• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.375-382
• /
• 2010

Twelve pigs were used to investigate the effects of polyclonal antibody candidate against abdominal (AAb) and subcutaneous adipocyte membrane proteins (SAb) on body weight, fecaldigestibility and blood metabolites. When AAb and SAb developed by Choi et al. (2010) were injected to pigs, the numerical increase in BW (body weight) occurred at 4 weeks post-treatment, but BW for an entire period was also increased, indicating that the BW increase may not be affected by the antibodies injection. Antibodies treatment did not affect (P>0.05) fecal digestibility of dry matter, crude protein, crude fat and crude fiber. Fecal digestibility of crude ash for control (no treatment) at 2 weeks decreased, and that for non-immunized serum treatmentgroup at 4 weeks post-treatment increased, respectively (P<0.05). However, fecal digestibility of crude ash for AAb and SAb groups did not significantly change. At 4 weeks after the antibodies treatment, blood urea N concentration for AAb and SAb groups was significantly increased (P<0.05). However, these increases may not be caused by the antibodies treatment because similar pattern in blood urea N concentration occurred before the antibodies treatment. Antibodies treatment did not affect concentration of plasma glucose and triglycerides (P<0.05). Compared with control, concentration of plasma total cholesterol for AAb and SAb groups at 4 weeks post-treatment was significantly (P<0.05) decreased. This may suggest that body fat reduction possibly occurs. In conclusion, the AAb and the SAb developed by Choi et al. (2010) may have safety in nutritional physiological metabolism in pigs. Further study on in vivo fat reduction of the antibodies against abdominal and subcutaneous adipocytes of pigs should be required for fat-reduced pork production.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2018

This study investigated the influence of starch extraction (ST-EX) solutions on the extraction yield and characteristics of Chinese yam (CY) starches from domestic Dioscorea batatas. Ascorbic acid (VitC), $Na_2S_2O_3$, $NaHCO_3$, and $Na_2CO_3$ were used as ST-EX solutions (0.4%, w/v). The extracted CY starches were examined for ST-EX yield, chemical composition, size distribution, X-ray diffraction, solubility, swelling power, gelatinization, and pasting viscosity. The highest ST-EX yield was obtained from $NaHCO_3$, followed by VitC. Lower protein content, relative crystallinity, and gelatinization enthalpy were found in CY starches from alkaline ST-EX solutions ($NaHCO_3$ and $Na_2CO_3$). Size distribution and gelatinization temperature did not generally differ for CY starches from the different ST-EX solutions. Pasting viscosities increased in the order from $Na_2CO_3$ > $Na_2S_2O_3$ > $NaHCO_3$ > VitC ST-EX solutions. Thus, VitC may be most appropriate to extract CY starch from Dioscorea rhizomes, considering its ST-EX yield, total starch content, and variation in pasting viscosity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.16-25
• /
• 2012

To calculate the total mass flux that change in dry and flood season in the Yeomha Channel of Gyeonggi Bay, the 13 hour bottom tracking observation was performed from the southern extremity. The value of the total mass flux(Lagrange flux) was calculated as the sum of the Eulerian flux value and stroke drift value and the tidal residual flow was harmonically analyzed through the least-squares method. Moreover, the average during the tidal cycle is essential to calculate the mass flux and the tidal residual flow and there is the need to equate the grid of repeatedly observed data. Nevertheless, due to the great differences in the studied region, the number of vertical grid tends to change according to time and since the horizontal grid differs according to the transport speed of the ship as a characteristic of the bottom tracking observation, differences occur in the horizontal and vertical grid for each hour. Hence, the present study has vertically and horizontally normalized(sigma coordinate) to equate the grid per each hour. When compared to the z-level coordinate system, the Sigma coordinate system was evaluated to have no irrationalities in data analysis with 5% of error. As a result of the analysis, the tidal residual flow displayed the flow pattern of sagging in the both ends in the main waterway direction of dry season. During flood season, it was confirmed that the tidal residual flow was vertical 2-layer flow. As a result of the total mass flux, the ebb properties of 359 cm/s and 261 cm/s were observed during dry and flood season, respectively. The total mass flux was moving the intertidal region between Youngjong-do and Ganghwa-do.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.402-419
• /
• 1994

