• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2015

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) is distinguished from the normal concrete by outstanding compressive and tensile strength. Cracked normal concrete resists shear by aggregate interlocking while clamped by transverse reinforcement, which is called as shear friction theory. Cracked UHPFRC is expected to have a different shear transfer mechanism due to rather smooth crack face and post-cracking behavior under tensile force. Twenty-four push-off specimens with transverse reinforcement are tested for four different fiber volume ratio and three different ratio of reinforcement along the shear plane. The shear friction strength for monolithic concrete are suggested by limit analysis of plasticity and verified by test results. Plastic analysis gives a conservative, but reasonable estimate. The suggested shear friction factor and effectiveness factor of UHPFRC can be applied for interface shear transfer design of high-strength concrete and fiber reinforced concrete with post-cracking tensile strength.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.731-739
• /
• 2008

To evaluate the fiber orientation characteristics and estimate its effect on the flexural strength of steel fiber reinforced ultra high strength concrete with directions of concrete placing, we developed an image processing technique and carried out the flexural test to quantify the effect of fiber orientation characteristics on the flexural strength as well. The image processing technique developed in this study could evaluate quantitatively the fiber orientation property by the use of dispersion coefficient, the number of fibers in a unit area, and fiber orientation. It was also found that the fiber orientation characteristics were dependent on the direction of concrete placing. Fiber orientation characteristic was revealed to strongly affect the ultimate flexural strength, while hardly affecting the first cracking strength. Theoretical model for flexural strength was applied to compare with test results, which exhibited a good agreement.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.170-175
• /
• 2011

최근 고강도 콘크리트의 내화성능이 사회적 이슈로 부각되고 국토해양부에서 고강도 콘크리트의 내화성능 관리기준(안)이 고시되면서 국내에서도 고강도 콘크리트의 내화성능을 향상시키기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 유기질 섬유인 폴리프로필렌섬유(PP섬유)와 강섬유를 하이브리드한 Fiber Cocktail를 혼입한 고강도 내화콘크리트 개발을 위한 연구를 수행하였다. PP섬유는 $160^{\circ}C$의 온도에서 용융되어 콘크리트 내부에 미세한 통로를 형성하여 고강도 콘크리트 부재 내의 수증기압 및 공극압을 효과적으로 배출하여 고강도 콘크리트의 폭렬발생을 억제시키는 데 효과적이며, 강섬유는 PP섬유가 용융된 후의 고강도 콘크리트 부재의 균열 발생을 억제하며 외부로부터 침투하는 열기를 차단할 수 있다. 100MPa 고강도 콘크리트의 내화실험을 실시하여 최적단면 조건을 도출하기 위해 철근온도를 분석한 결과, 단면이 커질수록 철근온도는 점차 낮아지는 경향이 나타났으며 $600{\times}600mm$, $800{\times}800mm$ 단면에서 내화성능을 확보할 수 있는 것으로 나타났으며, 이중 경제성을 고려할 경우 $600{\times}600mm$ 단면이 최적단면으로 도출되었다. 또한 도출된 $600{\times}600mm$ 단면에 대해서 철근의 온도를 분석한 결과 PP섬유 $1.5kg/m^3$와 강섬유 $40kg/m^3$를 배합한 Fiber Cocktail이 최적배합비로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.25-34
• /
• 2015

Proposed equation is used many time in calculation of concrete compressive strength using the non-destructive testing at precision safety diagnosis. Most of proposed equation is suggested in abroad and have an error to estimate concrete compressive strength in the domestic. Therefor, proposed equation is low reliability to estimate concrete compressive and it has a significant effect in reliability of precision safety diagnosis. Nevertheless, It is possible to increase the reliability through a number of experiments from this problem that occurs in some localized part. This paper is proposed assessment formula of reliability related core compressive strength to increase the reliability. It is verified that reliability of proposed assessment formula is useful by probabilistic techniques. It is compared with each graphs of concrete compressive strength of proposed equation. It has been found that the present methods are very efficient.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.129-136
• /
• 2012

Compression splices are required for all compression members in almost all of the floors in high-rise buildings. Therefore, a clear understanding of the behavior of compression splices can provide a rational design of compression splices. Tests of compression splices with bearing only and bond only cases were conducted to investigate the component resistance characteristics of compression splices. Test results showed that the circumferential tensile stresses induced by bearing and bond overlapped at the end of the splice length deterred bond and bearing splices from developing target splicing strength when both normal bond and bearing splices were used. In particular, the bearing strength was more significantly reduced than the bond strength since the bearing relied on the limited area near the end of the splice length. However, the strength of the normal splice was always higher than the strength of the bond only or the bearing only case. Consequently, the study results showed that splice strength in compression cannot be improved by means of removing bond or bearing. In addition, the bond strength in bond only splices was nearly same as the bond strength in tension splices and the strength increase of compression splice is attributed to end bearing only characteristic.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.84-89
• /
• 2021

