• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2759-2764
• /
• 2014

Smoke detector is commonly used to reduce fire detection time. However, technical problems regarding its inaccuracy of laser beam-receiving point on the surface of the sensor associated with incoming interference are identified when the laser transmitter and receiver are installed at a distance of about 100m. In this paper, we propose the auto focus alignment algorithm with high precision to adjust tilting angle of lasers caused by environmental interference so that solve existing issues using multi-level worm gear set.

• Journal of Veterinary Clinics
• /
• v.26 no.4
• /
• pp.395-399
• /
• 2009

Radiotelemetry device was surgically implanted in the abdomen of a Eurasian river otter (Lutra lutra). Behaviors of the otter, hospitalized after surgical implantation were also observed. The surgical techniques involved an incision in the paralumbar fossa to introduce a radiotelemetry device into the abdominal cavity. Thirteen behaviors of the otter during hospitalization following abdominal surgery were observed and the time budget of each behavior and the times at which each behavior seems to appear most frequently were measured. This report could provide surgical techniques involving intra-abdominal implantation in otter and basic information associated with otter's behaviors during hospitalization.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.117-123
• /
• 2002

자동화재탐지설비는 수신기, 감지기, 중계기, 발신기, 음향장치, 배선, 전원 등으로 구성되어 있는 것으로, 화재 발생시 생성되는 물리적, 화학적 현상을 자동으로 감지하여 음향장치를 작동함으로써 화재를 조기에 발견하여 초기소화를 가능하게 하고 관계자 또는 거주자가 신속히 피난할 수 있도록 하는 설비이다.(중략)

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.47-50
• /
• 2003

초음파 발신기(핑거)에 의해 원격으로 해양생물을 추적하는 방법(이하 바이오텔레메터리 라고 한다)은 해양생물에 핑거를 부착하여, 핑거가 발사하는 음을 표적으로 해양생물의 행동생태를 파악하는 중요한 수단이다. 바이오텔레메터리의 최대 장점은 대상생물의 순간적인 행동생태와 서식환경을 동시에 상세하게 조사할 수 있다는 것으로, 이것은 다른 방법으로는 실현하기가 어렵다. (중략)

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.138-144
• /
• 2002

The silicon piezoresistive pressure sensor is made by semiconductor process to obtain stainless steel isolated type pressure sensor. The sensor is loaded on a stainless steel housing with glass molding, $50\;{\mu}m$ stainless steel thin film is welded, and the stainless steel housing encapsulated by silicone oil. The performance of fabricated the pressure sensor has 10 bar pressure range. The XTR105 of exclusive transmitter chip is used the pressure transmitter that output current is 4 - 20 mA. The accuracy is ${\pm}5%$ FS, however, the accuracy is ${\pm}1%$ FS when the sensor is compensated temperature.

• 전자공학회논문지 IE
• /
• v.48 no.3
• /
• pp.10-15
• /
• 2011

In the case of designing an acoustic transducer for high power application, we usually aim to transfer the source electric energy to the output acoustic energy as large as possible. For this purpose, we should match the impedance of the power amplifier to the impedance combined with the acoustic transducer impedance and the radiation impedance. Especially if we have electrical source with almost zero impedance, we need improve the power factor of the acoustic transducer in the load. In this paper, we propose a broad band impedance matching method by the improvement of power factor, which applies ABCD matrix.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.499-500
• /
• 2014

화재발생 시 인명 안전을 위하여 초기의 화재감지가 매우 중요한 요인이다. 특히 도로터널, 지하철역사 등 광범위 폐쇄공간에서 연기에 의한 질식사 등 2차 피해의 발생위험이 높다. 이에 최근 광범위 공간에서 적외선 레이저를 활용한 원거리 연기검출 화재탐지기에 대한 연구가 진행되고 있다. 이러한 레이저 기반 원거리 연기검출장치는 이격(100m 이상) 설치되는 레이저 발신기와 수신기의 레이저 포인트가 정확히 정합되어야 한다. 아울러, 레이저 발신기와 수신기 사이의 거리에 비례하여 레이저 초점의 이동거리가 매우 민감하게 변화하므로 이를 정확히 정합하기 위한 고정밀 제어장치가 필요하다. 따라서 본 논문에서는 복수개의 레이저 발신모듈과 복수개의 조도센서(CdS)를 통해 초점의 정합을 자동 추적할 수 있는 알고리즘을 설계, 구현하였다. 이는 초기 레이저 초점의 설정과 이후 외부환경에 따른 초점의 틀어짐을 자동 보정하여 다양한 레이저 인식 장치에 적용될 것으로 사료된다.

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.58-66
• /
• 2009

The telemetry of eight adult manchurian trouts (Brachymystax lenok tsinlingensis) in the upper part of the Nakdong River, which is the southern limit of distribution of manchurian trout on the Korean peninsula, was used to examine migration patterns and evaluate characteristics of over-wintering and the spawning season between December, 2007 and May, 2008. Based on the tracking data, the tagged fish showed a limited migration between adjacent pools, moving only up to $8.6m\;day^{-1}$ during the winter season (December to February). Hydraulic conditions of over-wintering pool areas were, ca. 1m depth, slow moving surface water with areas of sand and gravel. The migration of tagged individuals was successful, moving up to $96.2m\;day^{-1}$ during the spawning season. Two tagged individuals (BL4, BL6) exhibited upstream migration, whereas others showed downstream movements. The timing of upstream migration of the two individuals was consistent with an increasing phases of water level and discharge. The fishes migrating toward the down stream moved to the wide pool areas downstream, where they spent the summer season for the growth.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1279-1282
• /
• 2006

긴급구조정보시스템의 하위시스템으로 운용되고 있는 무선페이징 시스템은 제품의 신뢰성 부족과 단말기 및 휴대용 발신기와 접수단말기의 문제점, 수혜자의 거부감과 사용법 미숙, 관리자의 형식적 관리점검으로 인하여 효율성이 떨어지고 있어 시스템의 진화가 필요하다. 따라서 본 연구에서는 현재의 무선페이징 시스템의 문제점을 개선한 새로운 무선페이징 시스템인 SAFE119 시스템을 구현한 후 구현성과를 평가하고자 한다.

• Fire Protection Technology
• /
• s.13
• /
• pp.12-17
• /
• 1992

This report is announced about test results of manually actuated signaling boxes(manual call points) and audible signal appliances (alarm bell), so as to occupants, inhabitants or persons di-rectly concerned with the implementation and direction of emergency action initialation is the area protected. The testing plan was progressed devided by three testing items, external appearance inspec-tion, performance test and environment proof test. The purpose of this report is to analyze the characteristics of products.