Telecommunication and intormation technology have been conceived as crucial as well as revolutionary elements for recent and future social and economic development, and their development have led to a spatial reorganization and locational change of economic activities. Information technology has resulted in important changes in the organization structure and location of firm. This study draws attention to the understanding of the relationship between the diffusion of information technology and changes in firm activities with the special reference to the service industry of the United States. Information technology has had a significant impact on the growth and changes of the service industry of the United States through changes in the organizational and employment structure, market structure, and locational changes. The impact of information technology on location changes of the service industry shows two opposite patterns, concentration and decentralization. Among these patterns, the location change in the service industry of the United States reveals predominantly the decentralization tendency such as suburbanization and transfer to lower ranking cities rather than concentration. In case of Korea, however, it is anticipated that the rapid development of information technology may lead to the concentration of the service industry in Seoul and Capital region.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.137-142
• /
• 2013

Oral Medicine includes temporomandibular disorder, orofacial pains such as neuropathic pain, soft tissue diseases, halitosis, laser treatment, snoring, sleep apnea and identification through forensic dentistry etc. Such diseases are relatively common and cause great inconvenience and pain to the patients, as well as incur fatal health scare at times. In terms of oral medicine, the number of orofacial patients is growing due to a change in the life style and an increased stress as time goes in contemporary society and the demand of areas requiring oral medical professionalism, such as soft tissue lesions, snoring and sleep apnea, forensic dentistry evaluation and others are rapidly ascending. Consequently, among the areas in dental science, the calls for the expertism in oral medicine and its role are mounting. Analyzing the distribution according to disease entity, symptoms, duration of disease, and the prehistory courses of new patients visiting the department of oral medicine in a year provides information of the role and the relative importance of oral medicine in prospect and enables effective diagnosis and treatments for the patients. Therefore, in the present study, by analyzing new patients visiting the oral medicine clinic in our dental hospital for a year and by evaluating the role and the professionalism in future oral medicine, the authors concluded the followings: 1. It was founded that new patients to oral medicine mainly had temporomandibular disorders, soft tissue diseases, and neuropathic pains. 2. The number of patients with temporomandibular disorder appeared to be the highest percentage and the order within this was the patients with combined disorders, muscle disorder, and internal derangement of joint disc. 3. The number of patients with xerostomia appeared to be the highest percentage within soft tissue disease, followed by lichen planus and recurrent apthous ulcers. 4. The number of patients with burning mouth syndrome appeared to be the highest percentage within neuropathic pain.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.105-111
• /
• 1997

Root dynamics of a pine stand at Hongcheon, Korea was assayed with two kinds of soil samplers which had been tentatively manufactured to renovate the routine soil sampler, Oakfield soil sampler. Root-mixed soil samples were collected on December of 1995, March, May, August and December of 1996 within each randomly selected 8 plots. The amount of roots collected by the two kinds of soil samplers were not significantly different at the 5% level, which indicated that the renovated sampler was more desirable to be used since the sampler showed efficiencies in time for collection and quantification than the routine sampler. The quantities of total root in 100g soils were 469mg on December of 1995, and 352mg, 473mg, 461mg, 522mg on the following March, May, August and December, respectively. That is, total amount of roots showed the smallest in Spring and reached maximum in early Winter, although the differences were not significant among each season. By the way, the alive roots and dead roots showed significant differences among season, the alive roots took about 90% from May to early December while they decreased down to some 65% from late December to March. The roots of Pinus densiflora S. et Z. took about 46% of total roots although the species comprised 70% of crown layer, and the ratio of fine-roots of the species were higher than that of other species. By the way, the dynamics of total roots and that of alive roots were quite different. Thus, the study for root dynamics such as fine roots which take a major role for mycorrhizae formation or nutrient uptake should not be inferred from the data of total root dynamics but be investigated in detail by dividing them into each class.

• Korean journal of applied entomology
• /
• v.53 no.3
• /
• pp.247-260
• /
• 2014