In 2017, the Gyeongju earthquake caused many casualties and considerable property damage by overturning and dropping blocks and bricks. Various reinforcement techniques were proposed, but some problems, such as short length or difficult construction, were encountered. Therefore, this study proposes a long-rawlplug screw anchor to improve the existing rawlplug anchor and conducts an experiment to evaluate the pullout strength. Variables in the pullout test were the compressive strength of concrete and the embedded length of the long-rawlplug screw anchor. According to the results, the pullout strength of the long-rawlplug screw anchor increased as the compressive strength of concrete increased, and they were not affected by the embedded length. Rather, it was found that the screw length of the long-rawlplug was important to the pullout strength.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.224-227
• /
• 2007

마이크로파 센서 자료를 이용하여 태풍 강도를 산출하고자 TRMM TMI로부터 관측된 자료와 태풍 강도의 최대 상관성을 나타내는 지역올 찾고 최적의 상관 변수를 선정하였다. 분석기간은 2004년 6월부터 9월까지 발생된 태풍으로써 18개의 사례이다. TMI로부터 관측된 85 GHz 채널의 밝기온도，구름내 총 수증기량，얼음양，강우 강도，잠열방출양이 태풍 강도와의 상관성 분석을 위한 변수로 분석되었다. 태풍의 강도는 RSMC-Tokyo에서 발표된 Best track의 최대 풍속 자료를 이용하였다. 위성 관측 변수를 태풍 중심으로부터 공간 평균하였을 때 반경 2.0-2.5도 정도의 평균거리에서 최대의 상관성을 보였다. 위성 자료로부터 태풍 중심 풍속을 추정하기 위하여 회귀분석을 하였다. Best track과의 오차는 85 GHz 밝기온도와 수증기량을 이용한 다중 회귀 분석에서 오차가 최소를 보였다. 한편， 태풍강도 예측을 위한 통계모델에 마이크로파 위성 자료를 예측인자로 입력하여 태풍강도의 정확도가 3-6%정도 향상됨을 보였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.73-82
• /
• 2001

본 연구는 실험적 방법과 해석적 방법을 통하여 반복하중을 받는 ├형 철근콘크리트 접합부의 전단특성을 파악함을 목적으로 한다. ├형 접합부는 고강도 재료의 사용으로 인한 체적의 감소 뿐만 아니라, 지진발생 시 반복하중의 작용으로 인한 변동축력 등으로 , 구조적으로 취약한 부분이 될 가능성이 있다. 따라서 본 연구에서는 ├형 접합부의 전단특성을 파악하기 위하여 기동축력, 콘크리트 압축강도, 접합부 전단보강근비를 변수로 한 12개의 실험체를 제작하여 가력실험을 수행하였다. 또한, 유한요소 해석을 수행하여 본 실험결과와의 비교 검토를 통하여 타당성을 검토한 후, 기둥축력과 콘크리트 압축강도의 변화에 대한 변수해석을 통하여 접합부의 전단강도에 미치는 변수는 영향을 파악하였으며, 실험에 의한 실험체의 전단내력을 기존에 제안된 AIJ, ACI 규준 등과 비교 검토하였다. 본 연구의 결로부터 기둥축력과 콘크리트 압축강도가 ├형 철근콘크리트 접합부의 전단강도에 미치는 영향을 확인하였다.

• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.435-445
• /
• 2005

Landslides induced by heavy rainfall from typhoon 'Rusa' in 2002 and typhoon 'Meami' in 2003 were investigated at Samcheok area, and the relationship between landslides and rainfall on that area was analyzed. The average annual rainfall at Samcheok area is generally $1,200mm\~1,300mm$. However, the average annual rainfall at samcheok for 2003 and ton was increased more than 2,000mm because of typhoon 'Rusa' and typhoon 'Meami'. The number of landslides and the landslides area are largely occurred in a area of the relatively high maximum hourly rainfall and 2days cumulative rainfall. Therefore, it confirmed that landslides are directly depended on the hourly rainfall and the cumulative rainfall. The landslides at Samcheok area induced by heavy rainfall due to typhoon are more influenced by the maximum hourly rainfall at the landslide occurrence day. In order to predict a rational landslide size, a new method included the maximum hourly rainfall and the landslide area in a traditional way was proposed. As the result of applying the new proposed method, the landslide size at Samcheok area is involved in the large scale landslide.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.123-128
• /
• 2008

This study inquired into changes of turbidity of a river depending on the rainfall characteristics of each month through investigating the water quantity and turbidity of Jawoonchun drainage basin in the upper reaches of Soyangho (lake) for the year of 2005. It could be seen from the study that high turbidity occurred during the period from May to August due to rainfall intensity and rainfall duration. On the other hand, it could be confirmed that turbidity was constantly low after September because of early cleansing effect of rainfall. Next, the influence of controlling factors of turbidity was looked into. For May and June, it was 89% rainfall intensity among the controlling factors, for July and August, it was 67% rainfall intensity and 32% rainfall duration that was confirmed to have influence over the occurrence of turbidity. In addition, regression analysis was carried out about the controlling factors that had influence over the occurrence of turbidity and regression equation was suggested.