• Title/Summary/Keyword: 발생원리

Search Result 956, Processing Time 0.026 seconds

A Study on Control and Compensating Characteristics of Active Series Voltage Compensator with Harmonic Current Compensating Capability (고조파전류 보상 기능을 갖는 능동 직렬 전압보상기의 제어 및 보상특성에 관한 연구)

  • 이승요;김홍성;최규하;신우석;김홍근
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.5 no.5
    • /
    • pp.484-492
    • /
    • 2000
  • In this paper, a voltage compensator with harmonic current compensating capability is studied and its compensating characteristics are analyzed. Like the hybrid active power filter, the proposed system is composed of parallel LC passive filter and series PWM converter connected to power line through series transformer. It is shown that the compensation of harmonic current generated due to nonlinear loads such as diode rectifier and instantaneous voltage compensation of the source are performed through the proposed compensating system. The operating principle of the proposed system is described through a single-phase equivalent circuit and the control strategy is suggested on the d-q rotating reference frame of the 3-phase system. Also, experiment is carried out to verify compensating characteristics of the proposed system.

  • PDF

Capacitive Voltage Divider for a Pulsed High-Voltage Measurement (펄스형 고전압 측정용 용량성 전압 분배기)

  • Jang, S.D.;Oh, J.S.;Son, Y.G.;Cho, M.H.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1612-1615
    • /
    • 2001
  • 포항 방사광 가속기 2.5 GeV의 전자선형 가속기는 마이크로웨이브 발생원으로써 80 MW 클라이스트론(klystron) 11대와 입사부에 65 MW 클라이스 트론 1대를 사용한다. 전자빔 에너지의 효율적인 제어를 위하여 고출력 클라이스트론의 RF 전력과 입력 빔의 전력을 정확하게 측정해야 하며 응답특성이 양호한 측정장치와 정밀한 측정이 요구된다. 클라이스트론에 공급되는 전력은 캐소드에 인가되는 전압과 전류의 측정치로 계산된다. 비록 빔 전압측정에서의 작은 오차일지라도 클라이스트론 RF 출력 전력의 결과값에 큰 영향을 미친다. 따라서, 빔 전압의 측정시에 정확한 측정을 위하여 특별한 주의가 요구된다. 고전압 펄스전원장치 인 모듈레이터 (modulator)에서 발생되는 수백 kV(350-400 kV)의 전압을 측정하기 위하여 커패시터의 용량비로 입력전압을 분압하는 용량성 분압기(capacitive voltage divider, CVD)가 사용된다. 고압측 분압용 표준 콘덴서의 정전용량을 결정하는 주요인자는 고전압 절연유의 유전율(dielectric constant)이다. 그러므로, 측정범위 내의 전압, 주파수, 온도에 대하여 정전용량의 변화율이 작도록 설계하여야 한다. 본 논문에서는 펄스형 고전압 신호 측정을 위한 용량성 전압 분배기의 측정원리, 설계분석, 교정시험, 절연유의 온도변화에 따른 정전용량 변화 특성에 대한 실험 결과를 고찰하고자 한다.