To identify the species of Trichogramma occurring in the corn fields of Korea as egg parasitoids of Ostrinia furnacalis, we sequenced the full-length of ITS2 nuclear rDNA from 112 parasitoids collected during this study. As a reference to distinguish species, we also retrieved full-length ITS2 sequences of 60 Trichogramma species from the NCBI GenBank database. On the basis of the size and 3'terminal sequence pattern of the ITS2 sequences, the Trichogramma samples collected in this study were divided into three groups (K-1, -2, and -3). Evolutionary distances (d) within and between groups based on ITS2 sequences were estimated to be ${\leq}0.005$ and ${\geq}0.080$, respectively. In the net average distance between groups or species, the d value between K-1 and T. ostriniae, K-2 and T. dendrolimi, and K-3 and T. confusum was the lowest, with values of 0.016, 0.001, and 0.002, respectively. In the phylogenetic tree, K-1 and K-2 were clustered with T. ostriniae and T. dendrolimi, respectively. However, K-3 was clustered with three different species, namely, T. confusum, T. chilonis, and T. bilingensis. NCBI BLAST results revealed that parasitoids belonging to K-1 and K-2 showed 99% identity with T. ostriniae and T. dendrolimi, respectively. Parasitoids in K-3 collected from Hongcheon showed 99-100% identity with T. confusum and T. chilonis, and one parasitoid in K-3 collected from Gochang had 98% identity with T. bilingensis, T. confusum, and T. chilonis. On the basis of these results, we infer that the species of Trichogramma collected in this study are closely related to T. ostriniae (K-1) and T. dendrolimi (K-2). However, it was not possible to distinguish species of K-3 using the ITS2 sequence alone.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2002

The study was carried out to determine the growth and biomass production of major deciduous trees including Betula platyphylla var. japonica, Betula schmidtii, Zelkova serrata, Acer mono, Prunes sargentii, and Ligustrum obtusifolium subjected to artificial shade treatment in nursery field. The six deciduous trees seedlings grow for 2 years under different light intensity of 100%, 38-62%, 22-28%, 7-20%, and 2-6% of the full sun light intensity. The results were as follows; In the seedling heights and root collar diameters of shade intolerant species like Betula platyphylla var. japonica and Betula schmidtii, the relative growth rates of seedlings grown in full sun showed 2 times as compared with those subjected to the shade treatment of 2-6% light intensities of full sun. In the shade tolerant species like Acer mono ant Ligustrum obtusifolium, the growth performances were better in the seedlings grown in 38-62% light intensities of full sun. Total dry mass including the dry mass of leaves, shoot and root were as a whole decreased with shade treatment. The ratio of the dry mass of leaves and stem increased the dry mass of root. T/R ratio of the seedlings increased by decreasing the relative light intensity. And the T/R ratio of 2-6% light intensities of full sun was ranged from 1.1~5.0 were greater in the full sun light was ranged from 0.6~3.2. Light intensity by artificial shade treatment decreased in deciduous trees when compared on the whole, it showed tendency that SLA increases, increased that seeing resemblant tendency in LAR and LWR and changed of light intensity is strong, it increased that showed difference as statistical. But, LWR of Betula platyphylla var. japonica increased gradually and showed tendency that decreases rapidly in the shade treatment of 2-6% light intensities of full sun. This result is thought that biomass production decreased by shading treatment influenced in physiological characteristics such as leaf area and decrease of the leaf amount.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.88-89
• /
• 2010

