.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.67-73
• /
• 2011

In this study, it was investigated compressive strength generation of concrete using high volume mineral admixture obtaining fundamental data for the application of concrete structure in construction field. For this, it was evaluated compressive strength with unit binder contents($310{\sim}410kg/m^3$), replacement ratio of mineral admixture(70~90%), unit water contents($140{\sim}150kg/m^3$) and curing temperature in the normal strength range. Also, after producing mock-up structure, hydration heat and compressive strength generation was evaluated to examine properties in the concrete member. In case of concrete using a large amount of industrial byproducts which was reviewed in this study, it is possible to secure compressive strength more than 24MPa at age 28days with about $13^{\circ}C$ ambient temperature of curing condition and that is considered to be applied to structure at construction site.