  • PDF

발생론적 인식론을 적용한 수학교실 - C. Kamii의 '두 자리 수 더하기 두 자리 수' 수업을 중심으로 -

  • Kim, Jin-Ho
    • Communications of Mathematical Education
    • /
    • v.18 no.2 s.19
    • /
    • pp.371-382
    • /
    • 2004
  • Kamii는 피아제의 발생론적 인식론이란 이론을 모태로 수학을 지도해야 학습자가 수학을 이해를 바탕으로 학습할 수 있다는 믿음을 지니고 있다. 본고에서는 Kamii가 이런 신념을 갖고 실시한 수업을 녹화한 비디오 자료에 나타나는 특징을 분석하였다. 첫 번째 특징은, 교사가 가르쳐야 할 지식을 직접적으로 지도하지 않는 대신에 학습자가 스스로 지식을 구성할 수 있도록 매개자의 역할을 한다는 점이다. 두번째, 기저지식으로서 학습자의 비형식적 지식을 학습자가 적극적으로 활용할 수 있도록 허용하는 분위기이다. 세 번째, 두 번째와 관련되어서 학습자의 사고과정은 성인이나 학문적 체계에서 운용되고 있는 사고 흐름과는 다르다는 것을 인정해 준다. 네 번째, 교사의 역할이 가르쳐야 할 지식을 가르치는데(전수하는데) 있는 것이 아니라 학습자들이 생성해 낸 여물지 않은 아이디어들을 익힐 수 있도록 환경을 조성하는데 있다. 다섯 번째, 학습자마다 기저지식이 다르기 때문에 동일한 학습주제라 할지라도 이해의 폭과 깊이가 다르다. 따라서, 전체학급을 대상으로 하는 수업 중이라 할지라도 개별적 학습을 염두에 두어야 한다. 학생들의 수학적 이해력이 저하된다는 염려의 목소리가 높아지고 있다. 이는 학생들이 이해를 바탕으로 한 수업을 받아 보지 못하기 때문이며, 이런 원인은 아마도 교사 자신이 이해를 바탕으로 한 수업 경험이 간접적으로든 직접적으로든 없기 때문일 것이다. Kamii가 실시한 수업이 학생 스스로 수학을 학습할 수 있다는 구성주의 원리를 적용한 성공적인 사례이며, 이와 같은 방향으로의 교수법의 변화가 있기를 기대한다.

  • PDF

Research about Thermoacoustic Resonance Ignition (열음향 공진 점화에 대한 연구)

  • Seo, Seonghyeon;Kang, Sang Hun;Bae, Jong Yeol;Lee, Jin Young
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.20 no.1
    • /
    • pp.82-89
    • /
    • 2016
  • The unique phenomenon that jet flow kinetic energy is converted to thermal energy through thermoacoustic resonance can be applied for the multiple ignition of liquid rocket engines. The present article includes the basic principle and theory behind the phenomenon as well as major outstanding, previous research works. The thermoacoustic phenomenon is affected by underexpanded jet flow characteristics from a nozzle, geometries of a nozzle and a resonance tube, and chemical composition of jet flow. The paper concludes with discussion what should be considered as crucial issues for the future research on the development of a multiple ignition system of liquid rocket engines.

Efficient Filtering for Depth Sensors under Infrared Light Emitting Sources (적외선 방출 조명 조건 하에서 깊이 센서의 효율적인 필터링)

  • Park, Tae-Jung
    • Journal of Digital Contents Society
    • /
    • v.13 no.3
    • /
    • pp.271-278
    • /
    • 2012
  • Recently, infrared (IR)-based depth sensors have proliferated as consumer electronics thanks to decreased price, which led to various applications including gesture recognition in television virtual studios. However, the depth sensors fail to capture depth information correctly under strong light conditions emitting infrared light which are very common in television studios. This paper analyzes the mechanism of such interference between the depth sensors relying on certain IR frequencies and infrared light emitting sources, and provides methods to get correct depth information by applying filters. Also, it describes experiment methods and presents the results of applying multiple combinations of filters with different cut-off frequencies. Finally, it proves that the interference due to IR can be filtered out using proposed filtering method practically by experiment.

Experimental Investigations of Systematic Errors in Wind Tunnel Testing Using Design of Experiments (실험설계법 기반 풍동시험 시스템 오차 검출 실험연구)

  • Oh, Se-Yoon;Park, Seung-O;Ahn, Seung-Ki
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.5
    • /
    • pp.335-341
    • /
    • 2013
  • The variation of systematic bias errors in the wind tunnel testing has been studied. A Design of Experiments(DOE) approach to an experimental study of fuselage drag and stability characteristics of a helicopter configuration was applied. When forces and moments measured in one time block differ significantly from measurements made in another time block under assumption that sample observations can be expected to yield same results within permissible measuring errors. The practical implication of this paper is that the systematic error can not be assumed not to exist. The those error reduction could be achieved through the process of randomization, blocking, and replication of the data points.

