• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.69-77
• /
• 2018

Launching system is designed to store the payload, withstand the rigors, and prevent it from rusting and damaging. The behavior during initial deployment of the missile is determined by production, assembly and insertion condition of a launching tube and a missile. The purpose of this research is to confirm the safety of a launching tube by statistically analyzing behavior of the missile, during initial deployment stage. Error parameters which effect initial behavior of the missile are selected and analyzed through Monte-Carlo Simulation. Based on the result of simulation, tip-off and stress distribution between rail and shoe is predicted by using the commercial analysis program called Recurdyn. Lastly, the safety factor is calculated based on yield strength of the material and maximum stress of the rail during the process of launching. The safety of the launching system is verified from the result of the safety factors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.423-433
• /
• 2022

This paper introduces the case studies of launch environmental test for cube nanosatellites and lessons learned of the design and integration from those. Generally, nanosatellites are launched and deployed in space while being contained in nanosatellite deployers, mechanical loads of launch are transferred through the deployer. This characteristic make nanosatellites under larger loads and higher possibilities of mechanical failure. This study represents guidelines of the design and the integration of the nanosatellites by showing the cases of launch environmental test of nanosatellite system. Moreover, it is suggested that the modern nanosatellite deployer with the capability of fixing the internal nanosatellite be preferable to conventional deployer by comparing the test results with those deployers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.541-547
• /
• 2010

This document presents the research and result about localization of the fiber-based launching canister of rolling missile which has helical rails. This document is about the technical process development which is included with the manufacturing of helical rails and application of the flame spaying which is different with other the fiber-based launching canister in korea. and And this document is about quality Assurance procedure through the qualification test and structural evaluation in conditions that the canister has to have in real shipboard environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.922-931
• /
• 2017

This research paper describes design procedures and those verification with multi-body dynamic analysis and an experiment for the development of an unprecedented type of canister cover, named as the separating cover. In order to overcome drawbacks from the precious rupture type and actuator driven cover, the separating cover was suggested. It has the simplest structure composed of the previously developed explosive bolt and a spring-lever driven system. First of all, mechanical feasibility with proposed design parameters based on mathematical modeling was confirmed through dynamic analysis and then its results showed good agreement with the followed empirical results acquired from a high speed camera. On top of that, a parametric study was conducted to identify the effect of each design parameter on separating performance. It is highly expected that this research contributes to provide military industries with a brand new canister cover having simplicity and cost efficiency and thus it will be very useful in MLRS(Multiple Launch Rocket System).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.154-157
• /
• 2005

MLRS is the weapon system which has been mass-produced since 2004. MLRS launch tube has developed and produced independently refer to the facilities and process condition of General Dynamics Co, USA. The purpose of this research is base establishment for the launch tube performance improvement and application of another weapon system. Research performed about material property, process condition, and structural property.

• Defense and Technology
• /
• no.9 s.259
• /
• pp.48-55
• /
• 2000

최근 수직발사 유도무기체계에서 발사관 안에 설치된 사출장치를 이용하여 유도탄을 밖으로 사출시킨 후 유도탄의 추진기관을 점화시켜서 발사하는 가스사출발사 방식을 채택하고 있다. 가스사출발사 방식은 유도탄 발사에 소요되는 에너지를 감소시킬 수 있기 때문에 유도탄 본체 하중을 줄일 수 있고, 함정에서 발사되는 수직발사 유도무기체계에 가스사출발사 기술을 적용하면, 밀폐된 공간에서의 화염처리장치가 필요 없기 때문에 한정된 공간에 비하여 유도탄의 탑재수량을 늘릴 수 있고, 발사장치를 크게 단순화 할 수 있다.

• Journal of Space Technology and Applications
• /
• v.1 no.3
• /
• pp.319-336
• /
• 2021

This paper discusses the results of launch environment tests for the engineering qualification model (EQM) of nanosatellite Scale magNetospheric and Ionospheric Plasma Experiment (SNIPE) for scientific missions and lessons learned for the design of nanosatellites. SNIPE is a group of four formation-flying 6U nanosatellites with a range of payloads for missions including space weather measurement. We developed the EQM to verify the preliminary design prior to fabricating the flight model. Launch environment test of EQM was conducted for the first time in 2019, and all failures were corrected and verified at the second test conducted in 2021. A notable point of the two tests is that the nanosatellite deployer used in the first test is different from that of the second test. The second deployer has the capability to fix the internal satellite whereas the first deployer just contains and deploys the satellite. Thus actual mechanical loads the satellite receives is reduced for the second test compared to the first test. This work compares the mechanical responses of two tests and proposes general guidelines for structural design of nanosatellites.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.147-153
• /
• 1996

발사관의 밀폐 및 분리성능을 위해 앞, 뒤 덮개의 재질을 내열성이 높고, 수분흡수성이 낮은 Noryl Plastic 재질로 선정하여 기계적 물성을 확인하였으며 덮개의 형상설계를 하였다. 유한요소 구조해석을 수행하여 분포하중 및 집중하중에 의한 응력상태를 고찰하고 분리성능을 검증하기 위해 공압 및 유도탄 충돌시험을 수행하였다. 이상의 과정를 통하여 개발된 덮개는 여러 가지 체계요구조건을 만족시켜 주는 것을 알 수 있다.

• Journal of Space Technology and Applications
• /
• v.3 no.1
• /
• pp.72-85
• /
• 2023

Most Nanosatellites are launched in nanosatellite deployers. Nanosatellites in the deployer are turned off during launch, and they start boot sequence after deploying at their mission orbit. For this reason, nanosatellites must have deployment switch. Most of the nanosatellite deployment switch has two part, first is electric switch to boot the satellite system and second is mechanical assembly to push the switch. In most cases, electric switches are installed in the satellite main body, and the switch operations are translated via the mechanical assembly. These implementations are mechanically complicated and hard to guarantee the appropriate operation without the problems due to friction between pusher and satellite structure. This paper proposes the another implementation method of deployment switch for nanosatellites by installing the electric switch outside the main body without any kind of mechanical parts.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.23-23
• /
• 2000

대표적인 잠수함 발사 유도탄의 수중에서의 발사 개념에 대한 기술 동향을 분석하였다. 세계 각 국의 수중 발사 유도탄 중 발사 형태가 특히 다른 Tomahawk, Sub Hapoon, Exocet SM39 유도탄에 대하여 그 발사 방법에 따른 기술 동향과 장단점을 비교 분석하였다. 대표적인 서방 세계 수중 발사 유도탄인 Tomahawk는 여러 가지 다른 형태가 있지만 잠수함 발사는 Wet Capsule에 의해 보호되며 어뢰 발사관을 이용하여 압축수에 의해 수중으로 배출되는데 잠수함과의 안전거리에서 견일줄이 유도탄 진행에 따라 장력을 발생 부스터를 점화시킨다. 이 부스터에 의해 수면까지 부상하며 부스터에 설치되어 있는 수중궤적 제어용 Jet-Tab이 수중운동을 제어한다. 수면에서 부스터의 추진력에 의해 대기로 진입하는데 일정속도 이상으로 가속된 후 부스터를 분리시키며 Turbo 엔진이 점화되어 계속 비행하게 된다.(중략)