최근 인간의 활동범위와 영역이 확대되고 산업이 발전하면서 인간의 삶과 지속가능한 발전 등 도시 기후에 관한 관심도 높아지고 있다. 산업혁명 이후 도시화와 산업화로 인해 인구가 증가하고 도시지역으로 집중됨으로써 도시 열섬화 현상에 대한 도시환경문제가 부각되고 있다. 이는 최근까지도 도시개발에 있어서 기능과 효율성이 우선시 되어 도시기후에 대한 배려가 이루어지지 못하고 있으며, 오히려 과도한 냉난방을 가동하는 등 쾌적한 실내 환경 조성을 위한 노력만을 행해왔다. 도시화에 따른 도시의 열환경 구조의 변화는 토지이용의 변화에 따른 피복상태와 밀접한 관련이 있다는 연구들이 수행된 바 있다. 이렇듯 도시화가 진행됨에 따라서 도심 지표면을 덮고 있는 포장재도 변하고 있다. 대표적인 토지피복재로는 콘크리트와 아스팔트 등의 인공포장재, 수계, 삼림 등으로 크게 나누어 볼 수 있다. 최근 도심의 발달로 인해 도심의 표면은 점차 인공포장재인 아스팔트와 콘크리트로 덮여지고 있다. 인공포장재는 맑은 여름철 낮에 받아들인 열을 야간에도 머금고 있어 도시열섬현상의 주요원인이 된다. 도시화가 진행됨에 따라 토지이용형태가 변화하고 있으며 이러한 토지피복의 변화는 그 지역의 기온과 풍향, 풍속뿐만 아니라 지표온도도 변화시키므로 도시 열환경 구조에 적지 않은 영향을 미치고 있다. 과거에는 자연 환경과 도시공간에 대한 인식이 다른 분야로 나누어져서 다루었지만 현재 위성영상 기술의 발달로 많은 공간 정보를 파악할 수 있게 된 바 도시기후변화에 더욱 직접적이고 근본적인 접근이 쉬워졌다. 원격탐사기법의 활용은 위성자료를 이용하여 동시간대 평면적인 열구조를 정량적으로 파악하는데에 중요한 자료를 제공하여 도시지역을 덮고 있는 인공자재의 존재가 도시열섬의 형성과 밀접하게 연관이 있다는 사실을 짐작할 수 있다. 따라서 도시기후변화의 문제점을 더욱 적극적으로 해결하기 위해서는 토지이용에 따른 지표면 온도 상승의 현황을 파악하고 이를 저감 시킬 수 있는 대책들이 수립되어야 한다. 본 연구는 보다 세분화된 도시 열환경을 정량적으로 분석 평가하기 위해서 토지피복별 분류를 3가지로 대구시 중구 경북대학교 부속 고등학교(이하 사대부고 지점)를 도심지역으로, 경상남도 창녕군 창녕읍 우포늪(이하 우포지점)을 수계지점으로, 경상북도 안동시 길안면 만음리(이하 안동지점) 지점과 대구시 칠곡군 동명면 득명리 팔공산 한티재 도립공원(이하 팔공지점)을 산림으로 분류하여 연구하였다. 대구 계명대학교 기후환경연구실에서 보유하고 있는 AWS(Automatic Weather Station) 자료로 기상요소를 분석하였으며, MODIS Terra 위성영상을 이용하여 지표온도를 추출하고 분석하였다. 또 기상요소와 지표온도를 이용해 회귀식을 도출하여 추정기온을 산출하였다. 그 결과 첫째, 계절에 따른 기온의 시간변화는 여름의 평균기온이 $25.13^{\circ}C$와 $24.12^{\circ}C$로 사대지점과 우포지점의 평균기온이 가장 높게 나타났으며, 이는 도심에서 발생되는 인공열의 영향으로, 우포지점은 수계의 특징이 반영된 결과라 할 수 있다. 둘째, 계절에 따른 풍속의 시간변화는 여름의 경우 우포지점의 풍속이 1.63m/s로 가장 높은 반면 안동지점의 풍속이 0.27m/s로 가장 낮은 것으로 나타났다. 겨울의 경우 팔공지점의 풍속이 1.82m/s로 가장 높게 나타났다. 토지피복에 따른 지표면의 변화가 도시기후에 미치는 영향을 정량적으로 평가하고, 또 지표면 온도와 기온과의 차이를 알아보기 위하여 MODIS 위성 영상을 이용하여 세 지점을 대상으로 토지피복에 따른 열환경을 평가 분석하여 다음과 같은 결론을 얻을 수 있었다. 첫째, MODIS 위성영상을 이용하여 산출한 지표면 온도는 여름철 주간에 안동지점의 경우 주변지역에 비해 지표면 온도가 약 $26^{\circ}C$로 낮게 나타났으며 우포지점의 경우 수계가 가지는 열 완충능력으로 약 $27^{\circ}C$의 낮은 지표면 온도를 나타내었다. 사대지점의 경우 약 $34^{\circ}C$이상의 높은 지표면 온도를 나타내었다. 둘째, MODIS 위성영상을 이용하여 산출한 지표면 온도와 관측된 기온과의 회귀식을 도출하여 상관분석 한 결과, 모든 지점의 값에서 상관성 및 신뢰도가 높은 것으로 나타났다. 셋째, 상관분석의 결과를 통하여 추정한 기온은 지표면 온도와의 차이가 있지만 유사한 패턴의 결과로 추출되었다. 이러한 결과로 볼 때 도시의 인공자재를 이용한 건축과 개발이 도시열섬현상을 유발하는데 중요한 역할을 하는 것을 정량적으로 평가할 수 있었다. 따라서 본 논문의 연구결과를 바탕으로 도시계획에 있어서 인공구조물에 의한 기온과 풍속이 받는 영향을 고려하여 도심의 인공구조물의 배치나 자재에 대한 개발이 이루어져야 할 것이며 열교환의 방해 및 바람순환이 확보되는 구조로 개선되어야 할 것이다.