Novel RPWM Techniques for High-Speed Three-Phase Induction Motor Drive (고속 3상 유도전동기 구동을 위한 새로운 RPWM 기법)

  • 권수범;이효상;박종진;김남준
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.4
    • /
    • pp.364-371
    • /
    • 2004
  • This thesis is proposing novel RPWM(Random PWM) techniques that can locate PWM pulse to do random. RPWM techniques to propose locates SVPWM(Space Vector PWM) pulse by number of each random and principle to locate of pulse applies different random function and locate pulse. For propriety verification of proposed techniques, achieve an simulation and experiment that use MATLAB/SIMULINK about proposed RPWM techniques algorithm and IGBT inverter composition that use DSP(TMS320C31). Specially, analyze harmonic spectra of inverter output current when the induction motor speed is more than 10,000 rpm, confirm that RPWM's effect in high speed degree appears. Proposed RPWM techniques propriety prove from reduction effect of harmonic magnitude that corresponds to an integer times of switching frequency.

Zero-Transient current control method for PWM dimming of LED (LED backlight PWM dimming시 과도구간이 존재하지 않는 전류 제어 기법)

  • Yoon, Young-Nam;Lee, Sang-Hyun;Cho, Sang-Ho;Hong, Sung-Soo;Roh, Chung-Wook;Han, Sang-Kyoo;Oh, Dong-Seong;Lee, Hyo-Bum
    • Proceedings of the KIPE Conference
    • /
    • 2010.07a
    • /
    • pp.162-163
    • /
    • 2010
  • 본 논문에서는 LED조명의 휘도조절을 위해 PWM dimming시 발생하는 LED전류의 과도 상태제거를 위한 전류 제어 기법을 제안한다. 제안된 LED전류 제어 기법은 과도상태가 존재하지 않으므로 Dimming신호의 동작 시비율이 매우 작은 영역에서도 전류 제어를 통해 낮은 휘도를 정밀하게 표현할 수 있다. 또한 전류의 Overshoot이 발생하지 않으므로 휘도를 일정하게 유지할 수 있는 장점을 가진다. 본 논문에서는 제안된 LED전류 제어 기법의 동작원리를 설명하고, LED휘도 조절을 위한 전원시스템을 구현하여 PSIM 을 통해 제안된 기법의 타당성 및 우수성을 검증한다.

  • PDF

Development of Spherical Aberration Simulation Program for Education using Visual Basic.net (Visual Basic.net을 이용한 구면수차 시뮬레이션 교육 프로그램 개발)

  • Seo, Jeung-Ik
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.12 no.4
    • /
    • pp.83-86
    • /
    • 2007
  • In this study, a program has been developed to enable a simulation of spherical aberration - originated from a spherical surface and an aspheric surface - via ray tracing and calculation of the degree of spherical aberration. This process has been verified for the variation of spherical aberration generated from ray tracing for aspheric surfaces such as an oval, a parabola, and a hyperbola. By comparing it with the spherical surface, the principle and necessity of the aspheric surface lens design have been understood. In addition, it allows confirming the accuracy of the simulation by developing a ray tracing program in relation to the mirror plane of a parabola.

  • PDF

The Simulation of Upwelling Flow Using FLOW-3D (FLOW-3D 모형을 이용한 용승류 모의)

  • Oh, Nam-Sun;Choi, Ik-Chang;Kim, Dae-Geun;Jeong, Shin-Taek
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.23 no.6
    • /
    • pp.451-457
    • /
    • 2011
  • Large scale fishing ground can be made by upwelling flow. Recently the fishing ground development projects, using artificial upwelling by large structure under the sea, are in progress in Japan and Korea. In this study upwelling flow is simulated with FLOW-3D model. Using the movement of marker in FLOW-3D, the method for simulating upwelling of nutrients was experimented. The results show that FLOW-3D model can evaluate upwelling effect before starting real project.